MATRIXSYNTH


Friday, August 31, 2012

Sequential Circuits SCI Pro-One Model 100 SN 5235

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

Moog Voyager Old School Analog Synth

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

ROLAND Jupiter 8 Classic Analog Synthesizer SN 141241

Note: Auction links are affiliate links for which the site may be compensated.
via this auction
technoempire

Listed as mint. You'll find tons of pics at the listing while up.

Grendel Drone Commander Synth

Note: Auction links are affiliate links for which the site may be compensated. via this auction

"with a total of 9 knobs, the drone commander offers two manually-tuned oscillators and two lfos, plus an unusually colorful and nasty filter. lfo1 is an analog variable-shape oscillator, and lfo2 is a pulse waveform that auto-synchronizes to lfo1 at a ratio of 2x, 4x, 8x, or 16x. both lfos can be routed to the filter for rhythmic patterns. a line-level output jack is provided for connection to amplifiers or effects.

six of the drone commander’s nine knobs double as push-pull switches to control signal routing and waveform selection. scroll to the bottom of this page to view the control layout."

Orange Doepfer A-100lc6 Eurorack Suitcase

Note: Auction links are affiliate links for which the site may be compensated. via this auction

"Doepfer A-100lc6 Eurorack Suitcase (painted orange) with carrying handle.

Excellent condition. $390 new price.

The a-100 low cost suitcase is an inexpensive, open front variant of the a-100p. the case frame is simple and does not contain the front lid, amongst other differences. the housing is manufactured from raw wood. the housing can later be painted, for example with the help of a lacquer spray box by the customer in each desired color.

The housing is produced with a net entrance at the back. dimensions: outside approx. 445 x 275 x 160 mm , inside: 2 x 84 width unit x 3 he, usable depth for a-100 module: approx. 90 mm within the range of the power pack (right down), otherwise approx. 110 mm (counted starting from the inside of the front plate). no sensitive audio modules should be mounted near the power pack. we recommend to place control voltage modules (e.g. lfo, adsr, trigger delay, clock teiler/sequencer, sequencer, slew limiter, midi interface, etc.) within this range only, and no audio modules (e.g. vco, vcf, vca, vcp, frequency shifter, ring modulator, etc.). in this range the depth is also somewhat smaller, so deeper modules (e.g. a-113 or a-126) will not fit near the power pack."

I usually associate orange eurorack cases with Monorocket.

Circuit Bent ClearTone Sequencer Synth Part 1 by freeform delusion


YouTube Published on Aug 31, 2012 by freeformdelusion

"ClearTone Sequencer Synth Part 1

This is to show what the synth does on its own without the sequencer running. You flick the switch left to control the synth on its own via the three centre knobs. It also has a three way switch for synth tone selections.
I've done another video for the sequencer which I'll link on here once its uploaded.

.fd. online
Facebook - http://www.facebook.com/pages/freeform-delusion/144587583120
Twitter - http://twitter.com/#!/freeformd
eBay -" freeform-delusion (RSS)

Update:


YouTube Published on Sep 1, 2012 by freeformdelusion

"ClearTone Sequencer Synth Part 2 - This video shows the sequencer part of the unit. A huge range of sounds can be produced from this sequencer.

On/Off Toggle Switch,
1/4inch mono jack output,
Start Button - Press the start button more than once and you can get extra LED steps running to change the sequence even more,
Stop Button - This stops any sequence running so you can start again,
Sequencer Speed Control - Super slow or Ultra fast,
Tune Knob - This can make the unit go deeper and also ask as a a volume control,
Three Blue Knobs - This is the synth part of the unit, shape the sound using these,
Tone Selection Switch - 3 way switch with synth sound alteration on each one,
Two Blue & One White LEDs,
8 Step Sequencer with Red LED indicators and 8 Controls to tune each step of the sequencer,
Runs on a 9v PP3 battery

.fd. online
Facebook - http://www.facebook.com/pages/freeform-delusion/144587583120
Twitter - http://twitter.com/#!/freeformd
eBay -" freeform-delusion (RSS)

