Hypersynth Xenophone in White & OS Updates

via Hypersynth

"Firmware v2.1 Additions & Fixes:

-Optimized system performance.
-Added option to copy and paste a sequence from one preset to another.
-Added "De-zipper" to remove zipper noise of filter freq knob and modulation wheel.
-Removed: [Freq Enc Ratio] in global menu.
-Now semitone knob changes the oscillator pitch smoothly without any stepping.
-Now the OLED display makes less jumps while two knobs are tweaked at the same time.
-Now "Arp latch" can be set in Arp menu using soft knob [E4].
-Increased preciseness of the numbers that are displayed for LFO rates and ENV parameters.
-Fixed Arp pattern reset issue while changing oscillator's transpose and cent.
-Fixed compare button issue that sent out unwanted MIDI messages.
-Fixed FM level issue that displayed wrong value on the screen after being modulated.
-Fixed soft knob [E2] problem that did not transmit after touch message when "Panel TX MIDI= ON".
-Fixed bug that caused knobs send out of range MIDI messages when "Panel TX MIDI= ON".
-Fixed problem in receiving "bank select" followed by "program change" message via MIDI.
-Minor improvements in updating parameters via MIDI.
-Renamed: SEQ-T1/2/3/4 to "SQ-NOTE", "SQ-VEL ", "SQ-AUX1", "SQ-AUX2" in Mod Matrix source list.
Firmware v2.0 Additions & Fixes:
- Added Duophonic mode.
- Now all parameters with dedicated controls (knob/button) respond to soft knobs.
- Now you can fine-tune Filter Frequecny, Env depth and LFO rates using soft knobs.
- Now for all buttons, first click displays parameter's edit-page without changing the value.
- Now LFO rate LEDs fade up/down according to LFO wave.
- Redesigned envelope display format.
- Now envelope page 2 and 3 are merged to show Delay/Hold/Style/Trigger in one page.
- Now SEQ edit-pages memorize the last edit position.
- Now you can navigate to all Arp/Seq edit-pages using [select] button.
- Now external clock does not trigger notes when Arp/Seq set to off.
- Now [preview] buttons do not trigger Amp envelope when "arp span=off" (Start/Stop mode).
- Now OSC3 does not respond to pitch wheel data when keytrk=off.
- Minor improvements in captions and text location on the screen.
- Fixed OSC3 random pitch change when keytrk=off.
- Fixed CV-Out reversed order in global menu (V-Trig/S-Trig).
- Fixed Amp Envelope malfunction in RC style with long attack and release (Trig=Analog1/2).
- Fixed issue in starting point of Amp Envelope release stage.
- Fixed Amp Envelope style problem that could be set to an out of range value after "EXP".
- Fixed Arp pattern reset issue while changing detune and drift parameters.
- Fixed portamento time problem that was not changed during gate-on time.
- Fixed "LFO3 Target" that was displayed wrongly as "LFO2".
- Fixed issue with "Filter Env Depth" and "LFO1/3 Depth" that could not be set to zero in some circumstances.
- Fixed soft knob E4 malfunction in last page of main section.
- Fixed rare bug that caused soft knobs to be temporarily disabled after updating ENV parameters via MIDI.
- Fixed bug in "UI-Fixed Mode" that caused unwanted jump to OSC3 edit page."

Gecho + Fidget Spinners = Fun! :)

Published on Jul 13, 2017 Gecho Loopsynth

"The demonstration of high-pass filtering (as opposed to previously shown low-pass). Because this mode does not attenuate higher frequencies, faintest noises, scratches and taps can be heard perfectly.

More information at http://gechologic.com/"

New nonlinearcircuits Primal Hyperchaos Module

Published on Jul 13, 2017 cirtcele

"Hyperchaos module - can be built to run at a variety of rates. The versions in this vid use 1uF capacitors and then from approx 2:25 slow right down with 10uF"

Digitakt Techno Jam

Published on Jul 13, 2017 wouter van dam

"Since I found out how to mix songs inside digitakt/ rytm.... I can make live sets with only one device....

here I boost my digitakt with the heat

just some techno loops, jamming and recording"

New Moog MF-107 FreqBox Eurorack Module from Million Machine March

via Million Machine March

"What a useful module! Bringing this over to the eurorack world was a no brainer, because in the eurorack world an envelope and voltage follower are almost standard fare!

CLICK FOR MORE »

Buchla CVT Twenty

Published on Jul 13, 2017 Todd Barton

Buchla CVT

Blade Runner theme-s made at the Moog Mother64

Published on Oct 11, 2016

"just having fun with the Mother64"

Mother32 x 2.

Self playing Moogs, Buchla style

Published on Sep 29, 2016 Tobor Experiment

"The mighty Mother32 can indeed work with self playing patches Buchla style. Actually you will need two Mothers to make a Mother "64" fully capable of this and a lot more.

In this video the two filters are used as oscillators (the second VCO AM modulates the first also) and the sequencers are set in a feedback configuration using the two assignable outs as random voltages that trigger each other.
Mixers, assignable outs and multis are essential to the patch design."

TB-03 Dafunk fun

Published on Jul 12, 2017 Tobor Experiment

"just having fun cover-izing dafunk with TB-03 + volca sampler + Fender Precision bass + 1 sample on Logic (with no sync, ha!)

TB03 with onboard distortion d2 & delay
only one multi band compressor on the master and nothing else
done very quickly, I should have shifted the clap :P"

t.A.T.u All The Things She Said Live Synth Guitar Cover #tatu #t.A.T.u Ya Soshla S Uma

Published on Jul 13, 2017 LOOK MUM NO COMPUTER

"t.A.T.u All The Things She Said Cover. Ya Soshla S Uma
All played on the 1 guitar controller. Each string controls a separate synth.
One of my favourites from the early 2000's, you cant deny its a good song.
Drums From The YAMAHA DD10.
Controller is a Casio DG20 Pretty amazing for a piece of 80's obsolete equipment.

Check out my other video on this Guitar here :- [posted here]

Pedals turning on and off the actual signal coming from the guitar, going through reverb and overdrive.
vocals at the end going through distortion and reverb and compression. All live."