Prophet6 & Keystep

Published on Aug 19, 2016 Cold Colors

Vibrant Thonk Synth T-Shirt Coming Next Week

via @thonk_synth

"New Thonk T-shirt coming next week #prism #squint #drunk #chromaticabberation #trippy #pride https://www.instagram.com/p/BJSwwuzjC_-/"

Some great tags there. :)

http://www.thonk.co.uk

Oxygene on a Korg PS-3200

Published on Aug 15, 2016 Rafa Saez

"I used space echo Roland re-201 (delays) , artsacoustic_bigrock (phasers) , Big Sky (reberbs) , Korg PS3200 (main sound) , Moog source (Monophonic sequences) , Roland JD-800 (all strings and pads) , Oberheim Matrix 6 and Waldorf Microwave (double bassline) ."

Korg PS 3200 demo sounds Oxygene 4 melody

Published on Jul 10, 2016

"Korg PS 3200 demo sounds Oxygene 4 melody"

Moog BFAM (Brother From Another Mother) analog synthesizer and sequencer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

via the seller: "I'm selling my BFAM (Brother From Another Mother) analog synthesizer and sequencer. I built it in May of 2016 at the Moogfest Engineering workshop in Durham, NC. According to the Moog engineers, it was an early prototype for the Mother 32 synthesizer and will not be available commercially.

Ebay won't let me link directly to Modulargrid, but if you search that site for BFAM, there is additional information about the synthesizer, including videos,

Single VCO, with saw & pulse wave forms
Noise
Mixer
ADSR envelope
Pulse Width
VCF with cutoff and resonance and VCF EG Amount control
8-stage analog step sequencer, with control over glide, gate length & clock rate and per-step gate control - sequencer can be routed to pitch, filter cutoff, or another destination via patch point
16 x 3.55mm patch points on front panel
1 6.55mm output in back (when using provided case)

NOTE - this was built from a kit during the workshop, so know what you are buying - this is not a Mother 32. The synthesizer and sequencer work great, but it was not built in a factory. It was calibrated and checked by Moog engineers during the workshop."

CLICK FOR MORE »

Original Moog Polymoog Synthesizer 203A Polypedal 285 Technical SERVICE Manual VII Norlin

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Original Norlin Service Manual - Not a Photocopy, PDF, or a CD

Company: Moog

Title: Technical Service Manual
Norlin Cat #: 993-042314-001

Model: PolyMoog

Part: 203A & 285

Type: Analog Synthesizer & Pedal

Dated: 1978

Tabbed Contents
General Information
Top Boards
Control Boards
Power Supply
Divider,High Frequency Oscillator
(Low & Medium)Mother (board), Modulator, Balance

Poly pedal Schematic and exploded parts diagram is located within the General Information Tab"

CLICK FOR MORE »

Original Moog Micromoog Synthesizer 2090 Technical Service Manual

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Original Moog Manual - Not Photocopies

You will receive exactly what you see pictured in the Auction

Company: Moog

Title: Technical Service Manual


Model: Micromoog 2090

Cat# 14-024

Type: Keyboard

Dated: 1976

Contents:
40 pages, paper covers, stapled binding

In 6 Sections - includes 354 Figures, 7 Tables

1) Introduction,
2) Circuit Description
3) Disassembly Procedures
4) Tuning and Adjustment Procedures
5) Troubleshooting Guide
6) Replacement Parts List

Included in section 6 - Block Diagram, Harness Assembly, and Schematic Diagram"

CLICK FOR MORE »

Patch Notes #14 - Make Noise 0-Coast Dubstep Wobble Bass

Published on Aug 19, 2016 Voltage Control Lab

"Patch Notes 14 explores the patching demonstrated in our recent Dubstep Wobble Bass tutorial with the Make Noise 0-Coast with the Korg SQ1.

The 0-Coast and SQ1 are patched exactly like the previous tutorial, with the SQ1 clocked by the Make Noise Tempi, and the 0-Coast routed out to the Malekko Mix4.

The lead sequence is being played by the Make Noise René, also clocked by Tempi, routed out the DPO. The DPO Final output is routed to the MMG, then to the Optomix and out through Mutable Instruments Warps running Parasite firmware in pingpong delay mode. Then the signal is patched to the Mix4.

The René X-gate output is routed to the Malekko ADLFO, triggering two envelopes routed to the MMG filter frequency cutoff and the Optomix control input. The left over group of 3 ADLFO functions are in Loop x10 mode to generate longer LFOs. One is routed to the FM Bus on the DPO, the sum output is routed to the Mod Bus index. One channel on the Ornament & Crime (in Quadraturia mode) is also routed to the Mod Bus external source input.

Another one of the O&C outputs is routed to modulate the Timbre control on Mutable Instruments Braids in WTx4 mode, playing back the chords. The pitch is modulated by a channel on Make Noise Pressure Points (clocked through Brains by Tempi), while the note triggers are coming from a channel on the Malekko Varigate 4 (also clocked and reset by Tempi).

Another channel on the Varigate 4 is routed to a mult, then to the Roland Scooper to trigger a hihat, as well as to the Doepfer A-151-2 Sequential Switch. The signal is then toggled via 2 channels of Pressure Points summed through Maths, between 2 destinations, the Kick (from the Dual Borg/Envelator combo we’ve explored before) and the Snare (from the Noise Engineering Basimilus Iteritas). The drums are routed through the Scooper, and then to the Mix4 (which is the final output).

https://www.voltagecontrollab.com/"

Gary Numan's New Minimoog Model D

via @numanofficial

"My Moog Innovation award has arrived. A new MiniMoog D. Huge thanks to Moog, I'm honoured & grateful. @moogmusicinc pic.twitter.com/5lh2NsxXBr"

OTO BAM

Love the yellow on green.

Just a nice shot via Thonk on Instagram who made a couple of comments on it:

"It really nails that 80s reverb thing, really nice chalky psychedelic edges on things... it has the more rich plasticy eventide sound like the harmonizer rather than the quadraverb fuzz"

Kawai K5000W Additive Synthesizer demo

Published on Aug 19, 2016 AreggerOrchestra

"Quick track made with the K5000W. Custom patches, constructed mostly with additive synthesis. Sequenced with the internal sequencer. No external processing."