MATRIXSYNTH


Sunday, July 08, 2012

VACO LOCO ZIRA

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

"The 7-Bit Sound NAND Drone Synth is ballistic Lo-Fi synth box that packs a heavy punch, with 4 internal gated oscillators

NAND Drone synth is easy to use and is controlled in the following ways:

· The First knob controls oscillation frequency of the number 1 oscillator that is gated to the number 2 oscillator

· The Second knob controls oscillation frequency, by turning the First switch we open or close the gate.

· The Third knob controls oscillation frequency of number 3 oscillator that is gated to number 4 output oscillator which is also gated to the number 2 oscillator

· The second switch controls the gate between number 3 and number 4 oscillator.

The Vaco Loco Zira came out of an idea to see how small a fully equipped and versatile synth could be built.

The Zira features Two oscillators, each with 48 waveforms that were favourites from the Monowave. A sub oscillator, linked to oscillator one. The Sub oscillator has a level control, oscillators one and two can be switched on or off. Note offset for Patch +/- two octaves, second oscillator has note detune of +/- two octaves and fine tune. Hard Sync of oscillator two to oscillator one's pitch.

The Zira is based on the Korg NJM2069AD Filter/VCA chip. This 4-pole low pass filter is the same filter chip used in the Poly800, DW8000, DW6000 and DSS-1

Zira comes fully assembled in a clear acrylic housing, and is a very limited edition release, never to be seen again once stocks are sold out.

Features:
· Two oscillators, each with 48 waveforms
· One Sub oscillator
· Hard Sync of oscillators
· Two ADSRs, one VCF, one VCA
· One LFO
· Multiple routing options
· 64 patch memories
· MIDI updatable firmware

Specifications:
· 2 Oscs: Each with 48 waveforms, I picked 48 of my favourites from the Monowave. A sub oscillator, linked to oscillator one. The Sub oscillator has a level control, oscillators one and two can be switched on or off.

Note offset for Patch +/- two octaves, second oscillator has note detune of +/- two octaves and fine tune.

Hard Sync of oscillator two to oscillator one's pitch.

· VCF: The Korg NJM2069AD is used in the prototypes for the filter. This 4-pole low pass filter is the same filter chip used in the Poly800, DW8000, DW6000 and DSS-1

· VCA: Very high signal to noise ratio and incredibly clean sounding, again, the prototype uses the NJM2069AD.

· EG's: One for Filter and one for VCA, both are ADSR type. They have Linear attack and exponential decay and release curves.

These go from very quick (~3mS) to a many seconds for each stage (~48 Seconds).

· LFO: The LFO has 4 wave forms, Sinewave, sawtooth, square and random. the LFO is routable to oscillator pitch, filter cut off and filter resonance.

A delay parameter allows the LFO to come "fade in" with an adjustable delay.

It also has a key sync mode, when on the LFO is forced to reset when a new key is pressed and when the LFO cycle has finished it rests at that value.

· Display: The display uses four 7 segment displays, the same as GorF and Tron.

· MIDI: MIDI CC for each parameter, receipt of Patch change (64 patches).

· I/O: The Connections could not be simpler, power in (6 to 12V DC), MIDI in and Audio out.

Video Demos:"


YouTube Published on Apr 16, 2012 by VacolocoSynth

"A quick run through of Zira and it's features."

Zira Demonstration

Published on Apr 16, 2012 by VacolocoSynth

"A quick run through of Zira and it's features."

New Boot Loader

Uploaded by VacolocoSynth on Feb 23, 2012

"Quick demonstration of the new, faster and more reliable, boot loader. This demo shows an update for Zira, but the same boot loader will be used for all new projects from this point forward."

Review of Novation's Ultranova Hardware Synth and Software Editor


YouTube Published on Jun 1, 2012 by producertech

"Novation Ultranova Review

This movie outlines the main features of Novation's latest synth Ultranova. There is a guide to the hardware and main controls and i/o, as well as an introduction to the software editor, showing how various sound design and performance techniques can be carried out."

Guide to Reason Rack Extensions Part 1 - Korg Polysix


YouTube Published on Jul 8, 2012 by producertech

"Review of Korg Polysix Rack Extension for Reason

This movie is the first of a series of mini tutorials, exploring the range of instruments and effects available in Reason's new Rack Extensions feature. Korg's Polysix is the first instrument made by an external manufacturer to be included in Reason, so this is an exciting development! The movie takes you on a brief tour of the instrument, giving an outline of its controls and synth engine.

