via this auction
Thursday, October 17, 2013
Sequential Circuits Prophet VS SN 0250
Roland SH-101 SN 459261 with Phillip Rees MIDI-CV
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
via the seller: "Roland SH-101 which comes with a Phillip Rees Little MCV MIDI to CV converter, a pair of 3.5mm to ¼ inch jack leads for CV and gate, a device I made to filter out the hum from power transformers, a midi cable and a couple of patch leads as I have a few spare - they may be useful if you intend to use the MIDI to CV for other equipment...
I have calibrated the tuning so the octaves are correctly spaced and I also removed the keyboard assembly to clean the keys as best I could, though didn't disassemble the actual assembly. I have also given all the plastic knob caps a clean and cleaned and lubricated all of the potentiometers (sliders and knobs). There was some surface rust (probably battery leakage?) on the bottom plate and on a bit of the keyboard assembly which I have scrubbed off as best I can..."
via this auction
via the seller: "Roland SH-101 which comes with a Phillip Rees Little MCV MIDI to CV converter, a pair of 3.5mm to ¼ inch jack leads for CV and gate, a device I made to filter out the hum from power transformers, a midi cable and a couple of patch leads as I have a few spare - they may be useful if you intend to use the MIDI to CV for other equipment...
I have calibrated the tuning so the octaves are correctly spaced and I also removed the keyboard assembly to clean the keys as best I could, though didn't disassemble the actual assembly. I have also given all the plastic knob caps a clean and cleaned and lubricated all of the potentiometers (sliders and knobs). There was some surface rust (probably battery leakage?) on the bottom plate and on a bit of the keyboard assembly which I have scrubbed off as best I can..."
Roland TR-909 Rhythm Composer Drum Machine SN 381670
Waldorf microWAVE XT Shadow
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Very rare and highly desirable Waldorf microWAVE XT Shadow. Finished in Gunmetal Grey and Black. Only 666 made.
The screen is bright green, with a blue surround. The condition is very good. Fully functional.
This is a beautiful instrument and one for a collector."
via this auction
"Very rare and highly desirable Waldorf microWAVE XT Shadow. Finished in Gunmetal Grey and Black. Only 666 made.
The screen is bright green, with a blue surround. The condition is very good. Fully functional.
This is a beautiful instrument and one for a collector."
5U Intellijel Dr Octature
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Update: see the comments of this post for some more info.
via the listing: "I got this from David Dixon and it was built by himself and from his own system. In perfect shape and I highly doubt you will see anothe of these for sale there are not many iin this format and this was Davids own one he built for himself. It sounds truly amazing. Details as follows:
Dr. OctatureOctal phase shifted outputs Low Pass Filter and VCO/LFO
The intellijel dr. octature, another installment in the David G. Dixon 2164 series of modules.
The basis of the module is a 4-pole lpf inspired by the classic “cascaded ota” design, but realized instead with superior-quality 2164 vcas.
The “octature” refers to the 8 distinct, phase separated outputs (every 45 degrees, or two sets of four 180-degree shifted outputs). each pair has a different slope: 6db, 12db, 18db and 24dB.
The cascaded-stage design is similar to the filter found in absolute classics such as the roland jupiter-6 and sh-101. However, when put into self-oscillation this filter becomes a stable, 1V/Oct tracking LFO/VCO, with each of the 8 outputs giving a sine wave 45 degrees out of phase with the next.
Features:
Coarse and fine tuning
Range switch for lfo (0.017Hz to 300Hz) and vco (17Hz to 22kHz) modes
VC resonance with logarithmic response for smooth control
1v/oct temperature stable tracking
Mono/quad resonance gain distribution switch for classic or enhanced performance
Unipolar fm1 and bipolar fm2 attenuated CV inputs
Single pcb design (very shallow/skiff friendly)"
via this auction
Update: see the comments of this post for some more info.
via the listing: "I got this from David Dixon and it was built by himself and from his own system. In perfect shape and I highly doubt you will see anothe of these for sale there are not many iin this format and this was Davids own one he built for himself. It sounds truly amazing. Details as follows:
Dr. OctatureOctal phase shifted outputs Low Pass Filter and VCO/LFO
The intellijel dr. octature, another installment in the David G. Dixon 2164 series of modules.
