E-MU Emulator III Analog Sampler Synthesizer Keyboard

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Emu Emulator III model 6081 (w/rare factory 8MB upgrade!) running the latest/last Firmware v2.00 and Software v2.42. This Emulator III has been fully tested and is in excellent working condition. It has just gone through an extensive cleaning/ servicing/ recalibration/etc. Every part/component and connection has been cleaned of all dust/residue. Every LED, ribbon/molex cable was cleaned and reseated. All buttons, sliders, keys, and key contacts have been cleaned for optimal performance. The PSU has also been re-calibrated for a strong and reliable running machine. The 3.5" disk drive and HD also work flawlessly. Both wheel controllers are working as they should, and have also been cleaned/lubricated. The entire keyboard assembly was dismantled and completely cleaned so all keys respond beautifully. If you are familiar with the Emulator III, then you will understand and appreciate the value in this kind of work. The cosmetic condition of this EIII is also excellent, with only a few small scratch on the top of the shell (see photo) to mention. The Emu Systems Emulator III is the holy grail of 16-bit samplers, using 16 x CEM3387 analog filter chips (the same as Waldorf Wave/Microwave1), for the most beautiful of sounds!"

CLICK FOR MORE »

drmoonstien one toothed noise synth

Note: Auction links are affiliate links for which the site may be compensated.
Published on May 25, 2014 drmoonstien·314 videos

via this auction

" it has main vco can be toggled on for sustained sound or momentary press and release via the one key. this is a one toothed noise synth. the vco pitch is controlled by knob. there are 2 different lfos for modulation with on off toggle and type selection toggle. there is an 8 octave divider that can be controlled by touching the 8 body contacts to the big body contact or the first 4 octaves can be sustained by toggle. on the upper half of the synth there is a blast button this trigger an envelope this section has bypass toggle pitch knob controls how high the env goes env knob controls the attack the pitch toggle lets you manual sustain the frequency with the knob. very crazy noise machine."

ROLAND SH-09 Vintage Analog Synthesizer SN 044599 with Original Roland Case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Arp Solus Analog Vintage Synthesizer SN 2353493

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Arp Solus that works and sounds great. All of the sliders have been cleaned and work beautifully and original slider caps are in place. The key bushings were recently replaced, all keys trigger perfectly. It was just calibrated/tuned. There was a useful modification done at some point which allows for infinite positive pitch adjustment of VCO2 by using the mod slider and the tone stays where you set it instead of ramping up and down according to ADSR.The case is nice, and latches perfectly. This is fairly light so it can be carried around with ease."

CLICK FOR MORE »

Akai AX60 Vintage Analog Synthesizer 10425-21382

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Rare Vintage Kawai K5M Additive Synthesizer with Original Box & Instructions SN 147509

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Access Virus Ti2 Polar Virtual Analog Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Most amazing hardware VA synth thanks to its convenient VSTi / AU total integration and versatile synth engine."

CLICK FOR MORE »

Moog Source Synthesizer with Custom Black Data Wheel & Extras

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Includes bonus CD and cable to attach from laptop to Moog for file transfer...

Extra switch by left mod wheel is connected to the rear remote jack, seems like some on and off for this jack. Not connected to internal circuitry at all See pictures

BONUS EXTRAS
Users manual on cd
Schematics on CD
Moog Source rare factory wav file in CD
Factory Programming sheets"

CLICK FOR MORE »

Korg Polysix SN 464049

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

ACCELERATOR Update procedure MAC OSX

Published on May 26, 2014 Jörg Schaaf·26 videos

"This video shows in three steps:
1.) Starting the Accelerator in Bootloader mode
2.) Updating the boot loader
3.) Updating the firmware.

Not all updates involve a boot loader update. Just skip step 2 if no boot loader update is necessary. But please always do a boot loader update if your ACCs version is below the latest published version. The firmware has been tested with the latest boot loader version!

A windows version of this video is in preparation and will follow soon.
The update itself will get uploaded soon."