Thursday, October 31, 2013
Blood of my blood (excerpt)
This one in via Todd Barton
"A track from my 1983 score for the stage production of Dracula. Scored for two sting quartets (the KRONOS Quartet), JP-8 synthesizer, Roland MC-202, Wulitzer electric piano, waterphone and grand pianos.
This is an excerpt from a 12 minute piece.
For the synthgeeks, the multiple MC-202 sequences were tape-synced and all JP-8 tracks were individually performed onto an old Tascam 1/2" eight track tape deck."
Be sure to see the Halloween channel below for more Halloween posts.
"Pumpkin Muffins" - Clavia Nord Modular G1
Published on Oct 31, 2013 Time Synth Project·48 videos
"All sounds come from the Clavia Nord Modular G1 keyboard. A little bit of chorus plate effect from Lexicon MX300.
All polymeters in multiples of 7. Selecting between sequences in each slot A-D, with 3:7, 4:7, 5:7, 6:7 variations for polyrhythmic phrasing over the base sequence tempo of 60 bpm.
Hope you enjoy, Happy Halloween!"
See the Halloween channel below for more!
Halloween - Roland D50
"Happy Halloween from RetroSound.de
all sounds: Roland D50"
via Marko on The MATRIXSYNTH Lounge
See the Halloween channel below for more spooky posts!
Holocaust 3000 Halloween Track
via Paul Lawler on The MATRIXSYNTH Lounge:
"This spooky track is 100% analogue using an Arp 2600, Minibrute, VCS3, Modular, Monotron Delay, MS20 etc etc:) http://paullawler.bandcamp.com/track/holocaust-3000"
See the Halloween channel below for more!
SH3ALLOWEEN
"A little S/H jam on the Roland SH3a going through the gated reverb of a Yamaha REX50. This was just done for Matrixsynth's Halloween special."
via Alan Currall on The MATRIXSYNTH Lounge
See the Halloween channel below for all Halloween posts!
Dicte Le Docte Rythme À L'Autodidacte 31 Octobre 2013
"Composition Live at home for Haloween or allo wind by ERT aka +ert+ lias Eric TROCHU"
via Eric Trochu on The MATRIXSYNTH Lounge
See the Halloween channel below for more.
Touch MIDI Controller Prototype
Published on Oct 30, 2013 Yann Seznec·42 videos
"A prototype of a capacitive touch sensing USB MIDI controller.
Using copper tape, a bunch of 1Mohm resistors, and a Teensy++ controller board."
New Yann Seznec channel for this one.
"A prototype of a capacitive touch sensing USB MIDI controller.
Using copper tape, a bunch of 1Mohm resistors, and a Teensy++ controller board."
New Yann Seznec channel for this one.
Yamaha VL-1 Virtual Acoustic Synthesizer SN KHO1401
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Yamaha VL-1 Virtual Acoustic Synthesizer very rare and in very good condition. It sounds great for realistic woodwind/brass/orchestral sounds. It is fully functional (including mod wheel and controller) but the LCD has lines across it. (check last picture) You can still read it, but the lines jitter a little."
via this auction
"Yamaha VL-1 Virtual Acoustic Synthesizer very rare and in very good condition. It sounds great for realistic woodwind/brass/orchestral sounds. It is fully functional (including mod wheel and controller) but the LCD has lines across it. (check last picture) You can still read it, but the lines jitter a little."
Alesis Andromeda A6 Synthesizer
Analogue Solutions Vostok
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Full Spec:
All circuits are totally analogue with the exception of the MIDI interface. This is the Version 2 Vostok with 3 analog oscillators and new metal case!
484 Matrix patch panel points / 69 Sockets / 52 Rotary controls / 13 LEDs / 20 Switches / 2 Displays
Dimensions
Dimensions shown do not include feet/handles/catches/corners pieces.
Complete closed case: 274 (H) x 440 (W) x 188 (D)
Weight: 19 pounds with lid on.
Lid depth: internal 50mm (enough to leave in patch leads). External 134mm
Control Modules
MIDI to CV Converter
CV1 (pitch) / CV2 (controller) / Gate / Accent / Legato, MIDI Thru, channel select, manual trigger
Joystick
2 way joystick controller
Sequencer
8 step CV & Gate analogue sequencer, range switch, manual step
Audio Modules
VCO1: Saw / Square / Tri waves, Glide, Sync
VCO2: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
VCO3: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
Noise: White noise source
Voltage Controlled Multimode Filter
2 Filters based on Korg MS20 circuitry. Independent Cut Off and Resonance for Low Pass Filters and High Pass Filters. The VCLPF and VCHPF combine to produce a 3rd filter type, Band Pass
via this auction
"Full Spec:
All circuits are totally analogue with the exception of the MIDI interface. This is the Version 2 Vostok with 3 analog oscillators and new metal case!
484 Matrix patch panel points / 69 Sockets / 52 Rotary controls / 13 LEDs / 20 Switches / 2 Displays
Dimensions
Dimensions shown do not include feet/handles/catches/corners pieces.
Complete closed case: 274 (H) x 440 (W) x 188 (D)
Weight: 19 pounds with lid on.
Lid depth: internal 50mm (enough to leave in patch leads). External 134mm
Control Modules
MIDI to CV Converter
CV1 (pitch) / CV2 (controller) / Gate / Accent / Legato, MIDI Thru, channel select, manual trigger
Joystick
2 way joystick controller
Sequencer
8 step CV & Gate analogue sequencer, range switch, manual step
Audio Modules
VCO1: Saw / Square / Tri waves, Glide, Sync
VCO2: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
VCO3: Saw / Square waves, Pulse Width, Glide, Sync, Sub outs
Noise: White noise source
Voltage Controlled Multimode Filter
2 Filters based on Korg MS20 circuitry. Independent Cut Off and Resonance for Low Pass Filters and High Pass Filters. The VCLPF and VCHPF combine to produce a 3rd filter type, Band Pass
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH


































