"SOLAR 50 consists of 10 voices, each voice has its own volume. All voices are divided into groups of 5 units for the right side and for the left side and mixed by the MAIN MIXER where the Knob 01-05 sets the volume of 5 left voices and the knob 06-10 sets the volume of 5 right voices. Also, there are external audio input and volume PIEZZO knobs on the MAIN MIXER. All audio signals go to a 12 dB analog filter from POLYVOX synthesizer, which is controlled by voltage. From the filter, audio signals enter the effector (with cartridges) which is controlled by CV as well - the same circuit is used in ELTA music CONSOLE pedal. Here, the BLEND knob sets the effect level. The VOLUME knob sets the overall volume WET OUT. To process a pure voice signal by external effects, there are DRY OUT L and DRY OUT R which are clean outputs for both groups of voices. When being used, these outputs are dropped out from the general mixer and no longer go to the filter and to the effector. Then you can return one of the processed channels to EXT AUDIO input so you can create stereo sounds. In this case the contact microphone inside the keyboard always goes to the filter and to the effector by default. It also controls the ENVELOPE follower / Gate detector, or you can choose to connect an external microphone, electro-musical instrument or guitar."
"neue Möglichkeiten für Siel Opera6, Kiwi, DK600 und Expander:
danke der neuen Firmware10+CC von Bob Grieb, www.Tauntek.com
und neuen Editoren für Max for Live von Clemens Bergthaller, Atlantik; Logic Audio, Reaktor und einem Patch für die Behringer BCR2000 sind dies Synthis über midi automatisierbar, Sounds lassen sich über Midi speichern u laden. Das Video zeigt die neuen Features, viel Spaß"
Googlish:
"new possibilities for Siel Opera6, Kiwi, DK600 and Expander:
thanks to the new Firmware10+CC from Bob Grieb, www.Tauntek.com
and new editors for Max for Live by Clemens Bergthaller, Atlantik; Logic Audio, Reaktor and a patch for the Behringer BCR2000, these synths can be automated via midi, sounds can be saved and loaded via midi. The video shows the new features, have fun"
"Kiwi, super technischer und optischer Zustand, kleine Kratzer, siehe Fotos
Tastatur komplett zerlegt u gereinigt, neue Batterie, factory sounds, frisch kalibriert,
mit neuester Firmware, Version 10 von Tauntek, siehe Video (ich bin Vertrieb für Deutschland):
alle Controller lassen sich über midi steuern (ausser den 2 wheels)
alle Sounds lassen sich in 1 Take über Midi laden und speichern
mitgeliefert werden Editoren für Logic, Reaktor, Max4live, und ein Patch für die BCR2000"
Googlish:
"Kiwi, super technical and optical condition, small scratches, see photos
Keyboard completely disassembled and cleaned, new battery, factory sounds, freshly calibrated,
with the latest firmware, version 10 from Tauntek, see video (I am a distributor for Germany):
all controllers can be controlled via midi (except the 2 wheels)
all sounds can be loaded and saved in 1 take via midi
Editors for Logic, Reaktor, Max4live, and a patch for the BCR2000 are included"
"Opera 6,super technischer und optischer Zustand, kleine Kratzer, siehe Fotos
Tastatur komplett zerlegt u gereinigt, neue Batterie, factory sounds, frisch kalibriert,
mit neuester Firmware, Version 10 von Tauntek, siehe Video (ich bin Vertrieb für Deutschland):
alle Controller lassen sich über midi steuern (ausser den 2 wheels)
alle Sounds lassen sich in 1 Take über Midi laden und speichern
mitgeliefert werden Editoren für Logic, Reaktor, Max4live, und ein Patch für die BCR2000"
Googlish:
"Opera 6, great technical and optical condition, small scratches, see photos
Keyboard completely disassembled and cleaned, new battery, factory sounds, freshly calibrated,
with the latest firmware, version 10 from Tauntek, see video (I am a distributor for Germany):
all controllers can be controlled via midi (except the 2 wheels)
all sounds can be loaded and saved in 1 take via midi
Included are editors for Logic, Reaktor, Max4live, and a patch for the BCR2000"
Note the Synchronous Technologies SMPL System featuring SMPL Lock and MIDI instrument sync on back. Also the PAIA Programmable Drum Set.
"The two Paia catalogs are 22 pages total, the Wersi NOTES is twelve pages. All are from the 1980s. The Paia ones are in rough shape, but are totally complete w no marks anywhere. Much loved and pored over."
"The Erica Synths Black 3109 VCF/VCA is a lowpass filter and voltage-controlled amplifier combo built around the AS3109 VCF integrated circuit, a contemporary version of the IR3109 chip, found on vintage synths. Filters based on IR3109 had several drawbacks, including a volume drop when the resonance is increased so we added a volume drop compensation as well as a built-in VCA for more versatility in compact setups.
Timeline:
00:02 - Patch 1 - VCO through VCF which cutoff is modulated with the ASR envelope and sent through Black Hole DSP II
00:55 - Patch 2 - Basic waveforms from VCO through VCF with different resonance settings
02:13 - Patch 3 - Volume compensation test
02:50 - Patch 4 - VCO SUB out used as audio source of the VCF input and PULSE out from the VCO is used to modulate the VCF cutoff frequency. Black Hole DSP II stereo delay algorithm is used as FX
04:09 - Patch 5 - Creating bassdrum with self oscillating VCF which CV input is being modulated with ADSR envelope and then VCF output is sent through BH DSP II to add some overdrive and bitcrush
05:07 - Patch 6 - Stereo FM radio left channel sent through VCF and VCF cutoff modulated with the radio right output channel
05:35 - Patch 7 - Black VCO SUB mixed with PWM used as input for 3109 VCF linked with Black HP VCF using the VCF coupler module
07:27 - Patch 8 - Drum loop from Sample Drum sent through Pico E.F. and then trough VCF which is modulated with the CV contour which is extracted from the envelope follower
08:01 - Patch 9 - VCO sent through VCF which cutoff is modulated with ASR envelope and VCA part is controlled with second ASR envelope from the Black Dual ASR module. BH DSP II high pass delay algorithm is used as FX
All sequences in the demo are created with the Black Sequencer module."
"The Erica Synths Black 3109 VCF/VCA is a lowpass filter and voltage-controlled amplifier combo built around the AS3109 VCF integrated circuit, a contemporary version of the IR3109 chip, found on vintage Roland synths such as the Jupiter series, Juno series and the SH-101.
The 3109 VCF/VCA is our attempt to recreate the iconic sound of these synths, but we also aim to improve upon it. Filters based on IR3109 had several drawbacks, including a volume drop when the resonance is increased so we added a volume drop compensation as well as a built-in VCA for more versatility in compact setups. Additionally, 1V/oct tuning is implemented so you can use this module for perfect VCF keyboard tracking and also as a VCO.
Features
24dB/oct lowpass VCF
Volume drop compensation
Built-in VCA
Cutoff level attenuverter
1V/oct tracking"