MATRIXSYNTH


Tuesday, March 19, 2024

Poly sequence without sequencer on KORG R3 synthesizer


video upload by Jake

"A song combining several sequences on a KORG R3 synthesizer without sequencer thanks to the Motion Sequencer

The R3 is a bi-timbral synthesizer.

Although it does not have a sequencer per se, it has the "motion sequence" function.

If motion sequencing allows you to automate a parameter over 16 steps, it can be dedicated to the pitch of the notes.

We thus have 2 sequences for the same patch, each controlling its own tone.

On timbre 1, in order to make the sequence more complex, I allocated each of the 2 filters to its own oscillator. Thus on timbre 1 the slow variations of LFO 1 control filter 1 in positive and 2 in negative.

LFO 2 is synchronized to the motion sequencer in the form of a sawtooth wave to simulate a filter envelope trigged to the note

On tone 2, LFO 1 in the form of a square wave at slow speed allows the sequence to be transposed to the seventh at 0.75 hZ.

LFO 2 has the same function as on timbre 1

Recorded in one take without any external effects"

Live session - KORG R3 - KAWAI SX-210 - CASIO CZ-1


video upload by Jake

"Live recording 2020

Synthesizers used for this track
KORG R3 - digital synthesizer - 2007
CASIO CZ-1 - Phase distorsion digital synthesizer - 1986
KAWAI SX-210 - analog synthesizer - 1983


This recording is the first track you can hear on my last album
'Compact Music Vol.2'

This album have been mastered by Angel Freddy - http://www.moloski.com

You can buy this album
https://www.discogs.com/fr/release/28...
https://jacquesjeangerard1.bandcamp.c...
"

A Rat, a DB-01 and a Light pedal cranked for filth and feedback


video upload by Richard DeHove

"I've always wanted ferocious feedback on a synth, just like them geetar players get. The obvious choices are a FreqOut or even an old Boss FB-2. But how about a Gamechanger Audio Light reverb pedal and a Rat ? One reason I got the Light pedal was its interesting modes, gate and drive. By itself a lot of the options feel very underpowered when fed by the DB-01. But add a Rat after the reverb and everything comes alive.

Here I first try the Light pedal's Reflect mode which is a dirty delay, then the Feedback mode. The Rat is vital to crank the Light pedal's effect although it does add a huge amount of noise. Ideally I'd add a noise gate after the rat and then a delay. Perhaps even a pitch shifting delay to try to get a little more pitch control over the feedback.

With it's little Rat friend the Light pedal now seems a lot more useful.

As usual there's absolutely no other audio processing than what you see.

0:00 Starter sound
1:25 Reflect cranked
2:42 Light pedal options
4:48 Feedback mode
8:28 Sequenced feedback
9:25 Keys feedback

Lots of downloads for supporters on Patreon: https://www.patreon.com/richarddehove
Many thanks to my kind patrons who keep this channel ad-free My website: https://richarddehove.com/"

Manual Dexterity


video upload by Todd Barton

"An unfolding of this patch over on my Patreon: https://www.patreon.com/synthtodd"

Update:

Manual Dexterity unfolded

video upload by Todd Barton

Sequential Pro 3 ► Sound Demo [30 MINUTES]


video upload by Mr. Card

Contents:
00:00 10 minutes of sound exploration
09:34 Brass sound
13:39 Pad sound
17:51 Paraphonic sound
22:06 Sweet sequence
26:39 5 minutes of sound exploration

Synth bass riffing on the Prophet 5. #synthfunk #80s #synthesizer #music #synth #prophet5 #funk


video upload by The Murph

Sequential Tom Oberheim Dave Smith OB6 variable state SEM filter.❤ (Hydrasynth EP)


video upload by Dave Bellamy

"I just adore the Sequential Tom Oberheim Dave Smith OB6 variable state SEM filter.❤ (Hydrasynth EP)"

Elmyra2 Revisited with Imitor, Melotus & Desmodus Versio


video upload by Cinematic Laboratory

"It's been two months since I supported the Elmyra2 launch wave. But it's not gathering dust. It's maturing like good wine. This video doesn't add much to the first one, except I'll be using a lot more CV and starting RAW with no effects. Indeed, it reminds a bit of the Lyra-8 sonically, but the Elmyra is much easier to control and there's no built in FM. You'll need a masterclass for Lyra-8, but you can just play Elmyra and make dark organic drones, textures and music. I've included some short Lyra-8 snippets for you to compare. Elmyra 2 can't go to the high notes, where Lyra-8 can go higher than you can hear. So I will not compare them, but enjoy them both."

Octatrack Performance Mixer 3.0: 64 Custom FX, Live Looping, and more!


video upload by EZBOT

"The Octatrack Performance Mixer 3.0 Template is a game-changer for live electronic music performers, offering an intuitive and meticulously crafted toolkit for creating dynamic and immersive live performances with your favorite drum machines and synthesizers. There are 20 all new effects not seen in any previous performance templates. With an 8-bar or 4-bar structure that syncs seamlessly to the Octatrack's clock or an external clocking source, this template provides a vast array of effects, including synced modulation, noise risers, comb filter risers, sidechain pumping, stutter effects, filters and more, all accessible with user-friendly controls. It empowers performers to build tension and deliver impactful drops effortlessly, while also offering the flexibility to customize compressors and fine-tune the sound to their liking. This template like the others before it is built around two input busses with discreet effects for both. Input A/B is your DRUM or PERCUSSION bus, and input C/D is your MELODIC bus. Each have there own separate compressor and freeze delays. Whether you're a seasoned artist or just starting your journey in electronic music, this template offers an inspiring and versatile platform to elevate your live performances and captivate your audience with mesmerizing soundscapes.

Download the Template here: https://ko-fi.com/s/c71520e99c and here https://www.patreon.com/ezbot

Get 10% Modbang cables with code: EZBOT23
SHOP HERE: https://www.modbang.com/modbang-shop"

Roland TB-303 computer controlled Bassline How To Make Acid Techno Chicago house Music

Note: Auction links are affiliate links for which the site may be compensated.
video upload by tonetweakers

"Programming a Roland TB-303 pattern. Here’s the properly refurbished 303 we recently sold and shipped to the repeat customer who bought it (thanks as always!). What’s your favorite 303 track? One of ours is Let Me Go By Heaven 17 - they rocked it back when it was new, long before acid house and techno!"

https://tonetweakers.com

Tone Tweakers eBay | Reverb

PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH