via this auction
Wednesday, August 15, 2012
E-MU EMULATOR III
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"MINT CONDITION E-MU EMULATOR III 3 SAMPLER (16 BIT SP1200) SYNTHESIZER KEYBOARD WITH HARDCASE. The E3 works 100% to best of my capability to test (It powers up and plays patches in the banks) and is sold as is with no returns. I believe it is a 4 MB version with the last 2.42 firmware according to the boot record. Used in a smoke-less private studio."
via this auction
"MINT CONDITION E-MU EMULATOR III 3 SAMPLER (16 BIT SP1200) SYNTHESIZER KEYBOARD WITH HARDCASE. The E3 works 100% to best of my capability to test (It powers up and plays patches in the banks) and is sold as is with no returns. I believe it is a 4 MB version with the last 2.42 firmware according to the boot record. Used in a smoke-less private studio."
Chamber of Sounds RAYGUN DLX - featuring Dimitri Manos
YouTube Published on Aug 15, 2012 by chamberofsounds
"RAYGUN DLX is a brand new COS box, meant to simulate to rayguns, sirens and other toy sounds, enjoyed by noise enthusiasts. Now you can plug straight into the amp, instead of using a mic, and tweak out the sounds even further with the photocell or pitch knob. This video features Dimitri Manos of Dr. Dog, for whom it was designed for. Get your noise on @ chamberofsounds.com"
Liquid HiHat V1 4 demo 2
YouTube Published on Aug 15, 2012 by Richarius Molindarius
Hi boys and girl! It's Unkle Ryk. Lol.
During a couple of hours of listening to the 2 voices in my Liquid HiHat whilst building another module, I kept fiddling with things through the patch during the build. About 15 minutes or so before I shot the video, I realized there were no CVs controlling the pitches of the voices! DUH! Lol. Within minutes of hooking up extra cables to do that, the 'beat' that I had already thought bizarre but liked, got even better and I thought - worth shooting a video of as another demo of the LHH V1.4. So here y'are kids! :D
Hope you enjoy. :) Full sorta, explanation of the patch, in the video. :)"
Hex Inverter Liquid HiHat: http://shop.hexinverter.net/
Cwejman S1 Acidic Bass
YouTube Published on Aug 15, 2012 by Joey Blush
"Patch of the day Aug 15, 2012 -
Bass: Cwejman S1 sequenced by Make Noise Pressure Points
Kick: Blue Lantern Asteroid BD
Snare: Harvestman Piston Honda + Make Noise Echophon
Hats: Modcan FMVDO
Clock: Ableton Live 8, 120 BPM, 4ms RCD, Kenton USB Solo
Got the portrait orientation right this time... now to figure out how to get a proper audio recording with the video!"
Review: Magellan
YouTube Published on Aug 15, 2012 by Discchord
"Yonac have unleashed an astonishingly powerful synth, with features that will be welcomed by both new and experienced users. Visit the site for more Music App News, Reviews & Tutorials: http://discchord.com
It is available now on iTunes: http://bit.ly/R2UoRO (If you use my link I get a cut. Thanks!)"
Retronyms Releases Tabletop 1.6 & CloudSeeder Source Code
"Retronyms have released Tabletop 1.6. In addition to the stability and performance upgrades, 1.6 has two really cool new devices:Magic Mic - an input recording module that allows for recording vocals or any other audio not immediately available in the app. Continuously record layers over the same loop and monitor the input live.
T-Pain Pitch-Correction Effect - using iZotope technology this effect automatically corrects the pitch of incoming vocals. Allow any note to pass or set the effect to only allow the major or minor scale of a particular key.
The Magic Mic is included for free with the update, and the T-Pain Effect is available for $5.99 as an in-app purchase. In conjunction with the release, Retronyms are holding a contest to see who can create the best track using the Magic Mic. The winner of which will receive a free year-long SoundCloud Pro membership!"
iTunes:
Tabletop - Retronyms
iPads on eBay
"Retronyms have also released the source code for CloudSeeder, the SoundCloud-powered in-app community. Everything a dev needs to know to get it installed is here: https://code.google.com/p/cloudseeder/"
Synth Kid with a Salamander Systems Modular
via Damir K Rogina on Emu Systems Modular Synthesizer Facebook.
"I got another modular few days ago... SMS salamander modular system ....
in huge pile of modules I got 4 dual VCOS based on EMU sub modules... KINDA LIKE SUPER EMU VCOS .. and 2 dual UAF modules based on EMU UAF submodules..... KILLER system"
WMD Gamma Wave Source Eurorack module
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is a used WMD Gamma Wave Source eurorack synth module. The module works fine. I've only had it a couple of months in a smoke-free, dust free studio environment. I am selling it because I need the money. My loss, your gain. Information about this module (from the WMD website):
The WMD Gamma Wave Source is a dual digital wavetable VCO that can create millions of timbres using onboard digital "effects".
The Controls
1V/Oct - Pitch input, used with standard 1 Volt per Octave keyboards and MIDI-CV converters. 0-5 volt input.
Pitch 1 & 2 - Controls the relative pitch per channel.
WT 1 & 2 Select - Select the desired wave table from the chart. 256 are available, each producing a different sound. Click for the table chart.
Out 1 & 2- Oscilator section output, each puts out +-2.5V/ 5Vpp signal.
The Effects Section
The GWS has four effects pipelines. Two for each oscilator. The Routing table selects how the oscillators interact with the effects pipelines.
FX Select Knob - Pushing this knob in will select the column that the knob is adjusting. Turning it will adjust the LEDs in the select column and will alter the Routing or Effects selection.
FX Para 1 & 2 - These knobs control the FX parameter for the oscillator section. Each effect has a specific parameter that is controlled by this knob. Adujust to taste.
Para CV & Attenuation Knob - This is a CV input for modulating and controlling the effects on the oscillator. Press the WaveTable Select knob to activate CV control per oscillator section. The LED will light when CV control is active. The FX Para knob will adjust the center or edges of the CV control depending on the selected effect.
Effects Table - These are the available effects, they are all created mathematically using 8 bit processing. The result is generally lo-fi and edgy, but smooth fat sounds are also possible.
LPF - Digital low pass filter, mellows out tone
HPF - Digital high pass filter, removes lows for brighter tone
Sharpen - Similar to HPF, but more aggressive
Bit Depth - Reduces vertical fidelity of signal
Bit Flip - Collapses signal in on itself, adds harmonics
Sample Rate - Reduces horizontal fidelity of signal
Sample Kill - Kills samples at a rate set by Para knob.
Sample Polarity - Inverts the signal at a rate set by Para knob
A+B - Adds the OSC1 and OSC2 wave tables and outputs
A-B - Subtracts the OSC1 and OSC2 wave tables and outputs
via this auction"This is a used WMD Gamma Wave Source eurorack synth module. The module works fine. I've only had it a couple of months in a smoke-free, dust free studio environment. I am selling it because I need the money. My loss, your gain. Information about this module (from the WMD website):
The WMD Gamma Wave Source is a dual digital wavetable VCO that can create millions of timbres using onboard digital "effects".
The Controls
1V/Oct - Pitch input, used with standard 1 Volt per Octave keyboards and MIDI-CV converters. 0-5 volt input.
Pitch 1 & 2 - Controls the relative pitch per channel.
WT 1 & 2 Select - Select the desired wave table from the chart. 256 are available, each producing a different sound. Click for the table chart.
Out 1 & 2- Oscilator section output, each puts out +-2.5V/ 5Vpp signal.
The Effects Section
The GWS has four effects pipelines. Two for each oscilator. The Routing table selects how the oscillators interact with the effects pipelines.
FX Select Knob - Pushing this knob in will select the column that the knob is adjusting. Turning it will adjust the LEDs in the select column and will alter the Routing or Effects selection.
FX Para 1 & 2 - These knobs control the FX parameter for the oscillator section. Each effect has a specific parameter that is controlled by this knob. Adujust to taste.
Para CV & Attenuation Knob - This is a CV input for modulating and controlling the effects on the oscillator. Press the WaveTable Select knob to activate CV control per oscillator section. The LED will light when CV control is active. The FX Para knob will adjust the center or edges of the CV control depending on the selected effect.
Effects Table - These are the available effects, they are all created mathematically using 8 bit processing. The result is generally lo-fi and edgy, but smooth fat sounds are also possible.
LPF - Digital low pass filter, mellows out tone
HPF - Digital high pass filter, removes lows for brighter tone
Sharpen - Similar to HPF, but more aggressive
Bit Depth - Reduces vertical fidelity of signal
Bit Flip - Collapses signal in on itself, adds harmonics
Sample Rate - Reduces horizontal fidelity of signal
Sample Kill - Kills samples at a rate set by Para knob.
Sample Polarity - Inverts the signal at a rate set by Para knob
A+B - Adds the OSC1 and OSC2 wave tables and outputs
A-B - Subtracts the OSC1 and OSC2 wave tables and outputs
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
