Tuesday, July 14, 2009
Bromus - Fraunhofer Lines (Korg DW-8000 demo song)
YouTube via BromusTbg
"Bromus - Fraunhofer Lines
Song recorded with Korg DW-8000 synthesizer only. All synthetic sounds came from this synth, only rythm is created from the Roland's TR-606/808 samples.
Used Stuff:
Hardware:
- Korg DW-8000
- Smallstone Phaser mk2
Software:
- Roland TR-606/808"
Robosynth DIY Wind Controllers, Robotics and More
http://robosynth.blogspot.com/See the site for more. The following is just a snip on the Mark II Wind Controller. You'll find samples on site.
"The circuit boards are housed in a wooden case made from cherry and walnut with some decorative inlays on the bottom part. The main body of the case was assembled as an octagonal assembly, but was rounded on the outside for that traditional instrument look and shape. There are three circuit board assemblies, the main board that has the processor and other active circuitry, an upper switch assembly for the fingering buttons, and a lower switch and LED assembly. The lower assembly connects to the main board before being inserted into the case. The upper switch assembly is also inserted into the case and connects to the bottom half sandwich with a small ribbon cable."
MOTM E340 Cloud Generator demos
"Final DSP code is 99% completed for the Euro rack version Cloud Generator (8 VCOs with voltage-controlled spreading, chaos and chaos bandwidth).
4 Sawtooth waves synch'd to external MOTM-310 uVCO, direct output
www.synthtech.com/demo/e340/e340_saw_sync.mp3
4 Sine waves with various modulations on all 4 CV inputs, direct output
www.synthtech.com/demo/e340/e340_sine_mod.mp3
8 sawtooths passed through a MOTM-440 VCF:
www.synthtech.com/demo/e340/e340_saw_440.mp3
4 sines modulated and sent to t.c.electronic M3000 reverb:
www.synthtech.com/demo/e340/sine_reverb.mp3
8 saws with Chaos/Chaos BW modulated then sent to MOTM-410 Triple ResonantVCF (talking robots!):
www.synthtech.com/demo/e340/e340_saw_410.mp3
MOTM-650 MIDI-CV dual arpeggiators, 8 sines with reverb/delay (t.c. FireWorx):
www.synthtech.com/demo/e340/e340_sine_seq.mp3
Paul Schreiber
Synthesis Technology"
4 Sawtooth waves synch'd to external MOTM-310 uVCO, direct output
www.synthtech.com/demo/e340/e340_saw_sync.mp3
4 Sine waves with various modulations on all 4 CV inputs, direct output
www.synthtech.com/demo/e340/e340_sine_mod.mp3
8 sawtooths passed through a MOTM-440 VCF:
www.synthtech.com/demo/e340/e340_saw_440.mp3
4 sines modulated and sent to t.c.electronic M3000 reverb:
www.synthtech.com/demo/e340/sine_reverb.mp3
8 saws with Chaos/Chaos BW modulated then sent to MOTM-410 Triple ResonantVCF (talking robots!):
www.synthtech.com/demo/e340/e340_saw_410.mp3
MOTM-650 MIDI-CV dual arpeggiators, 8 sines with reverb/delay (t.c. FireWorx):
www.synthtech.com/demo/e340/e340_sine_seq.mp3
Paul Schreiber
Synthesis Technology"
Oberheim Matrix-1000, Access Programmer and Pug
The Oberheims are currently for sale for $649 plus shipping for the pair. Contact drew at toothpastefordinner.com if interested.
via Drew
flight of harmony newsletter July 2009
"light of harmony newsletter July 2009
Greetings!
A bit late, oh well. I’ve been busy clearing out the order backlog and am almost finished (hooray!). Currently building the last of the Infernal Noise Machine preorders, and hope to be finished this week/early next week.
· I still have a few sets of INM PCBs remaining if anyone is interested. USD$666.00 + S&H.
Lead time 8-12 weeks, as I still have to finish the Quad Plague Bearers and get going on a few other things.