The basis of the module is a 4-pole lpf inspired by the classic “cascaded ota” design, but realized instead with superior-quality 2164 vcas.
The “octature” refers to the 8 distinct, phase separated outputs (every 45 degrees, or two sets of four 180-degree shifted outputs). each pair has a different slope: 6db, 12db, 18db and 24dB.
The cascaded-stage design is similar to the filter found in absolute classics such as the roland jupiter-6 and sh-101. However, when put into self-oscillation this filter becomes a stable, 1V/Oct tracking LFO/VCO, with each of the 8 outputs giving a sine wave 45 degrees out of phase with the next.
Features:Coarse and fine tuning
Range switch for lfo (0.017Hz to 300Hz) and vco (17Hz to 22kHz) modes
VC resonance with logarithmic response for smooth control
1v/oct temperature stable tracking
Mono/quad resonance gain distribution switch for classic or enhanced performance
Unipolar fm1 and bipolar fm2 attenuated CV inputs
Single pcb design (very shallow/skiff friendly)"
Mungo d0 Delay Demo
"Sounds of the Mungo Enterprises d0 dual channel delay module. More info:
navsmodularlab.blogspot.de/2013/10/mungo-d0-delay-demo.html"
Xenophone - New Monophonic Analog Hardware Synth from HyperSynth
"Synth-Engine:
Xenophone is an advanced analog mono-synth with 100% analog signal path. It has three oscillators, two subs, three ring modulators, one multimode VCF and analog distortion, all based on discrete analog circuits followed by a high quality stereo digital delay and reverb. The extensive modulation capabilities of the sound engine plus the warm and unique character of Xen's filter enriched by built-in analog distortion make it the best choice for creating deep basses, aggressive leads, transparent and crisp synth lines, acid sequences, complex arpeggios, punchy percussive sounds, extreme SFXs and more. Besides the synthesis capabilities, it can be used as a powerful audio processor to colorize an external input signal by analog filter, distortion and DFX.
Control and User Interface:
26 encoders and 27 buttons put all the major parameters easily reachable with no menu diving. The Encoders smoothly turn and provide you 96 steps per rotation that mimic pot's feeling and sweep range. The layout is designed in a way to be simple and intuitive. Using 88 LEDs and a free-angle OLED display, it is easy to get the idea of the current preset at a glance. Master Tempo and all LFOs have blinking LEDs that show the BPM and rates. The presets can be previewed without external keyboard using 3 buttons in 3-octave range or pre-defined notes. User interface is easy to learn and creative with no useless bells and whistles. You can get a huge sound out of the box only with a few tweaks and changes.
Enclosure and Connectivity:
Xenophone has a rigid Aluminum enclosure that comes with a pair of vintage style hand-made wooden side panel that made out of maple wood in two options: flat and tilted.
The box connects to the outside world using 2x balanced outputs (stereo), 1x headphone jack, 1x external input, 1x CV input, MIDI in/out, USB and DC power in.
MIDI and DAW Integration:
Xenophone can function as a standalone instrument or fully programmable synth. It responds to the standard MIDI messages plus dedicated CC and NRPNs. The maximum implemented resolution in NRPN mode is 12bit, 4096 steps for filter frequency that provides super smooth sweep over the frequency range in compare to 127 steps CC standard!
The computer integration is an important feature of a modern synth that plays vital role in the studio. Xenophone comes with a software editor called: XEditor. Using this editor you can control and automate every parameter of the sound engine remotely via MIDI and storing your patches on your PC and vise-versa. It also helps you in deep and precise editing the patches. "XEditor" will be available as standalone and VST plug-in."
http://www.hypersynth.com/xenophone.html
FATCORE analog synth
Published on Oct 17, 2013 antistatic81·22 videos
"hi, here's another tweaking of Fatcore halfmodular synth with Cy-Clone analog sequencer by searchsound.org"
"hi, here's another tweaking of Fatcore halfmodular synth with Cy-Clone analog sequencer by searchsound.org"
Electro Lobotomy Poly Touch Board + Modular Synthesizer // 1
Published on Oct 17, 2013 electro lobotomy·176 videos
"Super excited about the new Poly Touch Board!!!
https://www.etsy.com/shop/ElectroLobo..."
"Super excited about the new Poly Touch Board!!!
https://www.etsy.com/shop/ElectroLobo..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
