MATRIXSYNTH


Thursday, March 14, 2013

Richard Devine Takes a Make Noise MMG for an Acid Test




"Richard Devine takes a MMG module for an Acid test, driving it with a TB-303 sequencer."

Doepfer A196 PLL- Experiments with the Phase Locked Loop- Basic Patching Pt. 2 "PLL Arabesque" Cont.

Published on Mar 14, 2013 raulsworldofsynths·200 videos

"Continuing the exploration of a patch made famous by dougcl in his Youtube video "PLL Arabesque". Original patch diagram may be found by doing a google search for "mamonulabs pll". Sound and Video by Raul Pena."

All parts here.

METASONIX S1000

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Analog Synthesizer tube. Midi version. Discontinued. Made in USA. In perfect cosmetic and functional order. Their sound is not comparable to any other synthesizer by using valve in its circuitry. Very difficult to find these days, very few units were produced (this is number 12) and remains the most powerful synthesizer manufactured Metasonix. Comes with manual and AC power adapter for Europe..."

Make Noise Analog Memory Module

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Make Noise Eurorack Analog Memory Synth Module - Comes with all original packaging, Screws, Power Cable, Chain Cable
The Analog Memory module uses an innovative new data storage technology called "Mechanically Orbited Carbon," to store and recall control voltage values for use within the system. MOC RAM technology has the advantage of being completely passive, random access, non-volatile storage!
Each module stores up to 20 control voltage values in 4 columns of 5 values. Each stored value is programmed using its own convenient panel control knob
Data is accessed immediately at any time using the Pressure Points control module
Analog Memory requires connection to a Pressure Points
2 or more Analog Memory modules may be connected to a single Pressure Points module
Multiple Analog Memory modules may be chained or stacked to create larger data storage systems
Functions perfectly within the expanded Pressure Points/ BRAINS system
All outputs are capable of driving a passive 4 way mult without loading effects (no buffered mult needed here).
All required cables are included with each module
Pairs only with Pressure Points"

Vintage 1970s MCI Guitorgan Made in Waco TX USA

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Vintage 1970s MCI Guitorgan Guitar/ Organ Synth. Made in Waco Texas. Guitar is in overall excellent condition and includes pedal, cable and original hard shell case. This guitar has been tested and functions properly. The following frets work faintly or intermittently in the organ mode: G- 3rd fret, D- 8th Fret, A-13th Fret. They may need the contacts cleaned. This instrument has received a complete professional setup from our shop technician..."

Vintage Korg Mono/Poly Analog Synthesizer SN 376350

Note: Auction links are affiliate links for which the site may be compensated.
via this auction


Clavia Nord Lead 2 Virtual Analog Synthesizer w Gig Bag

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

Cynthia Modcan Modules

Note: Auction links are affiliate links for which the site may be compensated.

Full list of modules up for auction here.  Note these are from Cyndustries aka Cynthia.

Pictured:

CV Recorder 57a
SUPER DELAY 30a
4075 FILTER 36a
DUAL SAWTOOTH ANIMATOR
DARK STAR CHAOS
Wiard MINI WAVE BLACET

Sequential Circuits Prophet T8

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"Certainly one of the Kings of analogue poly-synths, up there with Yamaha CS-80, Elka Synthex, etc.

Final 3.8 Main ROM Firmware & MIDI Rev. Serial Number 5** (for the buyer only), so one of the last produced.

It is estimated there were only around 600 of these T-8’s made in total so certainly a very rare synth.

This T-8 is Ex Sequential Circuits European factory @ Mijdrecht in Holland initially, on release around 1984/5...

It has worked fine for me in that time but the following work has been done as refurbishment for this sale:

Calibrated/re-tuned to factory specification.

Tunes in less than 5-10 seconds now after 20 minutes warm up period.

PSU capacitors replaced with long life Phillips ones & checked the power rails to be within specification.

5 front panel tact switches replaced & all 7 rear jack sockets replaced.

New Z80B keyboard CPU fitted. 2 x new Common RAM fitted. 5 x new scratchpad RAM fitted.

All as a precaution for long term health & reliability.

(Receipts here for all replaced parts.)

Key bed and all keys individually removed & cleaned. (Pictures to prove.)

Key bed even over full span of 6 1/2 octaves. Spare spacers in Wine Country kit should you need.

After touch works 100% and always has in both Poly & Mono modes. (8 channels of after touch in mono mode.)
Front panel removed & cleaned, as well as all pots.

I replaced three key return hammer/spring/flanges when I bought it & still have two new spares.
Factory programs have been reloaded for this sale and as an excellent starting point for learning the strengths of this machine.

This work was carried out by an ex-BBC engineer/technician with 30 years experience of servicing analogue & electronics gear.

In addition to the work done as refurbishment, this T-8 comes complete with EVERY possible accessory

including some that you wouldn’t find with any stock T-8’s, as follows:

1. Original foot pedal.

2. Original bound user manual & multiple MIDI revision update manuals.

3. Original preliminary service data complete with RARE full original schematics.

4. Original technical service manual with tuning procedures.

5. 128 Factory programs cassette from Wine Country and also as sysex files on CD.

Note: This latest Rev T-8 supports MIDI program dump/load to/from PC via sysex.

(No need to bother with cassette loading.)

6. Wine Country long term survival kit including CEM3360 dual VCA.

7. Wine Country the diagnostics/service ROM & manual.

8. 1 page promotional colour ad from Sequential on release (from a UK published magazine.)

9. Custom made flight case made by Adam Hall, UK but with an Amptown, Hamburg sticker on it.

Weighs 48 Kg in flight case, less all accessories which will be in another box.

10. Mains voltage regulator for 110 or 220V output.

These extras alone would be worth £500-£1000."

Elektron Analog Four

Note: Auction links are affiliate links for which the site may be compensated.
via this auction
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH