MATRIXSYNTH

YouTube via chamberofsounds | September 25, 2010

Chamber of Sounds on eBay

"Triggered the Jupiter III synth with a Univox drum machine using 2 outputs, so you hear both units at the same time. There's no effects, just the actual, sweet, analog sounds. The sky's the limit with the Jupiter III - only from chamberofsounds.com"

ether^ra CHANCED ALLOY NEST

YouTube via potterpaint2000 | September 25, 2010

"an improv featuring my Serge Creature/Seq A combo, a Doepfer Dark Energy/Tenori-on combo, a Korg MS20 loop and some fx. http://etherra.blogspot.com"

This Second Sleep - S' Wax Manual

YouTube via arthurpainter | September 25, 2010

"http://www.thissecondsleep.blogspot.com/
A short improv using my Serge Creature/Seq A. A bit of delay was added."

This Second Sleep - Failed Foot

"A test of camera, etc. using my Serge Creature/Seq A and my SQI Pro One"

Doepfer A-100 Modularsytem

YouTube via SyntheticMachines | September 25, 2010

"Demo track made with the Doepfer A-100 System. This is the basic system, upgraded with the AFG Livewire Oscillator and the Doepfer A-105 SSM 24db LP VCF. All sounds made with this system. As usual, multitrack recording + some external FX."

GetLoFi Cell phone MIDI Loop Sequencer Demo 1

YouTube via circuitmaster | September 25, 2010

"This is a demonstration of the GetLoFi MIDI Loop sequencer on a Nokia cell phone. The program is a Java application that theoretically should work on a wide range of older cell phones.

More information and download at www.getlofi.com"

Yamaha PSR E313 | TR808 | Minimoog V

YouTube via allanyamaha | September 25, 2010

"Little demonstration of Yamaha PSR E313 , TR808 and Minimoog V .

Yamaha PSR E313 : E-Piano and Bass
TR808 (Acoustica Beatcraft) : Drum Beat
Minimoog V : Pad

Song : B. B & Q. Band - Genie

by allanyamaha
Sep 25th , 2010
Thanks for watching"

Yamaha PSR E313 | TR808

YouTube via allanyamaha | September 25, 2010

"Another little demonstration of Yamaha PSR313 and TR808

Yamaha PSR E313 : Pads and HighTom
TR808 (Aucostica Beatcraft) : Drum Beat

by allanayamaha
Sep 25th , 2010"

MIDIbox of the Week

Top:
MIDIbox Seq v4 by gjvti

Bottom:
MIDIbox SEQ V4 by sineSurfer

via midibox.org

DIY Fonitronik Voltage Controlled Pattern Sequencer 8 VCPS8

via electro-music.com

"The VCPS-8 is a sequencer providing one channel of gates, triggers and CV. For control there is a clock in, manual step, manual reset and a reset in. The trigger length follows the pulse width of the incoming clock signal. The reset button is an stop/reset and inhibits the sequencer as long as pushed. However the reset input creates a short reset pulse from the incoming reset gate/pulse signal to prevent the sequencer from stopping. This comes in handy when resetting the sequencer using a divider. Think about it…

And then there is a section to provide voltage control of the gate/trigger patterns: CV in, manual pattern select (offset/fine), and two LEDs indicating the limits of the CV (0v 5V). The patterns of the 8 steps are under the control of an ADC, however each step can be set manually too, to overwrite the ADC pattern if desired.

Some time ago kind fellow CJ Miller sent me some old EFM schematics to upload them to my site. One was the ADC flash, based on LED driver ICs (LM3915). I thought about the use for an ADC module for a modular synthesizer and came up with the idea of controlling the steps of a sequencer with it. But why use expensive or hard to get LM3914/15? so I utilized an ADC0801 (or even 0804) for that purpose. This IC accepts 0V-5V input, so i put a simple CV processor upfront the ADC, with two additional comparators to drive indicator LEDs for voltages greater than 5VA or less than 0c.

bottom shot via oldmanfury