MATRIXSYNTH


Friday, March 15, 2019

TTSH ARP 2600 Clone with Custom MIDI upgrades built by Michigan Synth Works

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Please note there are extensive modifications for MIDI and multiple patch points on the side panel that were a custom upgrade from Michigan Synth Works. You can use this as a traditional 2600, or if you want to take it a step further with additional CV or gates or MIDI sequencer or controller you can do so."

Moog Polymoog 280A Analog Polyphonic Synthesizer SN 1639

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Moog Polymoog 280A Analog Polyphonic Synthesizer Vox Humana

Plug into Direct output and set it to Vox Humana!

Instant Gary Numan!

This Polymoog is in pretty nice shape.

Everything works as it should."

Wersi Wersimatic CX2 1985

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"For sale is the extremely rare Wersi Wersimatic CX2. The CX2 is a combination of a digital drumcomputer and preset synthesizer/organ. The drumcomputer section consists of 54 preset rhytms, but it is also possible to compose your own rhytms by using its composer (static/real time composing) and the 14 different drum sounds available. It also has accent.

The accompaniment section has a bass (guitar, synth, tuba), chord (e-piano, guitar, wah guitar, strings, organ), and arpeggio section (brass, clarinet, banjo, bells, strings, single notes) which can be played solo or combined. When the drumsection plays the accompaniment section can be triggered by pressing keys. It automatically follows the rhythms.
However, you can also make your own BASS solo, chords, and arpeggio patterns !!

This is a great instrument for modding. SSM2044 chips are installed on two of the cards, and a filter/resonance function can be easily added. Other possible modifications my be separate outs and volume pots for drum sounds and accompaniment, clock synq, etc. I prefered to leave it in original condition and let the next owner do this if preferred."

teenage engineering support stream on the po modular 400 + OP-Z oplab module


Published on Mar 15, 2019 teenageengineering

"hello world from the new teenage engineering office. this is a test stream where we'll talk about the po modular 400 + OP-Z oplab module."

And:

teenage engineering support stream - how to verify oplab module working

Tiptop Audio patch example #3


Published on Mar 15, 2019 Station 252

"Next video in a series of my daily Tiptop Audio System patches. This time using TG ONE as a sound source.
TG ONE, Z3000 oscillator, VCA, 2x Z4000 ADSRs, Forbidden Planet VCF, Z2040 VCF, Z8000, Trigger Riot, Circadian Rhythms, 2x Z-DSP and a soon to be released module that falls into the ''I never knew I needed one'' category"

Polyend Perc & Seq mashing the congas


Published on Mar 15, 2019 Polyend

Friday Jam #3 - SKULPT + Phaser, Bass Guitar and Drum Machine


Published on Mar 15, 2019 Modal Electronics

"Friday Jam #3 - 2 minutes of what it sounds like to pair SKULPT with a phaser, a drum machine and a bass guitar. A moody little jam from the Modal studio."

CLOCK MANIPULATOR


Published on Mar 14, 2019 Michael Rucci


via RUCCI

"This device manipulates clock pulses in three ways. “Humanize” sets the amount of delay randomly applied to clock pulses. “Improbability” increases the likely hood that a clock pulse will be held back from being passed through. Finally, “swing” will delay every other pulse to change the feel. It works with either external 5V clock sources or can generate its own clock.

All three effects can be used simultaneously and mixed for desired result. This works well paired with a sequencer or drum machine to smooth out robotic perfection, add a groove feel, or create some chaos.

There is a speed control for the internal clock generator which is overridden when an external clock source is connected. In addition to a power indicator, a 2nd LED displays the original pulses and a 3rd LED shows the manipulated pulses.

Clock in and out are 1/8″ jacks. It is built in an aluminum enclosure and powered by an included internal 9V battery or any 9V Center-Negative DC adapter. Connecting a power supply will automatically disconnect and reserve the battery. This was designed and hand-built in Oakland, California.

Shipping to the US is a flat $10, everywhere else is $22 for the first item and $8 for each additional item.

Ships next day."

EuroTile - Modular System for Eurorack 1U Tile modules


Published on Mar 15, 2019 SYINSI

"EuroTile is a complete, compact modular instrument built around the popular 1U Tile format."


via SYINSI

"1U Tiles are small modules typically used with the Eurorack modular format to add utilities in rows across a modular system. We use 1U Tiles to create all of the modules found in a modular system, such as VCOs, VCFs, etc.

Now a complete modular synthesizer can be made entirely with compact and inexpensive 1U Tiles.

Friday Fun: Dreadbox Hypnosis and Erebus V3 Synth Jam


Published on Mar 15, 2019 sonicstate
Update: Re-Published on Mar 20, 2019 as Friday Fun - Dreadbox Hynosis Synth Jam (re-uploaded)

"We have one of the first models of the Dreadbox Hypnosis Time Effects Processor. We're pairing it with the Erebus V3.
A nice and simple setup which results in some lovely sounds (we think)."
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH