MATRIXSYNTH

Northern Light Modular 2OC cross patching

Todd Barton
Published on Aug 9, 2017

"more test driving of the Northern Light Modular's Dual CV Polymorpher 2OC for Buchla format based on the Ornament & Crime module"

You can find Todd Barton's first video on the Northern Lights Modular 2OC here.

Moog E-Pro Theremin controlling Buchla Music Easel via CV

Therminal C
Published on Aug 9, 2017

"USE OF CV IN THEREMIN PLAYING : The theremin's CV pitch is controlling Buchla Music Easel sequencer, for transposing the sequence, playing a second voice & controlling the speed f the sequencer."

ALM - Pamela's NEW Workout Drum Jam

DivKidVideo
Published on Aug 9, 2017

"Pamela's NEW Workout from ALM Busy Circuits is killer! Really enjoying my time with it so far and here's a little drum jam with rhythms and modulation all coming out of the NEW Pam."

Landscape - Stereo Field

Knobs
Published on Aug 9, 2017

"Conduct, and be conducted.
http://www.landscape.fm/

0:26 - Overview
1:40 - Basics
3:25 - As a controller
4:14 - As an instrument
5:44 - With drums
6:35 - With a stereo drone
7:24 - AllFlesh
7:42 - Outro"

via Landscape:

"STEREO FIELD is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV controller. All three uses are available separately as well as simultaneously and in conversation with each other. The Stereo Field allows its user to manipulate and patch two analog stereo circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating new circuits and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate). When touched with multiple fingers it will create atonal analog synthesized audio with either of the two mirrored circuits represented by interlocking touch-plate circles. These parallel mirrored circuits can be finger patched separately or together yielding vastly different results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact. The two stereo input volume knobs (center) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching. Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esk sound shaping in addition to bringing new results to finger patching via the touch plates. Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who? who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

CLICK FOR MORE »

Corsynth C103 Frequency Divider / Multiplier MKII

Corsynth
Published on Aug 9, 2017

"Corsynth C103 Frequency Divider / Multiplier MKII . Basic demo using the module in a musical context ."

More posts featuring the Corsynth C103.

Fénix II modular synthesizer built by the Synton team + manual + spare part kits

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Up for sale is a (1) very rare Fénix II modular synthesizer, built by the original 1973 - 1989 Synton team. The synthesizer is in good working condition and sounds amazing! Cosmetically it's in near mint condition with only some minor scratches on the wooden side panels, around the sequencer cv output socket the metal is been damaged a bit, and there's very little wear and tear on the knobs and case (see photo's). Overall it's a beauty instrument which deserve a good new home. Only 75 units were built and this is one of them.

It's complete with a lot of banana patch cables in different colors, owner's manual, power supply with European plug installed and two original spare part kits. It's working on 230V. The serial number is: FénixII-18-R1."

CLICK FOR MORE »