via Ken MacBeth on Facebook
Click the pic for the gear labels.
Tuesday, April 03, 2012
Sub-Mariner
YouTube Uploaded by Ebotronix on Apr 3, 2012
"4ms Peg VcaMatrix RCD
Analogue Systems RS 100 RS 110 RS 360
ARP Odyssey 2821 Noise
Buchla System # 1
Doepfer A 143-9 A 134 pan by Moog MP 201
Flame Chord Machine
Make Noise Brains PP Maths Moddenix Optomix QMMG Wogglebug
Malekko 4x Oscillator 4x Anti Oscillator
Moog 2xFreqBox Phaser
Oberheim Sem
Roland System 104 Sequencer
The Ekdahl Moisturizer
TipTop Audio Z 8000
Toppobrillo Quantimator Sportmodulator
Master Clock Logic via Kenton Pro 2000II and 2x 4ms RCD.
Drum Logic Ultrabeat"
SNAZZY FX: ARDCORE FAC FM!!
YouTube Uploaded by snazelle on Apr 3, 2012
"A full featured FM oscilllator for the ARDCORE.
includes 1/v oct cv as well as modulation index cv"
ModuleModule Madness 01
YouTube Uploaded by djangosfire on Apr 3, 2012
"Quick and dirty patch test - audio from cam is a bit distorted - sorry.
Patched up an analog sequencer using only Eardrill modules."
Arp Odyssey mk1 2800
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
SN 28 3107. Remember, you can search on serial numbers on the site. This synth was listed back in Nov 20011 here. It looks like it's been cleaned up quite a bit since then.
via this auction
SN 28 3107. Remember, you can search on serial numbers on the site. This synth was listed back in Nov 20011 here. It looks like it's been cleaned up quite a bit since then.
Korg Mono Poly SN 470440 with Korg Case
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
sir_analog (RSS)
via this auction
sir_analog (RSS)
ANALOG SYNTH MODULAR 42HP BASIC SYSTEM MODULE
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
via the listing: "I MADE THIS SMALL RUN FOR MYSELF A WHILE BACK. IT CONTAINS THE BASIC STUFF NEEDED FOR A MONOSYNTH. I CALL IT 'THE BASICS'. IT IS 42HP WIDE. THERE IS A DASIY CHAIN IDC RIBBON CABLE THAT ALLOWS YOU TO CONNECT THIS TO (1) 16 PIN IDC SLOT ON YOUR POWER RAIL. SO YOU ONLU NEED ONE POWER LOCATION. THIS MODULE HAS EVERYTHING EXCEPT VCO'S TO MAKE A BASIC SYSTEM.
THIS IS MY BREAD AND BUTTER MODULE. I PERSONALLY USE THIS ON EVERYTHING I PATCH. I HAD THIS (1) LEFT OVER, AND IT HAS BEEN PUT AWAY BUBBLE WRAPPED FOR STORAGE.
THESE ARE THE SUB MODULES:
(1) MIDI TO CV CONVERTER---(2) PCV'S, (2) GATES, (1) TRIG OUT, (1) 5V VELOCITY, (1) 5V SLIDE, HAS ANALOG PORTAMENTO.
(1) 3 CHANNEL MIXER
(1) LM13700 BASED OTA VCA---(1) AUDIO IN, (2) CV INPUTS
(2) LINEAR ADSR GENERATORS, (1) OF THEM CAN REPEAT AND GO INTO LOOP MODE
(3) PASSIVE ATTENUATORS
(2) DUO SKEW LFO'S, (1) OF THEM HAS TIME SELECTOR AND SINE WAVE OUT.
I INCLUDE THE RIBBON CABLE AND PANEL SCREWS."
via this auctionvia the listing: "I MADE THIS SMALL RUN FOR MYSELF A WHILE BACK. IT CONTAINS THE BASIC STUFF NEEDED FOR A MONOSYNTH. I CALL IT 'THE BASICS'. IT IS 42HP WIDE. THERE IS A DASIY CHAIN IDC RIBBON CABLE THAT ALLOWS YOU TO CONNECT THIS TO (1) 16 PIN IDC SLOT ON YOUR POWER RAIL. SO YOU ONLU NEED ONE POWER LOCATION. THIS MODULE HAS EVERYTHING EXCEPT VCO'S TO MAKE A BASIC SYSTEM.
THIS IS MY BREAD AND BUTTER MODULE. I PERSONALLY USE THIS ON EVERYTHING I PATCH. I HAD THIS (1) LEFT OVER, AND IT HAS BEEN PUT AWAY BUBBLE WRAPPED FOR STORAGE.
THESE ARE THE SUB MODULES:(1) MIDI TO CV CONVERTER---(2) PCV'S, (2) GATES, (1) TRIG OUT, (1) 5V VELOCITY, (1) 5V SLIDE, HAS ANALOG PORTAMENTO.
(1) 3 CHANNEL MIXER
(1) LM13700 BASED OTA VCA---(1) AUDIO IN, (2) CV INPUTS
(2) LINEAR ADSR GENERATORS, (1) OF THEM CAN REPEAT AND GO INTO LOOP MODE
(3) PASSIVE ATTENUATORS
(2) DUO SKEW LFO'S, (1) OF THEM HAS TIME SELECTOR AND SINE WAVE OUT.
I INCLUDE THE RIBBON CABLE AND PANEL SCREWS."
Gotharman's MiniProphet - Sequential Pro One Clone For Sale
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
You'll find a video at the auction and previously posted here.
"Gotharman's MiniProphet, Sequential Pro One clone up for sale. Only 2 have been built, so don't miss out on you chance to get this one. More info and video can be found on the GotharMusic website. NOTE: This model will only work on MIDI channel 2. It has no MIDI channel selector.
Differences from the original Pro One:
-Build in MIDI to CV/gate interface
-An extra filter is added, made with a CEM3328 chip, plucked from a defective Ensoniq Mirage
-An extra LFO is added
-Levels can be adjusted separately for each oscillator waveform, instead of only on/off switching
-FM can be adjusted separately for OSC A and the filters - FM waveforms can be selected
-Analogue feedback is added
-Lacks the keyboard and sequencer
-IT IS NEW!
Specs:
-Completely analogue - no memory!
-Monophonic
-Build in MIDI interface that receives note on/off, velocity, pitchbender and modulation wheel data. Filter cutoff can be controlled by mod wheel or velocity.
-2 VCO's with sawtooth, triangle and square waveforms, pwm, sync and FM.
-2 filters, both LPF, one original Pro One filter and one Ensoniq Mirage filter. Has filter FM (Fxm). The outputs of the 2 filters are phase inversed to each other, to make it possible to do BPF effects.
-2 ADSR envelopes.
-2 LFO's
-Analogue feedback.
-Portamento.
-Power: 230Vac.
-Connections:
-MIDI in
-Audio out"
via this auction
You'll find a video at the auction and previously posted here.
"Gotharman's MiniProphet, Sequential Pro One clone up for sale. Only 2 have been built, so don't miss out on you chance to get this one. More info and video can be found on the GotharMusic website. NOTE: This model will only work on MIDI channel 2. It has no MIDI channel selector.
Differences from the original Pro One:
-Build in MIDI to CV/gate interface
-An extra filter is added, made with a CEM3328 chip, plucked from a defective Ensoniq Mirage
-An extra LFO is added
-Levels can be adjusted separately for each oscillator waveform, instead of only on/off switching
-FM can be adjusted separately for OSC A and the filters - FM waveforms can be selected
-Analogue feedback is added
-Lacks the keyboard and sequencer
-IT IS NEW!
Specs:
-Completely analogue - no memory!
-Monophonic
-Build in MIDI interface that receives note on/off, velocity, pitchbender and modulation wheel data. Filter cutoff can be controlled by mod wheel or velocity.
-2 VCO's with sawtooth, triangle and square waveforms, pwm, sync and FM.
-2 filters, both LPF, one original Pro One filter and one Ensoniq Mirage filter. Has filter FM (Fxm). The outputs of the 2 filters are phase inversed to each other, to make it possible to do BPF effects.
-2 ADSR envelopes.
-2 LFO's
-Analogue feedback.
-Portamento.
-Power: 230Vac.
-Connections:
-MIDI in
-Audio out"
Buchla 200e System for Sale
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"List of modules
201e-12 Powered Cabinet
223e Tactile Input Port
225e MIDI Decoder / Preset Manager
259e Twisted Waveform Generator
261e Complex Waveform Generator
266e Source of Uncertainty
281e Quad Function Generator
285e Frequency Shifter / Balanced Modulator
291e Triple Morphing Filter
292e Quad Dynamics Manager"
via this auction
"List of modules
201e-12 Powered Cabinet
223e Tactile Input Port
225e MIDI Decoder / Preset Manager
259e Twisted Waveform Generator
261e Complex Waveform Generator
266e Source of Uncertainty
281e Quad Function Generator
285e Frequency Shifter / Balanced Modulator
291e Triple Morphing Filter
292e Quad Dynamics Manager"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