· Two group buys currently in the sign-up stage:
o Joysticks – It’s time again! This time, however, the purchase is of brand new joysticks from the manufacturer – not NOS (New Old Stock) units from a liquidator. Details can be found in the Muffwiggler forum thread.
o Jacks – I finally found them! I have been searching for 3.5mm mono NC-switched vertical PCB mount jacks with M6x0.5 threaded bushing since I started f(h), and finally found some with a panel-PCB height less than 15mm. They are only slightly larger in dimension to the ubiquitous Kobiconn 16PJ13x. I know that many others have also wanted this style and I am so stoked on finding these that I’m organizing a group buy at cost – USD$0.075 each (7.5¢). Details in the Muffwiggler forum thread. The MOQ (Minimum Order Quantity) has already been met.
That’s enough for now, toodles.
Any ideas, suggestions, or comments? Send them to comments at flightofharmony.com.
~flight
flight at flightofharmony.com
http://www.flightofharmony.com
Subscribe to mailing list: list at flightofharmony.com
Unsubscribe from mailing list: goaway at flightofharmony.com"
Greetings!
A bit late, oh well. I’ve been busy clearing out the order backlog and am almost finished (hooray!). Currently building the last of the Infernal Noise Machine preorders, and hope to be finished this week/early next week.
· I still have a few sets of INM PCBs remaining if anyone is interested. USD$666.00 + S&H.
Lead time 8-12 weeks, as I still have to finish the Quad Plague Bearers and get going on a few other things.
· Two group buys currently in the sign-up stage:
o Joysticks – It’s time again! This time, however, the purchase is of brand new joysticks from the manufacturer – not NOS (New Old Stock) units from a liquidator. Details can be found in the Muffwiggler forum thread.
o Jacks – I finally found them! I have been searching for 3.5mm mono NC-switched vertical PCB mount jacks with M6x0.5 threaded bushing since I started f(h), and finally found some with a panel-PCB height less than 15mm. They are only slightly larger in dimension to the ubiquitous Kobiconn 16PJ13x. I know that many others have also wanted this style and I am so stoked on finding these that I’m organizing a group buy at cost – USD$0.075 each (7.5¢). Details in the Muffwiggler forum thread. The MOQ (Minimum Order Quantity) has already been met.
That’s enough for now, toodles.
Any ideas, suggestions, or comments? Send them to comments at flightofharmony.com.
~flight
flight at flightofharmony.com
http://www.flightofharmony.com
Subscribe to mailing list: list at flightofharmony.com
Unsubscribe from mailing list: goaway at flightofharmony.com"
Minihost
"MiniHost is a powerful and full-fledged ASIO host that loads a VST
plugin (instrument or effect) and processes it in realtime.
MiniHost has been voted by the members of the KVR audio
community as the best free host of the year 2004! Details of the
KVR survey can be found here.
It offers many features that other hosts don't have, for example:
- arpeggiator, step-sequencer, CC gater, chordmaker included
- send MIDI data to VST plugins from external MIDI inputs, a resizable virtual MIDI
keyboard, the computer keyboard or MIDI files
- process live ASIO audio input or a WAV file
- record audio output to WAV (16 and 32 bit)
- browse through the presets
- powerful preset manager included, allows easy organisation of all presets
- preset randomizer with script support and mutate option
- drag n' drop support
- support for VST MIDI plugins that generate MIDI data
- much much more ..."
plugin (instrument or effect) and processes it in realtime.
MiniHost has been voted by the members of the KVR audio
community as the best free host of the year 2004! Details of the
KVR survey can be found here.
It offers many features that other hosts don't have, for example:
- arpeggiator, step-sequencer, CC gater, chordmaker included
- send MIDI data to VST plugins from external MIDI inputs, a resizable virtual MIDI
keyboard, the computer keyboard or MIDI files
- process live ASIO audio input or a WAV file
- record audio output to WAV (16 and 32 bit)
- browse through the presets
- powerful preset manager included, allows easy organisation of all presets
- preset randomizer with script support and mutate option
- drag n' drop support
- support for VST MIDI plugins that generate MIDI data
- much much more ..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
