Stepper Acid x0x Jam

Published on Feb 20, 2015 Transistor Sounds Labs

"Here's Nina having a quick jam on some Stepper Acids, x0x-heart, M303, Frequency Central Meth Amp and Tiptop drum modules."

Roland SH-1 & Eventide Space

Published on Feb 20, 2015 DreamsOfWires

"Someone here recently asked me which of my synths was my favourite - I'd probably say the Roland SH-1, followed by the Micromoog perhaps. This is a re-recording of something I uploaded 3 years ago, and I initially posted this on my other channel 'tomorrowthecure', but since so few find that channel I thought I'd upload it here too. The outdoor footage is from the highlands of Scotland, the camera was old, and youtube compression has made it look even worse, but the the sounds and images are connected in my mind, so there it is."

Korg Volca Bass Osc Volume Mod Hack - How to full instructions!

Published on Feb 20, 2015 Darren Glen

Demo video for this mod here.

"NOTE:DO THIS AT YOUR OWN RISK! I WILL NOT BE HELD RESPONSIBLE FOR YOUR OWN DAMAGE TO YOUR UNIT.

Here you will find full instructions on how to mod your Korg Volca Bass to add separate level control for each of the 3 oscillators as well as a variable drive/distortion control!"

Korg Volcas on eBay

New ADDAC702 Dual Voltage Controlled Filter

Published on Feb 20, 2015 ADDAC System

"Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:
.Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.
.Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.
.Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.
.Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.
.Switch for setting filters Filters in Parallel, independent, or Series: HP into LP.
.Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.
.Three position switch selects different resonance clipping paths: diodes / no clipping / leds.
.Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.
.All audio outputs HP, Mix and LP feature a switch for choosing phase output, allowing additive or subtractive mixes.
.Three Leds monitor the amplitude of the three outputs: HP, Mix, LP."

patch autogénératif 1,02

Published on Feb 20, 2015 DavidH

http://malekkoheavyindustry.com/

DSI Pro2 Custom Patches

Published on Feb 20, 2015 Elpiulas

Dave Smith Pro 2s on eBay

KOMA Elektronik Komplex Sequencer: MC-202 Jam

Published on Feb 20, 2015 KOMA Elektronik

"Here, we are controlling a Roland MC-202 with the Komplex Sequencer. The MC-202 runs through a KOMA ELEKTRONIK BD-101 pedal. The Komplex Sequencer also clocks the Korg Volca Beats. Sequencer A of the Komplex Sequencer controls the CV/Gate of the MC-202, and Sequencer C CVs the Delay Time of the BD-101. The clocks of all sequencers are patched together. In the second half of the video, Sequencer B CVs the Sequencer Start Point of Sequencer A, while Sequencer D CVs the Transpose function of Sequencer A. The Sequence Length, Play Mode and Division are changed by hand to further complicate the pattern playing. Feel it!"

Synth Tech - Quad VCA Design

Published on Feb 20, 2015 shiftedphase

"In this video the Dintree D100 Quad VCA circuit which uses the SSM2164 VCA chip. You can download the schematic from: www.dintree.com"

Tiptop Audio Systems - patch 8

Published on Feb 19, 2015 Tiptop .Audio

"Two systems, actually one and a half, the second system is only half full. Two Z-DSPs and few Z3000 and the beautiful Halls of Valhalla. One DragonFly delay is VC over time from the Z8000, All sounds are played from the Circadian Rhythms, and one MIXZ mixes everything before hitting the z-DSPs. Coming out of the systems with two stereo pairs from the Z-DSPs and one mono from the BD909. There are two Z2040, one for each of the sounds played, and modulated at audio rate by a Z3000. At the center of the black system are two Quantizer prototypes that I’m using in Keyboard mode."

Doepfer A106-5 12 db SEM filter Audio Demo Part Two-Notch/High Pass

Published on Feb 19, 2015 Raul's World of Synths

"Continuing the Doepfer A106-5 video series. This time we hear an example of a few sounds that can be created using a melody line filtered with the A106-5 SEM filter. Specifically we will explore the Notch and High Pass Filter. Sound and Video by Raul Pena"