'POLYMATHS' Make Noise B&G Shared System

Published on Jul 13, 2017 Caspar Hesselager

"Patch notes:
The general idea of the patch is to explore Maths as a dual oscillator by modulating very fast audio-rate cycles of channels 1 and 2. Two sets of offset voltages go from Pressure Points to the cv inputs of Maths ('both') to change notes. A third set of voltages goes to the Varispeed input of the Phonogene, effectively creating a third voice. The DPO oscillators A and B are also in the mix independently. Osc. B receives quantized cv from René, and osc. A receives the independent unquantized cv (tuned by ear). Tuning the Maths properly here can be be an issue, since very small incremental changes to the knob positions have a big effect! A second (and third) quantizer would've come in handy, but where's the challenge in that?
DPO is linear(ly) FM'ed by the Smooth VCO from the Wogglebug. WB also acts as an envelope generator to open the Optomix channels, since Maths is busy oscillating :)
Hope you enjoy!

No editing or post-processing.
Audio-only version:
https://soundcloud.com/caspar-hessela..."

DSI Prophet REV 2 - Custom Patches 101 to 128 - GEOSynths.com

Published on Jul 13, 2017 GEOSynths

"Buy Now - http://www.geosynths.com/prophetrev2

The final Episode and the final 28 Patches i've created for the Prophet REV 2. It's been great making these patches and hearing how different the REV 2 can be from the Prophet 08, yet still has its heritage.

Has been lots of fun and probably worked harder on these patches than any others...It's deep!"

Click here for all parts in this series.

Meris with L.A. Electronic Artist BASECK using Ottobit Jr. and Mercury7

Published on Jul 12, 2017 Meris

"L.A. Electronic Artist BASECK performs with Meris pedals (Ottobit Jr. and Mercury7). He gives his very first impressions of the pedals while playing an exclusive track live thru a DSI Sequential Tempest and Roland TB303.

Official Meris Site: http://www.meris.us"

Bladerunner Inspired Live Session: LA Session Artist Bryan Velasco using Mercury7 Pedal

Published on Jul 13, 2017 Meris

"L.A. Session Artist/Keyboardist Bryan Velasco performs with the Meris Mercury7 Reverb Pedal. Bryan improvises live while channeling a Bladerunner inspired mood using a Mercury7 Reverb, Moog Voyager + Yamaha S90.

Official Meris Site: http://www.meris.us"

Bluejay

"A relaxing piece from the Buchla Easel with 208 toolbox and an Eventide H9 Resonator (Scary chord preset). This is a self playing patch, the only interaction was changing the Easel's pulser timing slider. Random pitch, Random Timbre, and Random Toolbox flips on CA and MO waveshape."

Makaton live at Brighton Modular Meet 2017

Published on Jul 13, 2017 Brighton Modular Meet

"Makaton performing live as part of the 2017 Brighton Modular Meet at the Attenborough Centre for the Creative Arts, University of Sussex, Brighton.

Sponsored by Thonk, Makenoise, Rubadub, Ableton, AJH Synths, ALM Busy Circuits, Arturia, Erica Synths and Expert Sleepers."

Hypersynth Xenophone in White & OS Updates

via Hypersynth

"Firmware v2.1 Additions & Fixes:

-Optimized system performance.
-Added option to copy and paste a sequence from one preset to another.
-Added "De-zipper" to remove zipper noise of filter freq knob and modulation wheel.
-Removed: [Freq Enc Ratio] in global menu.
-Now semitone knob changes the oscillator pitch smoothly without any stepping.
-Now the OLED display makes less jumps while two knobs are tweaked at the same time.
-Now "Arp latch" can be set in Arp menu using soft knob [E4].
-Increased preciseness of the numbers that are displayed for LFO rates and ENV parameters.
-Fixed Arp pattern reset issue while changing oscillator's transpose and cent.
-Fixed compare button issue that sent out unwanted MIDI messages.
-Fixed FM level issue that displayed wrong value on the screen after being modulated.
-Fixed soft knob [E2] problem that did not transmit after touch message when "Panel TX MIDI= ON".
-Fixed bug that caused knobs send out of range MIDI messages when "Panel TX MIDI= ON".
-Fixed problem in receiving "bank select" followed by "program change" message via MIDI.
-Minor improvements in updating parameters via MIDI.
-Renamed: SEQ-T1/2/3/4 to "SQ-NOTE", "SQ-VEL ", "SQ-AUX1", "SQ-AUX2" in Mod Matrix source list.
Firmware v2.0 Additions & Fixes:
- Added Duophonic mode.
- Now all parameters with dedicated controls (knob/button) respond to soft knobs.
- Now you can fine-tune Filter Frequecny, Env depth and LFO rates using soft knobs.
- Now for all buttons, first click displays parameter's edit-page without changing the value.
- Now LFO rate LEDs fade up/down according to LFO wave.
- Redesigned envelope display format.
- Now envelope page 2 and 3 are merged to show Delay/Hold/Style/Trigger in one page.
- Now SEQ edit-pages memorize the last edit position.
- Now you can navigate to all Arp/Seq edit-pages using [select] button.
- Now external clock does not trigger notes when Arp/Seq set to off.
- Now [preview] buttons do not trigger Amp envelope when "arp span=off" (Start/Stop mode).
- Now OSC3 does not respond to pitch wheel data when keytrk=off.
- Minor improvements in captions and text location on the screen.
- Fixed OSC3 random pitch change when keytrk=off.
- Fixed CV-Out reversed order in global menu (V-Trig/S-Trig).
- Fixed Amp Envelope malfunction in RC style with long attack and release (Trig=Analog1/2).
- Fixed issue in starting point of Amp Envelope release stage.
- Fixed Amp Envelope style problem that could be set to an out of range value after "EXP".
- Fixed Arp pattern reset issue while changing detune and drift parameters.
- Fixed portamento time problem that was not changed during gate-on time.
- Fixed "LFO3 Target" that was displayed wrongly as "LFO2".
- Fixed issue with "Filter Env Depth" and "LFO1/3 Depth" that could not be set to zero in some circumstances.
- Fixed soft knob E4 malfunction in last page of main section.
- Fixed rare bug that caused soft knobs to be temporarily disabled after updating ENV parameters via MIDI.
- Fixed bug in "UI-Fixed Mode" that caused unwanted jump to OSC3 edit page."

Gecho + Fidget Spinners = Fun! :)

Published on Jul 13, 2017 Gecho Loopsynth

"The demonstration of high-pass filtering (as opposed to previously shown low-pass). Because this mode does not attenuate higher frequencies, faintest noises, scratches and taps can be heard perfectly.

More information at http://gechologic.com/"

New nonlinearcircuits Primal Hyperchaos Module

Published on Jul 13, 2017 cirtcele

"Hyperchaos module - can be built to run at a variety of rates. The versions in this vid use 1uF capacitors and then from approx 2:25 slow right down with 10uF"

Digitakt Techno Jam

Published on Jul 13, 2017 wouter van dam

"Since I found out how to mix songs inside digitakt/ rytm.... I can make live sets with only one device....

here I boost my digitakt with the heat

just some techno loops, jamming and recording"