A Little Play With ADM15 Spectre...

Published on Dec 16, 2015 Audio Damage, Inc.

"Just having a bit of fun with Spectre. It is in the lower-left-hand corner of the Euro case. In the first half of the video, I'm manually triggering it. In the second, I just mult the snare trigger. It is in Infinite Mode in this demonstration, and I switch back and forth between bin shift and pitch shift.

Kick and snare are 2 x ADM12 Neuron + ADM07 Mad Hatter, driven by ADM06 Sequencer 1. The delay I occasionally play with (directly to the right of Spectre, with the same panel config) is an alpha version of a clocked delay we are working on. Synth stuff is from WMD/SSF set."

Roland Boutique JP-08 Demo - Discovery One - By PolyEvolver

"Hi Folks, I made this track to demo the new Roland Boutique Jupiter JP-08 Synthesizer. All but the 1 Acoustic Guitar track (NI Strummed Acoustic), The Piano ( Roland FA06) and Drums (LPX Drummer), are sounds straight from eh JP-08 or That I made on it, nothing more. I felt this track required the extras like guitar and piano but what you get here is a diverse range of sounds and feel for the instrument. There's 14 tracks of Jupiter in there so plenty to pick out, enjoy."

Fully Restored ARP 2600 & 3604P With Aftertouch

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Here is a list of the work that was done on this synthesizer:


ARP 3604 Keyboard:
All old rubber Pratt-Read key bushings were replaced with new bushings
Sample and hold capacitors replaced with WIMA capacitors
CV memory opamp replaced
Aftertouch sensor added to keyboard
Keyboard Bus bars (3 total) replaced with new ones
Keyboard leveled, lubed, calibrated
New tolex and hardware
Cinch Jones connector replaced with 8-Pin DIN

ARP 2600
Case stripped, repaired, re-tolexed
All case hardware, latches, handles, rubber feet, screws, corners, finish washers replaced
Recessed 8-Pin DIN jack added
Aftertouch circuit (0-10V, 10V=Maximum aftertouch pressure) added
Old power supply removed and replaced with a Power One linear supply (Much nicer than original)
All tantalum capacitors replaced with new tantalum capacitors
All polarized capacitors replaced
Opamps in audio signal path upgraded
Reverb driver circuit completely rebuilt down to the resistors (Now it is dead quiet even when driving the reverb tank at 100%)
Reverb tank replaced with 17" Accutronics reverb tank.
Original 4019 VCA module replaced with modern clone (NEA4019) which uses very high quality matched SSM2220 and SSM2212 transistors as well as a Burr-Brown output opamp.
Power indicator lamp replaced
Unit fully calibrated

CLICK FOR MORE »

TECHNICS SY 1010 Vintage Japanese Analog Mono Synthesizer SN CA7 J25A 050

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

The CAT by Octave model 1853 SN A1029

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This item is all original and is in great condition. It is missing one knob on the far left-hand side on the bottom other than that it is in great shape the serial number is a1029"

CLICK FOR MORE »

SOLID OAK DUAL ROLAND BOUTIQUE TIER STAND

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Skull in the O ROLAND JX-8P & PG-800 Programmer & Memory Cart

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

TWISTED Head Eurorack Modular Synth Case

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Modular Eurorack case built from various available materials. Pictured is the available from stock in moisture resistant MDF. So when you spill your coffee over the rack at least the case will survive. Built to accommodate Doepfers A100 DIY 84hp kit which fits perfectly. Modules or DIY kit not included. Flat packed and shipped from the UK worldwide. Will need to be constructed and glued. All holes drilled. Other sizes available to order."

CLICK FOR MORE »

Thumbs

Thumbs from mudlogger on Vimeo.

"Buchla 200e live improvisation"

Telharmonic Drone 01

Published on Dec 16, 2015 Matthew Shaw

"Make Noise Telharmonic drone.
Telharmonic tonic set to a low tuning, Centroid set fully counter clockwise and modulated with a slow cycling envelope from a Intellijel Quadra. HLock modulated by a random burst clock from a Wogglebug. Telharmonic out sent to MMG and cutoff modulated by a slow QPLFO"