Cigar Box Guitar + Modular Synth: Part II (TX Wiggles 50)

Published on Nov 3, 2019 poorness studios

"I woke up this morning with this cigar box guitar riff in my head so I decided to build a piece around it. The audio comes straight out of the modular synth with no additional processing.

You can find Part I here:"

Cigar Box Guitar + Modular Synth: Part I (TX Wiggles 35)

Published on Sep 22, 2018 poorness studios

"This was kinda fun. I decided to plug my CBG into the modular synth. It goes thru a homemade fuzz pedal, into the Pittsburgh InOut, then thru a Harvestman Polivoks VCF, and finally into MI Clouds. It doesn't really sound like a CBG after all that... but the twang still comes thru.

Fuzz pedal build: https://www.youtube.com/watch?v=V7DC3..."

Ambient Music - Klangbau Köln Eurorack vs. Linnstrument MPE Synths #TTNM

Published on Nov 3, 2019 THE TUESDAY NIGHT MACHINES

"Sometimes I just want to make weird bloops :D MORE INFO BELOW.

♥ SUPPORT: http://bit.ly/ttnm-support ♥

Created a chaotic ping and drone patch on the Klangbau Köln Eurorack modular Synthesizer and played on top of the noises with my Linnstrument three times. The MPE controller expressed my finger acrobatics through the Roli Seaboard 5D and ThumbJam iPhone Apps. Blooopz!

Questions or comments? Go ahead and post them below! :) Thanks for watching! Check out my channel for more Synthesizer Music.

THE TUESDAY NIGHT MACHINES on Social Media:
➤ Instagram: http://bit.ly/ttnm-instagram
➤ Bandcamp: http://bit.ly/ttnm-bandcamp
➤ Twitter: http://bit.ly/ttnm-twitter"

Gem RP-X Sound Module SN 020E070050

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"The half rack piano module from GEM known for its Fazioli patch.

Scratches on the bottom and cosmetic wear. Works perfectly.

- GEM RPX
- Sustain peddal
- Power Adapter
- Midi Cable
- USB thumb drive with manual and editor software"

You can hear one here.

CLICK FOR MORE »

Vintage CRUMAR LEM synthesizer 1984-1986

Published on Nov 3, 2019 Davide Micheli

"A short music track produced by means of vintage Italian syntesizers: a 'bit 99' and two 'bit 01' rack expander connette via midi to a MMK weighted midi master keyboard LEM.
The other instruments are not played."

DIY analogue synth project (Dual Thankensteiner VCF mode test)

Published on Nov 3, 2019 Adamski A.

"Here again is my take on the Steiner parker VCF for my Ad-vantage 03 synthesizer system. In
this video I showcase a few different mode combinations, as the synth uses 2 x Thankensteiner VCFs linked in series. Each sports LP, BP, HP and Notch mode."

Amstrad CPC Speak&SID - First Demo of SID Player

Published on Nov 2, 2019 Michael Wessel

"First demo of Speak&SID with the DaDMaN's version of Simon Owen's SID Player. Thanks to DaDMaN from the CPC Wiki Forum for sharing his branch of this player with me, which he had already customized for the CPC! Indeed, it was very little effort to get it running with Speak&SID. I only needed to change the output port and a couple other bits. And worked out of the box, to my surprise! And now - enjoy RoboCup and Commando on the authentic SID 6581.

In case you should be wondering why the sound volume goes low and sounds tinny for a couple of seconds at some point in the video - Speak&SID also feeds into the CPC's internal audio speaker, so at that point I am turning off the amp and let the CPC speaker roar for a bit."

Some additional info in via Mechael Wessel:

"I am cooking up a SID soundcard for the Amstrad CPC

Maybe of some interest to SID / CPC lovers?

'CPC Speak&SID' is a SpeakJet-based speech synthesizer for the CPC, and a SID sound card! It works with the original SID chips, but SwinSID and ARMSID are also valid options. The video shows the original 6581 in action.

The sources for CPC Speak&SID will be made open source soon. The production costs for the card are in the 50 $ range (without the SID chip of course - builders have to source one themselves) Speak&SSID uses the SpeakChip chip for the speech synthesizer, an ATMega 8535 at 16 MHz as the microcontroller, and a Xilinx 9536 CPLD. The SID chip is connected directly to the CPC address and databus though; the CPLD generates the 1 MHz clock signal from the CPC's 4 MHz clock, as well as the other control signals such as R/~W etc.

Unlike the Commodore, the CPC uses IO ports instead of memory mapped registers for hardware interfacing. Hence, the 29 SID chip registers starting at address &d400 to &d41c in the C64 memory are mapped to the CPC's Z80 IO ports &fac0 - &fadc. C64 SID BASIC programs can be ported easily to Speak&SID, simply by replacing the POKE's (PEEK) with OUT (INP) commands, and by adjusting the SID base address.

For the SID Player shown in the video, I am using a version that was already customized by DaDMaN from the CPC Wiki Forum, and it is based on Simon Owen's SID Player for the Z80."

VERMONA meloDICER first look & demo @ SOUNDMIT

Published on Nov 3, 2019 BoBeats

"I found this new sequencer from Vermona and its fun and intuitive. Here is a first look and demo.

Check out Vermona: http://www.vermona.com
Check out Soundmit: http://www.soundmit.com

Support my videos here: http://www.patreon.com/bobeats

#eurorack #soundmit #vermona"

More meloDICER here.

HARDWARE CONTROLLER FOR VCV RACK!! 🤯 Checking out MidiLar @ Soundmit

Published on Nov 3, 2019 BoBeats

"This is MidiLar and it turns VCVRACK into eurorack... Almost...

Check out MidiLar here: https://midilar-controller.webnode.sk/
Check out Soundmid here: http://www.soundmit.com
Support my videos here: http://www.patreon.com/bobeatsmusic

#VCVRACK #MODULAR #EURORACK"

Lagrange Synthesizer | iceGear's BEST Synth App? - haQ attaQ

Published on Nov 3, 2019 Jakob Haq

"iceGear's latest synth app Lagrange might be the best one so far. At least in my opinion. It's got a multi-engine algorithm Oscillators, seven different filter modes, a noise section with a vide range of interesting noise types including its own AD envelope. Lagrange has a lot going on and I absolutely love it! Check this out!"

Gecho v2 and Ellitone Multi Synth

Published on Nov 3, 2019 Gecho Loopsynth

"This must be the best sixty bucks I've ever spent :) So much fun!
https://www.etsy.com/shop/EllitoneSyn...
The channel #24 is new, it's a looper / warper without additional effects, as suggested by Gecho owners. Just finished it yesterday (2nd November) so it is not yet present in your firmware, it will be in the next update and demoed in a separate video."

See the Ellitone label for more.