John Carpenter Prophet 6 patches by Everett Dudgeon, Prophet-5 Comparison & Tips

Published on Jun 8, 2018 EverettDudgeon138

Playlist:
John Carpenter Prophet 6 patches by Everett Dudgeon Part 1
John Carpenter Prophet 6 patches Vol 2 by Everett Dudgeon
John Carpenter Prophet 6 patches Vol 3 by Everett Dudgeon

Stop turning up your Prophet 6 by Everett Dudgeon

Published on Aug 17, 2018 EverettDudgeon138

"Some criticism the Prophet 6 and OB6 received is they sounded too harsh. As it turns out a lot of people are unknowingly driving the filter way too hard. I learned about it through some feedback with my John Carpenter patches. By default when the VCO's volume is maxed out in the mixer section and the Amp Envelope's amount is maxed out it's automatically driving the filter hard. Backing them off to 50% gets you a warmer and smoother sound, closer to the original Prophet-5 territory."

The original 48 Prophet 5 Patches In The Prophet 6 by Everett Dudgeon

Published on Aug 21, 2018 EverettDudgeon138

"Going through the original Prophet-5 presets that were re-created by John Bowen for the Dave Smith Instruments Sequential Prophet-6.

I go through all 48 (I thought it was only 40 my mistake) and I recognize them from various soundtracks and songs.

These are located in bank 400 and start at 411.

Marcus V Warner's channel
https://www.youtube.com/user/Official..."

Korg Z1 Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"The Korg Z1 is essentially an expanded, polyphonic take on the hit Korg Prophecy. It features 12-voice polyphony, 13 waveforms, four LFOs, two resonant filters, two effects units, and a full featured polyphonic arpeggiator with room for 15 user patterns."

CLICK FOR MORE »

Inter-app CV Control... iVCS3 Filter Controlled by Model15 CV via AUDIO Connection

Published on Aug 21, 2018 James Edward Cosby

"Hi, this takes my Audio CV idea a step further into Realtime Audio Voltage Control. The #MoogModel15 is patched to output it's LFO directly to the 15's Audio Bus, this bus audio is routed via #APEMatrix directly into #iVCS3 's Audio Input Lines. iVCS3 is patched to run a sequence using Osc1 & 2 via iVCS3's Filter, the CV Audio arriving in iVCS3's Input 2 is then patched to modulate iVCS3's Filter Frequency!... Have fun!"

Dr. Dave Luce's Second Polymoog Restoration (by Synthpro)

Second video added here.

Buchla 200 @ Ems Stockholm. Line sound, no talking.

Published on Aug 21, 2018 Servando Barreiro

"My second day experiments with the wonderful Buchla system @ Ems Stockholm."

Best Ambient Synth Shootout #53: preenFM2 - Song 1

Published on Aug 21, 2018 Christian's Sonic Spaces

"This is the first song with the preenFM2. It's a 14 voice 4-part multitimbral polyphonic DIY FM generator with 28 FM algorithms from 3 to 6 operators, 7 default and 6 user waveforms, filter, arpeggiator, etc.

I used for the recording the following FX chain:
preenFM2 - Pigtronix Echolution 2 Deluxe - GFI System Specular Reverb 2. Depending on the recorded track some FX are deactivated

The signal went through a small Behringer mixer into the pc for recording. To create the complete song I recorded consecutively several stereo tracks. The final song was then mastered with a bit EQ and compression on some tracks and some limiting on the master track."

Modular + Pedals #18: Red Panda Tensor - Mutable Instruments Rings

Published on Aug 21, 2018 Modular + Pedals

"Generative ambient patch. Patch notes below.

Patch notes:

Squarp Instruments Hermod is sequencing and strumming Rings. The sequence is a product of the interaction of the Random, Chance, Swing, Ratchet and Scale effects and a few cleverly placed notes in the step sequence.

Mutable Instruments Rings is in sympathetic strings mode with 4 note polyphony. Brightness is modulated by a a sequence + random lfo on track 3 of the Hermod. Frequency is modulated by a heavily attenuated lfo from Peaks. Damping is modulated by the S&H on Kinks which is triggered by a gate sequence on track 2 of the Hermod. Position is modulated by a sequence on track 2 of the Hermod. Output goes to the ALM Busy Circuits S.B.G and into the Red Panda Tensor.

The Red Panda Tensor is the NXT mode, full loop length, pitch at + 2 oct, random at 50%, direction: ALT.

The output of the ALM Busy Circuits S.B.G goes to the Mutable Instruments Ripples which is filtering out a lot of highs. And from there to Clouds.

Mutable Instruments Clouds is running Parasites in the Oliverb mode at 16kHz/8-bit: µ-law."

Jean Michel Jarre - Oxygene IV with an ARP 2500

Published on Oct 17, 2015 Oxygene 80

Titre : Oxygène Part IV
Interprète : Jean Michel Jarre
Année : 1976
Auteurs compositeurs : Jean Michel Jarre
Durée : 3 m 30 s
Label : Disques Dreyfus

The PPG Wave 2 0 - some info and sound

Published on Aug 21, 2018 Default Corporation

"some sound and info about the Ppg Wave 2.0. This is the first version of PPG Wave, followed by the 2.2 and 2.3. Hope you like it. Thank's for watching!"

The BEST Eurorack Tape Delay module?

Published on Aug 21, 2018 Noir Et Blanc Vie

"Hey guys, let’s check out the newest offering from Strymon. The module was a pleasure to use over the last few months. Strymon definitely knows their way around an effects unit, I really enjoyed the looping portion of the module just for fun jamming. It’s also basically control per function in a small amount of HP which is impressive design wise. Overall I think the Magneto is not just the best X-man, but the best delay module haha"