Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"This Doepfer Dark Time step sequencer is the perfect multi function sequencer for the modern studio. Adjust the notes of each step using the 2 x 8 rows of knobs (which can run in 8 step, 16 step, or 2 different 8 step patterns). Each step also includes switches to let you skip, stop, jump, or toggle each in your pattern.
The Dark Time features extensive inputs and outputs including MIDI, USB, and an analog interface that includes CV in, CV out, Sustain in/out, Clock in/out, Gate, and Reset for use with modular or semi-modular hardware."
Tuesday, April 08, 2014
PPG Wave 2.3 SN 0265
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
via the seller: "This particular model is an old Wave 2.2 with the latest Wave 2.3 software installed (V 8.3), effectively making it a fully functioning Wave 2.3 with 16 oscillators (two per voice), 12-bit resolution, dual modulation wheels, SSM 2044 VCFs and 8-part multimbrality. I'm led to believe this model was made between 1982 and 1984. I had it shipped over from Germany after a service just over two years ago, I used it for about a month and after that I stored it away as I had no time to study it properly. It is a complex synthesizer, with extremely interesting sounds and a unique character. It has a few scuffs due to its age but apart from that it is in perfect conditions..."
Update via Qwave in the comments: "The serial number is most likely not 265. All pictures and my PPG wave 2.3 with the past PPG firmware 8.3 show this number during booting. The serial number of the PPG waves is written on the back. I guess, all version 8.3 EEPROMs show this serial number."
via this auction
via the seller: "This particular model is an old Wave 2.2 with the latest Wave 2.3 software installed (V 8.3), effectively making it a fully functioning Wave 2.3 with 16 oscillators (two per voice), 12-bit resolution, dual modulation wheels, SSM 2044 VCFs and 8-part multimbrality. I'm led to believe this model was made between 1982 and 1984. I had it shipped over from Germany after a service just over two years ago, I used it for about a month and after that I stored it away as I had no time to study it properly. It is a complex synthesizer, with extremely interesting sounds and a unique character. It has a few scuffs due to its age but apart from that it is in perfect conditions..."
Update via Qwave in the comments: "The serial number is most likely not 265. All pictures and my PPG wave 2.3 with the past PPG firmware 8.3 show this number during booting. The serial number of the PPG waves is written on the back. I guess, all version 8.3 EEPROMs show this serial number."
SISMO QADROX
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The Sismo Qadrox is a squarewave generator with four analog oscillators built in eight step sequencer, input to external clock, CV and sync outputs.
The audio outputs have two options, one mono by the 3/4 inch (guitar plug) and RCA stereo, split the oscillators two per each side. Front panel have nine potenciometers, is the CV sequencer (0-5 Volts) controlling the sound generator.
The potenciometer in the middle is the sequencer pitch control.The lower panel have an external clock input and the clock output, internal or external and the CV sequencer output. The one switch change completely the sound generator, increment some sweeps, noises and lfos, charge and discharge capacitors. The another switch is a sequencer reset.
Features
- Create powerful noisy rhythms and unpredictable sounds
- Portable design in wood and acrilic
- Sync by Clock, lead or follow the pitch
- CV output
- Stereo oscillators output
Specifications
Polyphony: monophonic
Oscillators: Four fixed oscillators square/pulse
Control: CV in-out, Clock in-out
Power source: 12 Volts (center positive) (Not included)
IMPORTANT SAFETY CONSIDERATIONS!
- Do not exceed a 15VDC wall wart
- Make sure the wall wart has at least 300 to 1000mA capacity
Weight: 600g
Dimensions: 10,5cm(H) x 13cm(D) x 13cm(W)"
via this auction
"The Sismo Qadrox is a squarewave generator with four analog oscillators built in eight step sequencer, input to external clock, CV and sync outputs.
The audio outputs have two options, one mono by the 3/4 inch (guitar plug) and RCA stereo, split the oscillators two per each side. Front panel have nine potenciometers, is the CV sequencer (0-5 Volts) controlling the sound generator.
The potenciometer in the middle is the sequencer pitch control.The lower panel have an external clock input and the clock output, internal or external and the CV sequencer output. The one switch change completely the sound generator, increment some sweeps, noises and lfos, charge and discharge capacitors. The another switch is a sequencer reset.
