2013-03-22 Endless (short live demo Voyager, Octatrack and MD)

Published on Mar 22, 2013 REOvolt·22 videos

"This is just a short impression of the amaizng sound of the Voyager controlled by an Octatrack. it's a very simple pattern, but the sound of the mighty moog can suck you right in......"

Castle bounce (live recording using Elektrons and others)

Published on May 19, 2013

"Test drive of some new material. It's very basic, but all parts interact with each other and there is a nice atmosphere to it. Enjoy!

Albums: http://reovolt.bandcamp.com/
Youtube: http://www.youtube.com/user/REOvolt
Soundcloud: http://soundcloud.com/reovolt
Facebook: http://www.facebook.com/reovolt"

midiSequencer for iPad Arrives

iTunes: midiSequencer - anthony saunders

"The midiSequencer iPad app is a 16 step sequencer with analog style sliders and a very special button called Cycle for delaying changes. Equipped with step or note duration timing and special effects (e.g. ratcheting ornamentation).

The design of midiSequencer was focused on being able to make changes for any of the 16 steps during play, for example it is possible to link all controls to move them as a group, or use increment/decrement buttons for small changes.

Flexible routing allows network sessions and midi devices to be sources of midi input to the sequencer. Additionally, the sequencer can be setup as a virtual source or destination to allow dedicated midi messaging externally to & from other apps.

With extremely high & low playback clock speeds (1 to 1020 BPM) it can accomplish special effects on your external midi equipment not even available on hardware sequencers. As a SLAVE, it can utilise incoming midi clock to synchronise your DAW or hardware synthesiser.

With the ability for each step to decide which step follows, this sequencer is capable of playing sub-sequences outside of the normal forward/reverse patterns.

Up to two midi controllers can be setup for the sequencer and each step can provide a value for the controller. All 127 controller values are possible, but most useful for the mod wheel & aftertouch controls. The effectiveness of this depends upon the receiving midi equipment, but it is not constrained.

Recording midi data as steps is also possible and can record midi note, velocity, channel, and up to two controller values. Recording for each of these parameters can be disabled in the Options. Additionally, you can select to record from only one midi channel, allowing you to use one midi source (e.g. a keyboard) to record from.

Snapshots allows the current settings (with or without the transport controls) to be stored in up to 20 locations. The can be loaded or saved even when the sequencer is playing. In Cycle mode, this loading will occur at the cycle reset, allowing for creative changes during play.

Stuck for a sequence idea? Let Random setup a completely new set of controls for you to experiment with!

Notes a little plain? Add note ornamentations : mordents, appoggiatura, triplet or even a ratcheting style triple or quad repeat.

SPECIAL NOTES :
1) iOS 6 or greater only, so iPad 1 not currently supported.
2) This app makes no sound (although it can send/receive midi to coreMidi apps you have installed on your iPad).
3) To communicate with external midi equipment you will need a suitable iPad midi interface unless you use the Midi Network sessions over wifi."

CLICK FOR MORE »

Buchla 208r making soft love

Published on Jan 8, 2014 DrOctave1·277 videos

"Buchla modular playing around with some sounds and rhythms."

Korg Volca Keys Track Test 2

Published on Jan 8, 2014 acidbed·19 videos

"100% Korg Volca Keys : multisamples for Rhythm and overdubbed for sounds. No effects.
http://livingston-eliptik.bandcamp.com/ https://soundcloud.com/herdmusic"

Soaring Stream : KORG MS-20 mini + Volca keys

Published on Jan 8, 2014 karenevil·323 videos

"Experimental Improvisation for short movie.
Live recording, using KORG MS-20 mini, Volca keys, Vox DelayLab, Lexicon MX200, Behringer MX400 and Tapco MIX.100.
Recorded with ZOOM Q3HD and Q4.
Edited and encoded with Openshot on Debian wheezy."

TB-303 Clone＜BassBoy+[Juteon-Shonen]＞ 【重低音少年】 Sound Demo

Published on Jan 8, 2014 電子音屋ヨクシー·47 videos

"TB-303のクローンであるセルビア共和国製の音源ボードBassBoy+を
日本人のエンジニアによりオリジナルでガジェット化した「重低音少年」という製品の
サウンド・デモを私、電子音屋ヨクシーのオリジナル動画でお届けします。
小さいながらも、そのサウンドは分厚く、よりTB-303に近い音がします。
圧巻の暴れ具合をご堪能下さい。

※途中のDelayサウンドは本機の機能ではありません

The sound demonstration of the product called "重低音少年" which it was original,
and made sound source board BassBoy+ made in the Republic of Serbia which was
a clone of TB-303 a gadget by a Japanese engineer
I send it by me, an original movie of electric sound organizer YOΞ.
The sound is thick although being small, and I hear a sound nearer TB-303.
Of the best part act violently, and, please thoroughly enjoy condition.
※ The Delay sound on the way is not a function of this plane

音源ボード「BASSBOY+」についてはこちらのメーカーサイトをご覧下さい。
Look at this maker site about sound source board "BASSBOY+".
http://www.mikroe.com/add-on-boards/a...

「重低音少年」については販売店 Five Gのサイトでご覧下さい。
Look in a site of store Five G about "重低音少年".
http://www.fiveg.net/

デモ・トラック、Freeダウンロード⇒https://soundcloud.com/yo-17
電子音屋ヨクシーのブログ⇒http://yoshitb303.blogspot.jp/

Please listen to Demo Track⇒https://soundcloud.com/yo-17"

Creating Individual FX on the Ensoniq ASR-10

Published on Jan 8, 2014 TheDaydreamSound·92 videos

"A video describing how to add individual effects to each track on the Ensoinq ASR-10 & EPS 16+.

PLEASE BE ADVISED
The process described in this video is a handy way of storing your favorite effect settings with your saved samples. It is not possible to sequence effectively using this technique, as the effects engine will adopt the INSTRUMENT EFFECT for the current selected track making it the main effect for all active tracks in the ASR-10.

If you would like to have individual effects on each instrument in a sequence, you can use the alternative methods described in the latter part of this video. In addition to these alternatives, you can also use a global BANK EFFECT to assign variations of that global effect to the BUS OUPUTS of each instrument. Although using a global BANK EFFECT is limited to the parameters of the selected effect, it is still a useful way to add non-destructive diversity to your music.

To support my work visit: http://www.thedaydreamsound.com and pick up a copy of my albums, The Daydream Sound I & II.

Thanks for stopping by!

Peace,

TDS"

QS606+ND2

Published on Jan 8, 2014 lesingemonotone·116 videos

"a little demo of my new resurrected TR-606, now with Quicksilver 606 CPU brain. Also added a trig out port for the Nord Drum 2."

Presentación de Yamaha MOXF

Published on Jan 8, 2014 Hispasonic·161 videos

"Aquí tenéis la presentación en vídeo del Yamaha MOXF que tuvo lugar a finales de noviembre en los locales de BoXinBoX en Madrid. Moira Muñoz y Pedro Dobón hacen un extenso recorrido por las funcionalidades y sonidos del nuevo workstation, y responden más de una docena de preguntas que los hispasónicos pudieron hacer en vivo, desde el chat de Hispasonic TV."

Mungo Enterprises r0 Reverb Model

Published on Jan 8, 2014 MungoEnterprises·27 videos

"A short demonstration of the Mungo Enterprises r0 Reverb Model eurorack module exploring its wide ranged controls."