MATRIXSYNTH

arange noise machine dr.moonstien

Note: links to listings are affiliate links for which the site may be compensated.

Published on Jan 8, 2013 drmoonstien·269 videos

"HAND BUILT NOISE MACHINE for sale on ebay"

"THis is a hand built noise machine built by [drmoonstien]. it comes with an optical theremin controller that connects via 1/4 inch standard audio cable. it also has line in for audio input. So this machine has clean volume , scuzz volume and synth volume. vco main pitch toggle on off and potentiometer for adjusting pitch.and 2 different lfo's with on off toggle and potentiometer. then there are 5 octave dividers for further modulation. the line in is effected by the scuzz side witch has toggle on off and 5 octave dividers of its own you can blend the octave scuzz effects in with the clean audio or just use the effected sound there is no bypass just on and off. when an instrument is not plugged in you can effect the synth sounds with the octaves of the scuzz. the optical theremin can be connected to control the pitch of the vco the theremin has its own toggle on off switch so you can easy switch between controls. the optical theremin reacts to light so the more light that hits the sensor the higher the pitch the less light .like if you cover it the lower the pitch. you can play buy waving your hand or using a flash light or laser pointer any kind of light. runs on 9vdc -tip power supply boss or one spot will work fine.(((POWER SUPPLY AND CABLES NOT INCLUDED ))) all ins and outs are 1/4 inch standard..."

Night Bird Gerçek Dorman ios Music

Published on Dec 24, 2012 gercek dorman·127 videos

"Here is my new song "Night Bird" which is made with Magellan, Animoog, Daw MultiTrack, iKaossilator and Drumjam applications by using Audiobus aplication. Enjoy."

Divison 6 Mattson Mini Modular Eurorack SQ816 Sequencer Demo

Published on Jan 8, 2013 matrixsynth·247 videos

The ending is the best part. Turn it up. I do not take responsibility if this sequence gets stuck in your head.

http://division-6.com
http://mattsonminimodular.com

5% discount with free domestic shipping until Sunday, Jan 13, 2013.

A simple sequence featuring the Division 6 eurorack format SQ816 sequencer by Mattson Mini Modular & Division 6. Two MMM VCOs & one Subconscious Communications Model 37 Voltage Controlled LFO / Utility Oscillator used as an oscillator for the high pitched sequence. A Juno-106 being driven by the SQ816 MIDI out comes in for that bonky wooden sound. Drums are provided by Tiptop Audio BD8008, SD808, and HATS808 modules. Reverb & Phaser provided by TC Electronic M300. You'll see me change the sequence to reverse followed by ping pong. I then apply an MMM LFO to the CV in which modulates everything being driven by the CV sequence. Note the Juno-106 is not affected over MIDI, which is nice in my opinion. It allows me to only apply modulation to certain aspects of the sequence. I then adjust the sequence rate for the grand finale. Enjoy, or not...

Division 6 & Mattson Mini Modular SQ816 Info Sheet & Pre-Orders

via Mattson Mini Modular on Facebook

"Division 6 and Mattson Mini Modular are in the primary phases of production for this sequencer that we've put a year of our lives into developing....

We've extended our pre-order 5% discount with free domestic shipping until Sunday, Jan 13, 2013.

Now's the chance to grab one of these awesome little systems before we're neck deep in production :)"

http://division-6.com
http://mattsonminimodular.com

Custom Mattson Logo Knob

via Hewson Chen on Facebook

"a replacement knob for my mattson mini modular. since my machine prints in only one color, i am experimenting with different ways to keep the "M" white but the rest of the knob black. Here, i masked the M with tape and sprayed the rest black, to somewhat mediocre results. probably the next thing i will try is spraying the whole thing black and then painting the M white again...?

also, it's hard to see from the top view, but the new makerbot firmware just recently released (v. 7) somehow magically makes the high quality setting (10 microns) EASY to use, nearly obviating the need for sanding... with the previous firmware, printing at this level would often result in failed prints..."

First video of 2013. Making a small boat sound with the VCS3

Published on Jan 8, 2013 RothHandle·1,462 videos

"A weird and slow day in the studio. Did some backups and tried to clean my desk for 2013..IN the meanwhile I messed a bit with Kinski Tonys VCS3 and made it sound like a small boat."

Hordijk Modular In Space

Published on Jan 8, 2013 CoursDog·8 videos

"Hordijk modular in space!

Sorry for the silly video effect."

Böhm Soundlab Multi Module

via Look what I can do! where you'll find the full post.

"About 300 or so were ever made, and at least half of them were destroyed when the warehouse of the german Böhm company burned down. Needless to say, this thing is quite rare, and modules are hard to come by.
Now, the synth comes in this somewhat flimsy hardshell suitcase, and this particular specimen had some unused space that begged to be filled in a meaningful way.

My friend asked me if I could help, and I said "Yes!" - I offered to make a module with an 8-step sequencer, a state variable VCF (LM137000 anyone?), a double CV Inverter and a double "gender bender" (to convert between banana jack and 6,3mm mono plugs); thus making the most out of the available space."

the magnetic bug by folktek _ in a melancholic mood

Published on Jan 8, 2013 pianoloft·170 videos

"the magnetic bug is an extraordinary and unique experimental synthesizer, handbuild by folktek ( http://folktek.com/ ). there is a pad sound added, played with roland gaia synth."

Folktek on eBay (RSS)