Experiment with modular synth pulse samples on E-MU E5000

Published on Oct 4, 2014 Phil Tipping

"Sweeping through pulse waveforms using E5000's realtime crossfade function, controlled by cc messages from a Drehbank MIDI controller driven by the CV output of a modular LFO.
Pulse samples captured and processed as per previous video http://youtu.be/Uhv1tN7FMTo" [here]

Algorytmid studio

Published on Oct 4, 2014 MrAlgorytmid

"Li....,"

Vegetable Dubstep at Croydon Fun Palace

Published on Oct 4, 2014 museumoftechno

Anyone remember the original Museum of Techno Series? If you haven't seen them be sure to check them out.

ROLAND SYSTEM 100 & ANALOG SEQUENCER

Published on Oct 4, 2014 Alexey Taber

ROLAND SYSTEM 100 & ANALOG SEQUENCER II

Play with Gakken Electric SteelDrum and KORG monotribe

Published on Oct 4, 2014 Masami Hashimoto

"Use, Gakken Electric SteelDrum, KORG monotribe.
学研のスチールドラムで遊ぶ。
やっぱりピックアップ付けるとどうしてもミュート気味に。
本当はもっときれいな音が鳴るんです。"

Pic via this auction.

First test with Mutable Instruments Braids

Published on Oct 4, 2014 Matthew Shaw

"First test with Mutable Instruments Braids. Patch description below.

Melody and Percussion:
Braids in "Meta" mode, waves are selected by Intellijel Metropolis set to "Brownian" which pseudo randomly selects waves. The sound is filtered by the Makenoise MMG, the MMG is modulated by a Doepfer A145 LFO set to a slow cycle rate. Main sequence Makenoise Pressure Points clocked by Intellijel Metropolis and modulated "Direction in" by a square wave form a Doepfer A145 LFO.

Kick and Snare:
Kick produced by Doepfer A127 Triple Voltage Controlled Filter and modulated by a Doepfer A140 ADSR. Snare made by a Doepfer A118 Noise Source, filtered by a Doepfer A121 Multi-Mode Filter and modulated by Doepfer A140 ADSR.

Clocks:
Main clock Intellijel Metropolis, this is sent to a Doepfer A160 Clock Divider which is then sent to a Doepfer A149-1 Quantized / Stored Random Voltage which intern triggers the Doepfer A-149-2 Digital Random Voltage, these clocks are then sent to the Intellijel Plog logic module to produce the kick and snare rhythm.

Delay:
Main delay comes from the Modcan Dual Delay percussion delay produced by Synthrotek EKO, the EKO's rate is modulated by a Doepfer the A118 Random Voltage and is attenuated by a Doepfer A129/3 Vocoder Slew-Limiter."

en-TRANCE (live techno jam)

Published on Oct 4, 2014 alternatingbitmusic

"Throwing down with an old school techno jam.
Main synths used: DSI Mono Evolver, Korg MS2000R, Arturia MiniBrute, Korg EMX-1"

Toppobrillo Multifilter filter modes test

Published on Oct 3, 2014 bigcitymusic

"A sampled Cwejman S1 riff & DSI Tempest drum line was routed to the input of the Toppobrillo Multifilter to check out the Low, Band, Hi and Notch filter modes."

Modified Realistic Moog MG-1 Synthesizer Demo

Published on Oct 3, 2014 sizzlemeister

"I modified this MG-1 a few years ago. Don't ask for schematics or anything, as I don't think I kept my notes. These are basic modifications, anyway, for anyone who knows what they're doing.


Here is the list of modifications, and/or updates/work done:

LFO - added Medium, Fast, (S)Low speed selection switch

Osc 1 - added Pulse Width knob, plus Pulse Width routing switch (manual, LFO)

Osc 2 - added Pulse Width knob. Added Detune Routing switch (LFO, Envelope, off or manual). If memory serves, Osc 2 was also lowered an octave.

Filter - added Feedback knob, plus a switch to turn Feedback on or off.

A Power LED was added.

Keybed - each key removed and hand-cleaned. The keybed was adjusted to be quicker and more responsive.

CV inputs - modded to accept standard 1v / octave analog control.

New audio output IC (I forget what I put in there, but it's new and better than the stock one).

Standard 1/4 inch output jack replaces stock RCA output jacks.

Lower PCB inside reinforced to be more structurally stable.

Complete power supply overhaul.

Electrolytic capacitors replaced.

Various switches and sliders replaced with new ones as necessary.

Fully tuned and calibrated.

All foam removed and foam damaged components cleaned and, if necessary, replaced.

All plastic and metal hand-cleaned of gunk, nasties, and yuckies (I'm a germaphobe)."

Korg Poly 800 with Moog Slayer and other filter mods plus a built in BSIAB II

Uploaded on Jun 29, 2011 sizzlemeister

"Korg Poly 800 with Moog Slayer mod, Filter Frequency Modulation mod, 12/24 db Filter switching, and a BSIAB II grafted into the former chorus circuit. I picked up this Poly 800 at a yard sale and it was in very bad shape, so I gave it bath and fixed it up. It needed the power section rebuilt and some other work, plus the joystick knob was missing so I replaced that. I added an internal battery for the memory."