For more information about Reason, check out: http://www.reasoncourses.com"

Buchla 400


flickr set By kbr111
(click for more)

Update via Don Garbutt in the comments: "I worked on this model at IRCAM in the early '80s. It kept overheating, so they flew Don Buchla to Paris to turn a fan screw with a screwdriver!"

BubBrand's Live Modular Setup


via BugBrandBlog

"For the live stuff I've generally been taking a master clock from the TR606 (via UTLX, top right).

This clock is then used to drive Seqs, Divs, etc. and these derived clocks hook onwards into a Tama twin-drum module and generate events within the modular.

So, the top frame is mainly Clocking.

The middle frame is a variety of different things (think I will lose the clocking modules in the middle of this frame) - inc. new CTL1 Touch Panel version (the green)
& the bottom is mostly the synthesis - several SYN2B Quadrature Sine Oscillators for FM goodness.

Lots of power, but relatively compact and portable."

Acidlab MIAMI Listening Test


YouTube Published on Jul 8, 2012 by AudioCentralMagazine

"a quick (and probably boring) listening test of Acidlab.de MIAMI - analog clone of T-808"

Update:

fun with Acidlab MIAMI & heavy distortion

Published on Jul 8, 2012 by AudioCentralMagazine

"Nothing more than fiddling with a heavy & nasty distortion unit on the delicious Acidlab.de MIAMI 808 clone. I am very flabbergasted of interaction between kick decay and (heavy) distortion. In my memories, this reminds me some very very great album of Pankow - an italian electronic duo that i liked a lot. Hats off to Pankow (and Acidlab, obviously)."

RichyHo's Rack Planner - Video #1


YouTube Published on Jul 8, 2012 by RichyHo
Update: You might want to skip to the updated Video #2 below.

"An overview of the features and functionality of my multi-format modular synthesizer rack planner (as at v. 1.12 - currently a work-in-progress and not yet released). I forgot to demo dragging modules between racks (they retain their patched commections) and 'dynamic bolts' (but if you watch carefully in the euro rack you might see bolts appear/disappear as modules are dragged around). Comments and suggestions are welcomed - either here or on the thread at Muffs Forum where you'll find much more info about the project and better quality pictures...http://www.muffwiggler.com/forum/viewtopic.php?t=61984&start=all
Thanks for watching."

RichyHo's Rack Planner - Video #2

YouTube Published on Jul 9, 2012 by RichyHo

"Best watched in full screen, HD. A better quality video demonstrating the main features of my current development project - RichyHo's Rack Planner. Now at version 1.13 (not available for a while yet!) it's a modular synthesizer rack layout planner and patch notation system. Comments welcome. Thanks for watching."

Patch Archives: Pro-One Bon Voyage Bass


YouTube Published on Jul 8, 2012 by MusicGearNuts

"Music Gear Nuts brings you the 'Patch Archives'. What better way to remember memory-less gear settings than by recording a video, with audio demos and patch pictures!

In this episode we have one of the classic analogue bass monsters, a Sequential Circuits 'Pro-One'. The patch settings attempt to re-create the deep droning bass line from 'Air Frog - Bon Voyage' on the Svek label (SK043, 2000).

Don't forget to tune your Pro-One according to the manual if you attempt the same patch settings. Otherwise, just use your ears and have fun!

Thanks go out to the Stockholm crew for your percussion!"

via Gregory Jack Hammer on The MATRIXSYNTH Lounge

Toppobrillo Mixiplexer, demo proto


YouTube Published on Jul 8, 2012 by toppobrillo

"made a panel, threw in case, patched quickly, recorded this!"

MakeNoise René - 1st Power-On


YouTube Published on Jul 7, 2012 by kuxaansum

"Just plugged in my René.
Have not read the manual yet.
Figure I would see what I could do without knowing what I was doing...
~Cogito Ergo Sum

A-145 LFO providing clock to RCD/SCM plus multed to various portions of René.
QCV to SubCon Model 15 w/ xgate to A143-1. 2nd CV to Modcan FMVDO w/ ygate to Envelator. Modcan filtered by MFB 24db and M15 running through MA ma35.
Too much other modulation happening from previous patch but will try again after I RTFM."

Descartes Teknoise

Published on Jul 8, 2012 by kuxaansum

"Cartesian Techno?
No idea how to use René so I thought I would let coordinates speak for themselves..."

Update:

Slow Mods

Published on Jul 8, 2012 by kuxaansum

"SubCon Model 15 and Modcan FMVDO quantized and modulated (Z8000, uLFO, Model 37 and ViLFO) through MA35 VCF/A and MFB 24dB VCF & loped via A-143-1 and Envelator."
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH