MATRIXSYNTH

Phil's Rev2 Jam-torials with the Sequential Rev2

Published on Mar 20, 2019 Phil's Rev2 Jam-torials

Playlist:

1. Episode 1: Some Percussive Exploration on the Prophet Rev2

Foolin around with some percussive patching on the Rev2.

CLICK FOR MORE »

Roland Jupiter-Xm Has An Artificial Intelligence Arpeggiator

Published on Nov 27, 2019 Perfect Circuit

"Artificial Intelligence has finally made its way into synthesizers! The Jupiter-Xm has an AI based I-Arpeggiator that creates whole songs while you play.

It also has a polyphonic five part multitimbral synthesizer engine which can emulate the sounds of many classic Roland analog and digital synthesizers as well as electric pianos and drum machines. The synth engines include the SH-101, Juno 106 and Jupiter 8, as far as drum machines go all of the classics are covered from the CR-78 to TR-808 and TR-909.

Jupiter-Xm available here: https://www.perfectcircuit.com/roland...

#PerfectCircuit #JupiterXM #Synthesizer"

Jean-Michel Jarre - About Eōn

Published on Nov 27, 2019 jeanmicheljarre

Jean-Michel Jarre talkes about Eōn.

Choose your music service to listen to Jean Michel Jarre: https://jean-michel-jarre.lnk.to/JMJ

More from Jean-Michel Jarre: https://jeanmicheljarre.com/

You can find additional posts featuring Jean-Michel Jarre's Eōn here.

Gotharman's LD3: Percussion 3

Published on Nov 27, 2019 gotharman

"3 more Percussion Synthesizer presets, to become available together with the forthcoming LD3/Tiny LD update.
www.gotharman.dk"

PPG wave 2.2 Wavetable Synthesizer (1982) Blue Motion

Published on Nov 27, 2019 RetroSound

"(c) 2019 vintage synthesizer demo by RetroSound
supported by UVI: http://bit.ly/retrosound-uvi

all synthesizer sounds: #PPG #wave 2.2 Wavetable #Synthesizer (1982)
drums: E-MU-Emax Sampling Synthesizer (1986)
voice samples: E-Mu Emax (1986)
recording: multi-track"

New DNIPRO DOT polyrhythm sequencer

Published on Nov 27, 2019 DNIPRO MODULAR

"INTRODUCTION of a 3-channel eurorack trigger sequencer DOT. Two DOTS are linked together and control analog bassdrum and hi hets from q&d by Andrii Kuzmenko with Plaits and Peaks from Mutable Instruments.
Create rhythms on a fly and creatively vary them."

"3 channels pattern generator

Dot is handy feature-packed tool for generating and managing rhythmic triggers in your system. It can fire drums, generate variable pulses, divide clocks, create polyrhythms on a fly with several twist of a knob or with deep, careful pattern programming. Both generative and manual program techniques can be combined, f.e. you can create pattern with euclidian algorithm and then edit it in xox style or shift it with cv inputs to a new levels of variety.

Despite of its slim form factor, DOT has 3 channels of patterns on a board and can be extended with additional DOTs, that can be chained together.

General features:

3 channels trigger sequencer in 6 hp

euclidian pattern generators and XOX step programing

real time manual recording

3 routable bi-polar cv inputs

ability to save and load patterns

programmable ratchets

swing

flip-able interface

stable clocking with ultra low latency

several modules can be chained to share clock and reset

Technical details
6 hp
120 mA +12V
20A -12V
0 mA 5V
42 mm deep
4mS, 4.5v triggers"

ADDAC215 Dual S&H+ Basic Introduction

Published on Nov 27, 2019 ADDAC System

You can find details on the ADDAC215 here.

"This new module should not be judged by it’s size, at 6hp it’s packed with features.

At it’s core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it’s own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there’s also 4 extra outputs: Noise, Difference, Average and Sum. The [Noise] output is coming from the noise source, the [Difference] output is the subtraction of section A minus section B, the [Average] output is the sum of both A plus B and then divided by 2 and finally the [Sum] output is the sum of both A plus B sections.

This module will also be available as a full DIY kit."

ADDAC215 Dual S&H+ Extra Outputs

Published on Nov 27, 2019 ADDAC System

KORG 800 DV w/ Original Beige / Brown Dust Cover

Note: Auction links are affiliate links for which the site may be compensated.

This one was spotted and sent in via M Me.

KORG 800DV branded dust cover pictured below. This is the first post to feature one. :)

CLICK FOR MORE »

Custom Moog Model 12 Vintage Modular Synthesizer w/ SNs 1016 & 7589

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is from an estate sale, on consignment in our store. It is a Moog Model 12 custom build. 1 owner. We do not have the lids. It works, and comes with a keyboard. We are not experts on these older synths but it does turn on and we were able to play some basic patches with it...however, it will need serviced in order to be at it's best. These machines are old and rare and this one is in very good condition cosmetically. Once it is serviced fully, this will be an awesome piece of history and a mammoth sounding all analog synth. Please feel free to ask questions. I will be doing a bit more research myself and will keep this listing updated."

CLICK FOR MORE »