KORG RADIAS-R Synthesizer/Vocoder Pro Studio Rack Sound Module

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

What's the plastic thing for?

AIRA Artist First Contact — DJ SKRIBBLE, TERRY HUNTER, DJ SPINNA, and KENNY DOPE

Published on May 11, 2014 RolandChannel·851 videos

Roland Aira's on eBay

AIRA Artist First Contact — TERRY HUNTER, DJ SPINNA, and KENNY DOPE

helmsman

Published on May 11, 2014 Ebotronix·1,030 videos

4ms Peg, QCD² / Expander², QPLFO, RCD²,VCA Matrix
Analogue Systems RS100²,RS110²²,RS 360²,RS500e²
Arp Odyssey white noise
Bananalogue Serge VCS
Cyndustries Zero Oscillator
Doepfer R2m, A114,A118, A134²²,A141, A143-2/9,A148,A149-1
A151²², A160/161/162, A175²²,A185-2'², A 138a²²b²²c²²²
Electrix Warp Factory Vocoder
Flame Chord Machine²,FX16,Talking Synth Module²
foh choices
Make Noise Brains,Pressure Points² ~ QCD time divisions
Maths²,moddemix²²,Optomix,QMMG,René, Wogglebug²
Malekko Anti ²² ,Uncle³,Jag
Moog Taurus 2,Freqbox ²²,MP201
Oberheim Sem
Roland SVC 350 Vocoder,System 104 Sequencer
Simmons clap trap
SSL Modulation Orgy
Tip Top Audio Z8000 manual voltage source
Toppobrillo,Quantimator²(aolian), Sportmodulator,TWF²
Logic masterclock to Kenton Pro 2000²,QCD²,Peg
FX :Alesis 3630,Boss VF1,BSS DPR 402,
Lexicon PCM 80, Line6 Echopro,
Red Federation BPM FX Pro, TC M3000
mackie the mixer³
morse key to A160/161for TSM² - Vocoder² switch

Wurlitzer Orbit III DIY Salvaged Synthesizer

Published on May 11, 2014 Derek Mann·9 videos

"I salvaged a Wurlitzer Orbit III synthesizer from a Wurlitzer organ. I repackaged the synth in a vintage reel to reel case."

MicroGranny 2 Demo #1

Published on May 11, 2014 d4nnyp·34 videos

"very quick and rough demo of the new MG2 from Bastl Instruments. I recorded a knee harp using the on board mic. MG2 is synced by an MFB drum machine part way through with a simple beat. some reverb and delay also used. Recording quality is quite lofi from the onboard mic, I didn't record it very well and the camera I used to record this is pretty noisy too, so maybe not he best demo but will give an idea. Sound from wav files on the SD card is spot on. This is a great box, Bastl have down a good job."

Wave-Folding with Wave-Shapers - Serge Synthesizer Tutorial

Published on May 11, 2014 Doug Lynner·22 videos

"Use several Wave-Shapers in series to accomplish Wave-Folding plus basic Wave-Shaper operation and advanced tips and tricks.

Though this is illustrated on a Serge the concepts apply to many modular synthesizers. Let me know how you apply this on your modular synthesizer.

To see the modules used in this patch in detail see the Mystery Serge at http://www.serge.synth.net/gallery/dl

Doug's website is http://www.neatnetnoise.com.

Interact with Doug:
http://www.youtube.com/channel/UC1LRX...
https://soundcloud.com/doug-4
https://www.facebook.com/doug.lynner"

Improvised Rather Chromatic Tune on Tempest & Prophet 12

Published on May 11, 2014 Phoenix-Flare·44 videos

"Another Sunday afternoon improvisation relaxing at the Fernforest Project."

TTSH/ ARP 2600 Clone

Published on May 11, 2014 Jason Baker·16 videos

"My completed ARP 2600 Synthesizer clone -- the Two Thousand Six Hundred Mini Meanie (TTSH). The instrument is playing a section of Beethoven's 9th symphony from a midi file controlled by an Expert Sleepers ES-3 module"

Travelling away (Doepfer analog modular synthesizer)

Published on May 11, 2014 GruithuisenCityMan·508 videos

"Travelling away (Doepfer analog modular synthesizer)

Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made using a Doepfer analog modular synthesizer.
Enjoy !"

dtronics NANO series

Published on May 11, 2014 Dtronicsmusic·6 videos

Dudes dancing with guitars.

"The Nano sync converts midi clock to sync pulses.
It has 2 Dinsync outputs that can individualy be set to 24 , 48 or 96 ppqn, and a jack sync output that can be used with arpeggiators or sequencers and it can be programmed from 24/127 ppqn up to 24ppqn.
It has low latency of less than 200 micro seconds.
A Led shows the current clock speed - 1/24 of clock frequency.
Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole

Average latency: less than 0.3ms

****************************************­*****
Nano Merge

Despite its small size and low price, it is an intelligent MIDI merger.
It has two MIDI IN ports and one MIDI OUT port. Both midi inputs are opto-isolated.
An indicator lamp lights when midi data is being received.
The Nano merger handles all MIDI message types, including System Exclusive and MIDI Time Code, and clock.
Channel Voice messages are normally transmitted in the order in which they were received.
Midi timing commands have higer priority.So if Note Data is received at channel 1, and a midi timing message comes in at channel 2, the timing message will be sent to the output as soon as possible, interrupting the note commands from channel 1, ensuring extreme low latency, and minor drift in midi timing.

Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole
Average latency: less than 0.3ms

****************************************­*****

Nano Thru

The Nano Thru is a 1-in 3-out MIDI Thru Box.
The Nano Thru provides additional MIDI Thru ports in a classic MIDI setup.
This way you will eliminate latency caused by daisy-chaining midi equipment.
All MIDI messages appearing at the In Port are sent unchanged to all three Thru ports.
The signal is cleaned by the hardware, by analyzing the data and completing lost data strings ensuring any signal scew is eliminated.
The Nano Thru is externally powered to ensure error free operation over long cables and has a low latency of max. 3 micro seconds.
A MIDI indicator LED flashes when MIDI data is received.

Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole
Average latency: less than 3us"