Features
- Create powerful noisy rhythms and unpredictable sounds
- Portable design in wood and acrilic
- Sync by Clock, lead or follow the pitch
- CV output
- Stereo oscillators output
Specifications
Polyphony: monophonic
Oscillators: Four fixed oscillators square/pulse
Control: CV in-out, Clock in-out
Power source: 12 Volts (center positive) (Not included)
IMPORTANT SAFETY CONSIDERATIONS!
- Do not exceed a 15VDC wall wart
- Make sure the wall wart has at least 300 to 1000mA capacity
Weight: 600g
Dimensions: 10,5cm(H) x 13cm(D) x 13cm(W)"
A1 + 00
A1 + 00 from Peter Speer on Vimeo.
"Scanning through the Gamma Wave Source's 00 bank and the Morphing Terrarium's A1 bank (with interpolation disabled) to create shifting, consonant melodies.
www.diode-ring.com"
Roland AIRA TR 8 TB 3 Novation miniNova in Ice Camp Kitzsteinhorn KAPRUN
Published on Apr 8, 2014 E-MUZYK.pl·247 videos
"Damo Roland AIRA TR-8 i TB-3 oraz Novation miniNova nagrane na 2600 m n.p.m. w Iglo Ice Camp w Kitzsteinhorn :-) Test na http://E-MUZYK.pl"
iPad Music App Korg Gadget Miami
Published on Apr 8, 2014 Synth Universe·193 videos
iTunes: KORG Gadget - KORG INC.
"Miami is the 10th instrument inside Korg Gadget, a wobble synthesizer.
For info & review go here: http://synthuniverse.com/korg-gadget/"
All parts here.
Arturia BeatStep CV Sequencer in a modular setup [HQ Quality]
Published on Apr 8, 2014 inbetweenmovements·66 videos
"This is my first Test run ;) BeatStep is driving the Make Noise - DPO & Make Noise - Optomix. Added delay in Live, also controlled with BeatStep in Midi-Ctrl Mode."
Arturia Beatstep on eBay
BugBrand Modular vid #146
Published on Apr 8, 2014 Phisynth·121 videos
"I just reinstalled Ableton Live and made this test patch, controlling the BugBrand Modular through Expert Sleepers ES3&5"
Korg MS-20
Published on Apr 8, 2014 Analog Synthesizers·16 videos
"All sounds in this song is from the Korg ms20.
Multitrack recording with some reverb and delay added."
Befaco Modular Synth DIY Workshop Coming to London April 26 & 27 & Other Locations
Note: links to listings are affiliate links for which the site may be compensated.
via MATRIXSYNTH CLASSIFIEDS
"SDIY worshop on London next 26/27 of april at Musichackspace (Also other cities also available check Befaco.org)
No previous knowledge needed
You can build any of the next modules on eurorack format:
BF22 VCF 120
VC ADSR 110
Slope Generator 2 120
Instrument Interface 110
Output module 65
Mixer 50
Crush Delay 110
Hexa VCA 135
Power Bus + Power supply 73
Dual Atenuverter 50
Joysitck controller 100
VC Slew limiter 60
The workshop is included on the price of the kit you want to build. Kits include all the neccesary parts to finish your module
You can come also for free if you dont wnat to build any module and just want to meet some "euro-freaks"(write me first)
Check this video for more info about Befaco and his workshops
For booking please contact befacosynth//at//gmail.com
If you are interested in organize this workshop on your city just led as know and we will try
Asembled modules available on demand"
via MATRIXSYNTH CLASSIFIEDS
"SDIY worshop on London next 26/27 of april at Musichackspace (Also other cities also available check Befaco.org)
No previous knowledge needed
You can build any of the next modules on eurorack format:
BF22 VCF 120
VC ADSR 110
Slope Generator 2 120
Instrument Interface 110
Output module 65
Mixer 50
Crush Delay 110
Hexa VCA 135
Power Bus + Power supply 73
Dual Atenuverter 50
Joysitck controller 100
VC Slew limiter 60
The workshop is included on the price of the kit you want to build. Kits include all the neccesary parts to finish your module
You can come also for free if you dont wnat to build any module and just want to meet some "euro-freaks"(write me first)
Check this video for more info about Befaco and his workshops
For booking please contact befacosynth//at//gmail.com
If you are interested in organize this workshop on your city just led as know and we will try
Asembled modules available on demand"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH






























