Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"HAMMOND SOLOVOX TONE CABINET & KEYBOARD - BOTH ARE MODEL J/SERIES A. TONE CABINET SERIAL # IS 39282 - KEYBOARD SERIAL # IS 38181. I FOUND THIS AT A LOCAL COUNTRY ESTATE SALE. DON'T KNOW MUCH ABOUT IT BUT DID FIND LOTS OF INFORMATION ONLINE, INCLUDING WIRING DIAGRAMS. IT APPEARS TO BE COMPLETE INCLUDING ALL 14 TUBES. THIS ITEM IS SELLING FOR RESTORATION OR PARTS."
Note: links to listings are affiliate links for which the site may be compensated.
via this auction yousenditworks
"For sale is a vintage EML 200 analog synthesizer. Very rare and this one is in MINT condition, looks fantastic and is working great. A cool 1/4" patchable synth with its own unique sound, similar to an Arp2600. Perfect companion for an EML 100 or 101. These don't show for sale more than once every couple years, and you'll never find another one in this nice condition! See pictures below for more details. Don't miss out!"
2 x Cyndustries Eurorack Zero Oscillator with tiny jacks! 4ms Peg Alesis Metavox Vocoder TSM & Uncle Analogue Systems RS 110 RS 360 Doepfer 4xA 134 pan by Moog MP 201& Korg SQ10 Flame Chord Machine Unkle chords by Roland 104 Sequencer Talking Synth Modul to MetaVox Make Noise Maths Moddemix Optomix QMMG Wogglebug Malekko 4 x Anti O 4x Unkle Bass Roland System 104 Sequencer SSL Modulation Orgy Toppobrillo Sportmodulator Master Clock Logic via Kenton Pro 2000 II and 2x 4ms RCD Drums and Korg Micro X 12/8 http://www.muffwiggler.com/forum/viewtopic.php?t=59876
YouTube Published on Jul 26, 2012 by Richarius Molindarius
"Firstly - this video is of my noise machine playing a DRONE piece. Not neksays-sarah-lee, will everyone be into that. :O :) Right then - this piece consists of 4 x CMOS CD4093 oscillators. 2 of them are being voltage controlled by each their own, SLOW Low Frequency Oscillators. One does a full cycle about every 30 seconds and the other a full cycle about every 3 minutes. Though you wont hear the stereo in this video: - 1 stable oscillator is panned hard left - 1 stable oscillator is panned hard right - the 2 Voltage Controlled Oscillator's outputs are both going into a single XOR Gate. The output from it, is going into the mono input of a TC Electronics stereo delay, set up for panning between the left and right at about 0.5hz or, once every 2 seconds ... roughly, with a LOT of feedback. The stereo outs are mixed with the hard panned oscillators and that is sent off to the amplifier.
This piece is 7 or 8 minutes long. If I can get my digital recorded hooked up, I'll record a much longer version of it for posting on my Richarius soundcloud site.
"Tachyon allows images and sound to become one as they magically blend under the user's fingertips. Each note played is an individual expression, allowing independent control of pitch and tone far beyond that of traditional instruments. Most instruments only allow the user to play one sound at a time, but with Tachyon they can seamlessly blend between any two sounds as they slide their fingers up and down the screen. Get it on the app store here:" Tachyon - Jordan Rudess: Wizdom Music, LLC
YouTube Published on Jul 26, 2012 by raulsworldofsynths
"Part Two of the demonstration of the high and low stages of the A188-2 Tapped BBD Delay Module.Next segment in series Doepfer A188-2 Tapped BBD Delay Module Multiple Stages-Multiple Mixes .Sound and Video by Raul Pena."
Originally posted here back in 2005, the Organix JX-3P MIDI Expansion Kit is now available again. You can find it here.
"The Roland JX-3P synthesizer is a nice analog synth produced in 1983. Today people still use this synth very often. The JX-3P was one of the first synthesizers with MIDI. The sounds can be edited from the frontpanel and with a PG-200 programmer. One of the biggest disadvantages is that the MIDI functionality is very limited. No SysEx or CC support was implemented. It is impossible to edit the sounds via MIDI. The second disadvantage is that the PG-200 programmer and the MIDI-IN can not be used simultaneously.
To solve these shortcomings, a JX-3P MIDI Expansion kit is designed. This kit is the result of many months reverse-enginering and designing. It adds a lot more MIDI functionality to the Roland JX-3P synthesizer.
- simultaneous use of the MIDI Input and PG-200 - control the JX-3P realtime with standard MIDI CC messages. (i.e. with a MIDI-Knob controller). - all knobs and switches on the PG-200 send out standard MIDI CC messages. - select the MIDI channel on the JX-3P as 1, 2, 3 or OMNI - velocity sensitivity (MIDI input only, not the keyboard)"
