Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This synth takes a little to understand its capabilities, but it can scream some tone that I've yet to hear from anything else. It has a through so you can plug your guitar, drum machine or whatever and let the fun start."
Friday, March 18, 2022
Bugbrand 2Frame SynthVoice
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Here is a beautiful banana Frac format system from Bugbrand. Contains the following modules: Top row: 2x Compact VCO, Quadrature Sine, Multiplier, Low Pass Gate, Dual Filter, Dual Amp, Dual Mixing. Bottom Row: Dual Envelope, Dual Divide, Dual Digital Shift Register, Penrose Quantizer, PT Delay, Joystick/Touch. Offers incredible sound with a huge range of cv, creative clocking and audio processing. Also included is a heavy duty waterproof/dustproof Nanuk case ($180 value), power supply w/ kettle plug cable, and a handful of Bugbrand banana cables."
via this auction
"Here is a beautiful banana Frac format system from Bugbrand. Contains the following modules: Top row: 2x Compact VCO, Quadrature Sine, Multiplier, Low Pass Gate, Dual Filter, Dual Amp, Dual Mixing. Bottom Row: Dual Envelope, Dual Divide, Dual Digital Shift Register, Penrose Quantizer, PT Delay, Joystick/Touch. Offers incredible sound with a huge range of cv, creative clocking and audio processing. Also included is a heavy duty waterproof/dustproof Nanuk case ($180 value), power supply w/ kettle plug cable, and a handful of Bugbrand banana cables."
Roland SH-101
Yamaha CS-01 SN 5393 w/ Original Box
Majella Implexus : A Fusion of East and West Coast Synthesizer Voices?!
video upload by Perfect Circuit
"Implexus takes some of the most compelling sonic aspects of Buchla and Moog's respective styles of synthesis, pairing them in uncommon ways to present a fresh take on otherwise classic sounds!
Check out our deep dive on the Implexus https://bit.ly/3KZ9giD
#buchla #moog #synthesis #modularsynthesizer #eurorack #analog #westcoast #eastcoast"
Meng Qi DPLPG
video upload by NOISEBUG
"Using the Meng Qi DPLPG to create all the percussion based tones in this patch.
The DPLPG is a dual 1-pole vactrol based LPG / VCA module that only takes 2 HP space, and requires no power supply.
https://www.noisebug.net/products/men..."
RF Modular self patch using the new Audio & CV Mixer module
video upload by Radical Frequencies Modular
"In this video I'm using my new module the Audio & CV Mixer!
Actually I use 2 mixers one for mixing 4 different waveforms from the oscillators and another for mixing different control voltages and then modulating the filter and vcos .
The dpvco and admultivco are the main oscillators and the cv modulations that are mixed for making more complex modulations are : lucky voltages, 2 looping vc envelopes and scota vcf that is used as modulation source like a dual cross mod lfo. The sound after the mixer goes to 12db multi Vcf in bandpass mode and then to vca."
New IO Instruments KALYKE DUAL FUNCTION GENERATOR Eurorack Module
via IO Instruments
KALYKE
DUAL FUNCTION GENERATOR
LFO section
Waveform:
controlled/morphed manually via potentiometer or CV. Morphs from Pulse (20-50-90%) -> Sinus (720°) -> Ramp (720°) -> Triangle (680°)
Tempo:
controlled via potentiometer or CV. Center of potentiometer at: 4Hz +/- 8 Oktaves
Repeats:
controlled via potentiometer and reset in. Can be adjusted from 1-14 repeats and endless loop (takes effect after reset in)
ADSR-Mix:
ADSR can be mixed onto LFO with potentiometer
Sample and Hold:
LFO can be switched into S&H mode
Offset:
can be toggled btw -5V to +5V and 0 to +10V via switch
Input:
1xCV for waveform, 1xCV for tempo, 1xReset
Output:
LFO has one positive and one negative CV output
Manual Trigger:
one button to reset LFO (shared with ADSR)
ADSR section
Curve:
continous exponentiell to linear response, controlled via potentiometer
Ratchets:
16 different multi repeats of attacks, controlled via Attack and Decay sliders
Loop:
loop mode from Attack to Release, controlled via switch
Freeze:
all settings get freezes to keep exact positions
Control:
4x30mm faders to control A, D, S and R segments
Manual Trigger:
one button to reset ADSR (shared with LFO)
Output:
ADSR has one positive and one negative CV output, further one trigger out at endof attack, one trigger out at end of decay
Input:
1xGate in (>1V), four modulation inputs to control A, D, S, and R segments (0-5V)
General:
Output Amplitude: 7,5V (ADSR) / 10VPP (LFO)
Frequency Range: LFO 60s – 284Hz /
ADSR 0,4ms-10s (Attack); 0,8ms-20s (Decay/Release)
Trigger out: 2ms/10V
Width: 16 HP
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH