P12 & Seq

video upload by peff

Buchla Patch demo LBFI-25.031

video upload by peff

project demo reel for Luis Bunuel Film Institute
Reference LBFI-25.031
Recorded material source: Belle de Jour.

For SC

video upload by peff

ReBirth RB-338 - Red Stripe Mod Demo

video upload by peff .com

"The Red Stripe mod for ReBirth RB-338 was a collaborative effort with Thomas and Wolfgang Merkle of Bitplant. This project was organized as a branding campaign in 1999, through the beverage distributors' UK marketing agency, 5emedia, LTD.

In order to establish the fast drum roll effects, the transport is set to run at 338 BPM, and two pattern slots are required to complete a full measure of 32 steps. I had quite a few keyboard shortcut hacks set up on my version of ReBirth RB-338 which helped me quickly work around these complicated pattern arrangements."

3rd Wave Multitrack Demo - Peff

video upload by Groove Synthesis

"3rd Wave multitrack demo. Programmed, performed, and recorded by Peff. All sounds by 3rd Wave — including the percussion. Contact us: info@groovesynthesis.com for questions or sales@groovesynthesis.com to pre-order.

https://www.instagram.com/groovesynth... https://www.groovesynthesis.com

Follow Peff (Kurt Kurasaki):
https://www.instagram.com/peff https://twitter.com/peff"

A Short Meditation On The 3rd Wave

video upload by Groove Synthesis

"Sound Designer Peff shares a short piece that shows the meditative side of the 3rd Wave. Contact us: info@groovesynthesis.com for questions or sales@grovesynthesis to pre-order.

And come see the 3rd Wave in person at NAMM ’22, June 3-5!

The 3rd Wave is a powerhouse wavetable synth with analog filters, 24-voice polyphony, and 4-part multi-timbral performance capability that’s like having four independent synthesizers at your fingertips.

https://www.instagram.com/peff/

https://www.groovesynthesis.com"

See the Groove Synthesis label below for more.

New Groove Synthesis 3rd Wave PPG Inspired Advanced Wavetable Synthesizer in the Works

View this post on Instagram

A post shared by Kurt Kurasaki (@peff)

PPG inspired wavetable synth with a few new tricks up its sleeve. More info coming soon...

Click the pics below to zoom in. You can clearly see three wavetable oscillators, modulation (4 LFOs), sequencer, apreggiator, two filters (low pass & state variable), four envelopes, multi-part, display, and more. Note the Wavesurfer knob above the sequencer, and the waveflow button to the far left.

https://www.groovesynthesis.com

Sequential Take 5 Programs by Peff

peff · Sequential Take 5 Programs

"Programs submitted for consideration in the Sequential Take 5 factory set. Recorded directly from the instrument with no additional processing or effects."

https://www.sequential.com/product/take-5-compact-poly-synth/

modosc designs ID700 preset development demos

peff · modosc designs ID700 preset development

"The ID700 from modosc designs is based on the architecture of the Buchla 700. The sounds in this list are examples from preset development.

Available on the App Store here.

More information available at: modo.sc"

Follow-up to this post.

Rossum Electro-Music Assimil8or Eurorack Sampler

Published on Mar 24, 2020 peff .com

"Rossum Electro-Music Assimil8or Eurorack Sampler Testing"

Propellerhead Complex-1

Published on Aug 12, 2019 peff .com

"run through of a few patches I created for the Complex-1 synth"

808 + Rossum Filters

Published on Aug 7, 2019 peff .com

"Happy 808 Day!"

Rossum Control Forge 1.2v/oct test with Buchla 259

Published on Oct 22, 2017 peff .com

"8 stage stepped envelope preset acting as a sequencer with 0.1volt values to control Buchla 259 complex waveform oscillator."

DSI Prophet Rev2 Desktop Synth Available in October

The desktop version of the Dave Smith Instruments Rev2 will be available in October.

via @dsiSequential

"#ProphetRev2 module - available October 2017
Photo courtesy of Kurt Kurasaki | @peff"

ReBirth for iPad

Published on Jun 15, 2017 peff .com

"Because this day, June 15, 2017 marks the official end of Propellerhead ReBirth RB-338, I'm revisiting an old RBS song file."

