AMSynths JP6 Multi Mode Filter Demo AM8060 (JP 6 - Filter)

Demo AM8060 (JP 6 - Filter) by Sägezahn-smoo
"Lowpass -no reso, Lowpass reso, Highpass, Bandpass, then the same without FX at all."

via sequencer.de

Akai MPC 60 vintage sampler (OS V2.12, 5 sec sample time)

via this auction

SN 30425 - 00471

See Perfect Circuit Audio (RSS) for more.

CLICK FOR MORE »

Roland JP-8080 synthesizer

via this auction

SN ZL22468

See Perfect Circuit Audio (RSS) for more.

CLICK FOR MORE »

ARP Quartet synthesizer

via this auction

SN 87/378

See Perfect Circuit Audio (RSS) for more.

CLICK FOR MORE »

Korg MS2000B synthesizer

via this auction

SN 000088

Close-ups of the mic below.

See Perfect Circuit Audio (RSS) for more.

CLICK FOR MORE »

Roland Voice Crystal 4 64 Voice RAM for D-50 D-550

via this auction

See Perfect Circuit Audio (RSS) for more.

2 Tama Techstar TS206 Electronic Voice Drum Modules In Original Box

via this auction

SN 201764 & 201765

"Each module has two channels. The plug-ins are labeled, 'master out, each out, ext trigger in and pad trigger in”. The labels are repeated for the second channel. The knobs are labeled, “sens, attack, decay, noise, bend, tune, tone/noise, emphasis and level.'"

CLICK FOR MORE »

Synthesizers.com Dotcom Q960 analog sequencer

via this auction

Oberheim OB-8 with Factory Midi

via this auction

EDP Wasp Knobs

via this auction

"This listing is for ONE control knob taken from an Electronic Dream Plant (EDP) Wasp synthesizer. These are original parts but are used.

One problem with the Wasp synth was the tendency for the yellow caps on the knobs to fall off and then become lost. Most Wasps I have seen have one or more missing caps on the control knobs. One thing to note is that the D-shafts of the pots are not all lined up the same on the Wasp, so you may need to remove the cap from these knobs and relocate it so that it points the right way. On some of these knobs it looks like a previous owner (pre-1986!) might have glued the caps down, so you will have to do this with some care.

These control knobs don't come up for sale very often, and it seems to be impossible to get exact copies."