MATRIXSYNTH

Malekko Heavy Industry Richter Oscillator II

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.
Perfect Circuit Audio (RSS)

"The Malekko Richter series of modules offer the same great sound, ergonomics, musicality, and quality that made the Wiard 300 series legendary, at a fraction of the cost and size in Eurorack modular format.

The Malekko/Wiard Oscillator is a great-sounding, solid analog Oscillator/LFO with some serious tricks up its sleeve.

Fine and Coarse frequency controls are provided. Volt per octave and exponential (with attenuator) CV frequency inputs are provided. An output for each waveform is provided (Sine/Triangle/Square/Saw). A second series of outputs are provided for phase-modulated versions of the Triangle, Square, and Saw waveforms. The phase of the 2nd series of waveforms is determined by the Phase control, along with the Phase CV input (with attenuator).

Many great modulation effects can be produced by using the various outputs of this Oscillator in a patch. Pull out the large Fine/LFO control to enter low range, and your Oscillator becomes a phase-modulated LFO! Set the 2nd series of outputs to a 90 degree offset and use external inverters to achieve full quadrature output.

One of our favorite patches with this module is modulating another oscillator's frequency and sending the modulated oscillator's output back to the Oscillator's Phase Mod input. Phase-Mod-Synced FM!

The Triangle 2 wave tends to create extra harmonics at various phase offsets, but the Sine wave provided by the Malekko Wiard Oscillator is one of the purest of any analog Oscillator.

Note: Tri2 has added harmonics.

Features

Four Waveform Outputs: Triangle, Square, Saw and Sine
Additional Dual Outputs for Triangle, Square and Saw useful for Phase Modulation
1v/oct CV Input
Attenuated CV Input for Frequency
Pull on the large Knob "Fine" to go to LFO mode.
Phase Mod Input with knob and Phase Control Knob
Coarse Tune Knob"

Division 6 Multiplicity VI Phat (3HP) Eurorack Synthesizer Module

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.
Noisebug (RSS)

"NOTE: The "Phat" version is 3HP wide, so you can fill all the holes in your rack even if you have an odd number of HP.

The original 2HP / 3HP 2x6 buffered multiple!

Multiples are handy, but the more ways you split your signal the weaker it gets.

The Multiplicity VI is a buffered multiple; every single output jack regenerates your signal. Whether you are splitting audio or control voltages, there is no degradation.

Multiplicity's channels are cascaded, giving you flexibility in how many ways you split your signal. Plug a signal into input 1 and it will be available from all 6 outputs. Add a different signal into input 2 and it breaks the chain; signal 1 comes out 3 outputs and signal 2 is available at the remaining 3.

Multiplicity VI has Cascade In / Out jacks on the back so that several modules can be cascaded together without sacrificing front-panel connections. Connect several modules together and it's like having one giant spread-out buffered multiple module. You can also use it to provide a "default" signal that is available when you aren't using the Multiplicity for anything else.

All that flexibility is crammed into a skinny module which is available in either the original 2HP version or the new "Phat" 3HP version. Replace all those non-buffered multiples or fill up extra spaces in your rack with something handy.

Specifications:
â€¢Power supply: +/- 12 VDC (reverse-polarity protected!)
â€¢Power draw: 16ma / 16ma
â€¢Width: 2HP or 3HP
â€¢Depth: 1.77in / 45mm

Includes:
â€¢Multiplicity VI Module
â€¢Doepfer-style Power Cable
â€¢(2) M3 x 6mm Rack Screws w/ Nylon Washers"

ARP 2600 Original Blank Patch Sheets

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.
vintageworks-nl

CLICK FOR MORE »

Oberheim DMX Electronic Snare Voice Card with original box and manual

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Up for sale is a (1) rare and vintage Oberheim Voice Card for the DMX (Electronic Snare). It comes with its original box and manual. It's working perfectly, the box is in used condition (see photo's). Great item for collectors!.."

ASS'Y 720067. The colors and design elements Oberheim went with for the box are fascinating. The DMX period was all about black with blue pinstripes.

CLICK FOR MORE »

Grey Hillwood Multivox Basky II Synth Bass Pedals

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

This is the first time I've seen a Hillwood branded Basky II. The Multivox model was black. You can see some here.

Via the listing: "Hillwood Basky II model bs 4322 bass synth pedal with a filter sweep and octave built in. This unit is 100% functional and is in great shape, lived in a studio and hardly used, does have some scratches and dings the fake wood sticker stuff is peeling up in spots, nothing major. The brand is Hillwood, but I know for a fact that Multivox made these as well. Basically its like a lightweight, less expensive, little brother to the Moog Taurus pedals. the black button on the right controls the filter sweep, the rest of the knobs are labled properly..."

CLICK FOR MORE »