This one made me a bit sad. I just checked iTunes and it is indeed gone. Hope all got your copy in time. :(

That said, this is a great send off. Thank you peff!

Moog DFAM - Drummer From Another Mother Demo

Published on May 25, 2017 peff .com

"During the Moogfest 2017 Engineering Workshop, the Moog Music staff showed us how to build this unique drum synth. Here's a few minutes of footage demonstrating some of the sounds.."

Rossum Control Forge Demos by Peff

Published on Nov 3, 2016 peff .com

"Preset Sequence Testing with QuBit Nebulae, Rossum Evolution, Metasonix RK1, and Buchla 259. MakeNoise ModeMix is acting as a VCA."

Rossum Control Forge Real-Time CV mod

Published on Nov 3, 2016

"Control Forge as a eurorack step sequencer."

New Minimoog Model D in the Works? Spotted at Moogfest!

Minimoog Model D Pilot Production

Published on May 19, 2016 Moog Music Inc

Update5: We now have confirmation with an official video from Moog Music.

"After more than 30 years, the Minimoog Model D returns with a pilot-production run at Moogfest 2016 in Durham, NC. Handcrafted in the Moog Pop-Up Factory, the pilot-production units built during the festival will only be available for purchase on-site in the Moog Store by Guitar Center."

Update6: and a video from Moogfest:

Moog Reintroduces The Minimoog Model D - Moogfest Video

Published on May 19, 2016 Synthtopia

"At Mioogfest 2016, Moog Music has reintroduced the classic Minimoog Model D.

We talked with Moog's Nick Montoya about the new Minimoog Model D, what's changed and what they've kept the same.

They've gone to great lengths to recreate the iconic Minimoog sound - but also added a new LFO, a better keyboard and support for additional control voltage options."

Inside The New Minimoog Model D

Published on May 22, 2016 Synthtopia

"At Moogfest 2016, Moog reintroduced the classic Minimoog Model D.

We talked with Moog's Nick Montoya, gave us a tour of the inside of the new Minimoog Model D, and explained some of the lengths they went to to nail the original Minimoog sound, and also what they changed to make the new Minimoog more reliable."

How To Build A New Minimoog Model D Synthesizer

Published on May 26, 2016 Synthtopia

"At Moogfest 2016, Moog reintroduced the classic Minimoog Model D synthesizer.

They also had a 'pop-up factory' onsite at the event. Basically, they moved their production line to Durham for the week and were assembling the new Minimoog's at the festival.

We talked with Moog's TJ Mills, who gave us a tour of their assembly process.

They start from a collection of individual parts and pre-assembled components from suppliers. The circuit boards, for example, are supplied pre-populated, using a variety of new and 'new old stock' parts. And the metal components are supplied reshaped and drilled to Moog's specifications.

In the video, TJ discusses what gets done at each stage of their assembly process, and how they calibrate and test the synthesizer once it is assembled."


Original post:

This one in via Soviet Space Child, via @Peff

I heard a rumor that it might have been shown at the Musikmesse, but there were no images at the time. This looks a bit more legit, unless of course that's just a vintage Model D being refurbished for Moogfest. :)

Update: via the Herald Sun: "A Moog Pop-Up Factory, featuring the interactive Global Synthesizer Project and assembly of Minimoog Model D synthesizers, opens in the Power Plant Gallery of the American Tobacco District."

Note the plural in "assembly of Minimoog Model D synthesizers". These are real and new. Soviet Space Child also noticed the three MINI jacks on back and the lack of an S-Trig jack on the left.

Update2: Another pic in via Soviet Space Child below. This one shows a dedicated LFO knob in the mod wheel section.

Update3: One more image of the parts spread out below and a quick video test of one being played by Gene Stopp.

Update4: Suggested price is $3499

CLICK FOR MORE »

DSI/Sequential Oberheim OB-6 Programs

"patches for consideration into the Oberheim OB-6 Factory Programs"

And a few more from on Instagram: https://www.instagram.com/peff/

This one in via Soviet Space Child.

Buchla 200/200e Outboard Integration

Published on Dec 11, 2015 peff .com

"Completely reconfigured my workstation and patch bay to interface the Buchla with outboard gear and multitrack recording. This is a test run of sorts.

lib.BE-15.121"

minimoog and strymons

Published on Nov 24, 2015 peff .com

"Minimoog noodling"