Ayoshutduff - Tron Legacy ( Sunvox Cover)


YouTube Published on Aug 31, 2012 by ayoshutduff

"I loved the Tron films and Daft Punk, so I figured why not do a chiptune version :D
----Download Link Below-----


Tron Legacy Chiptune (FLAC):
http://www.mediafire.com/?nzhpyl7grro4lf0"

Sunvox is available on iTunes:
SunVox - Alexander Zolotov
iPads on eBay
iPod Touch on eBay


Erthenvar Patch Chord Details and Specs

"Erthenvar Patch Chord - a bank of 25 "Oscillator Controlled Oscillators", which can be used to generate chords in a Eurorack system.

The Patch Chord continously samples the cycle duration and duty cycle of the input waveform. It outputs 12 semitone steps above the input note, 12 semitone steps below the input note, and the root note itself (available from two output jacks). All outputs are pulse waveforms with continuously variable pulse width.

An oversized tri-color LED spans the color spectrum in each octave, so each note has a unique color! The input jack is passively multipled to an output jack so the visual effects of the LED can be had even if the module is not part of the current patch.

There four modulation types available, each with an input jack and a three-position switch. The switch can turn off the modulation, allow the CV value to control the parameter, or turn on the modulation. The modulation jacks are all DC coupled and respond to audio rate signals, though the tracked waveform has a lower limit of around 20 seconds per cycle.

The SQR modulation forces the tracked duty cycle to 50%, making all of the 25 outputs into square waves
The INT modulation changes the relationship between each output from a semitone step to an integer or harmonic step
The ZERO modulation resets all of the output counters to 0, similar to a sync function
The HOLD modulation stops tracking the input and keeps the last counted cycle duration and duty cycle values

This module requires +5V from the bus board! We offer the freelunch as a +5V solution.

Features

Eurorack power cable and M3 screws are included
A total of 25 oscillator outputs tracked from 1 input
RGB LED with color-per-note functionality
Four "ACV" audio rate CV inputs
C&K switches

Specifications
Eurorack horizontal pitch 22 HP
Depth 60 mm (2.36")
Maximum Input Current (+5V) 65mA
Maximum Input Current (+12V) 65mA
Maximum Input Current (-12V) 65mA
Input Impedance 112kΩ
Input Threshold 600mV
Output Impedance 1.2kΩ
Output Swing +/-5V"


Note, these videos have been previously featured on the site, but here they are in one giant 17 part playlist.

Moog Little Phatty Keyboard Synthesizer SN SE 00574

Note: Auction links are affiliate links for which the site may be compensated.
via this auction
lighthouse_sound (RSS)

"Moog Little Phatty Keyboard Synthesizer in very good condition. Includes manual on CD and power cable.

The Little Phatty is the next great thing to emerge from the revitalized Moog Music synthesizer company. It is sort of a notch below the Voyager, but should not really be categorized as such because the Little Phatty is a powerful synth with a layout and design that looks less into the past and more towards the future.

The Little Phatty boasts a 100 percent analog signal path, 100 user editable presets and a 37-note keyboard. It is a monophonic synth with two oscillators (the Voyager has three osc). Waveform selector is continuously variable between waveforms (tri, saw, square, pulse) and there is oscillator-sync. The filter is the classic Moog ladder design. Two ADSR envelope generators are available for the volume and the filter. And finally a nice LFO with six waveshapes, four destinations and rate/depth controls helps to get things moving. The 'Master' section of the keyboard has controls for Tuning, +/-2 Octave Transpose, Glide, Pitch/Mod wheels and some data entry controls. There are no on-board sequencers or effects."

Monorocket M9104 Eurorack Case

Note: Auction links are affiliate links for which the site may be compensated. via this auction
Noisebug (RSS)
Monorocket has upgraded the M9C case to the new M9104! Now wider at 104hp and with an internal auto switching power supply for international use.

Manufacturer Description:
Case color: Black
Eurorack Enclosure
3 rows x 90HP
3.5A via Universal Switching PSU's, international power 120v and 240v
Sliding nut mounting system
includes mounting screws, IEC power cable
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH