Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Friday, January 31, 2020
MFB Dominion Club Desktop Sequencer
Sequential Circuits Prophet VS Rackmount SN 0244
See dealers on the right for pricing and availability on gear.
LABELS/MORE: Auctions, Sequential Circuits
LABELS/MORE: Auctions, Sequential Circuits
Roland Jupiter-6 SN 322506
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The Jupiter 6 is a fantastic analog polysynth that's a little bit of an underdog compared to its siblings the 4 and the 8! However, it is very powerful and is likely overlooked due to the immense fame of the others. Its a dual VCO 6 voice with cross mod capabilities, sync, and triangle, square and saw waveforms. The filter section includes standard low pass but also band pass and high pass operation. The filter envelope routing is not preset so envelope 1, 2, or both can be assigned to control the it! The LFO section is fully featured including a random output and onset delay. Of course there is full preset saving and plenty of performance oriented controls. The one downside is that it does not include chorus or ensemble like many of the other Roland polys! It does have the coolest color scheme and those futuristic aluminum sides though. The external analog ins include arpeggiator clock in, patch shift, pedal hold and CV for the VCA and VCF. Of course it has MIDI as well so there is tons of interfacing available.
This synth is in great working condition and was just serviced by our in house technician. The panel assembly, bender and keybed were refurbished, faders and jacks were resoldered, the master tune pot was replaced, and a standard IEC connector was installed. The replaced master tune pot does not fit the original knob due to lack of an old stock part to replace it with. We will include the original knob with the sale. Cosmetically the synth is looking good but has some wear on the back and a taped on note of the I/O fused to the top corner. The keys are in great shape and are very white. One of the fader caps in the envelope section is significantly more yellow than the others and of course there is the replaced tune knob. All buttons are functioning fine and it sounds incredible as usual!"
SN 322506 was previously listed here.
via this auction
"The Jupiter 6 is a fantastic analog polysynth that's a little bit of an underdog compared to its siblings the 4 and the 8! However, it is very powerful and is likely overlooked due to the immense fame of the others. Its a dual VCO 6 voice with cross mod capabilities, sync, and triangle, square and saw waveforms. The filter section includes standard low pass but also band pass and high pass operation. The filter envelope routing is not preset so envelope 1, 2, or both can be assigned to control the it! The LFO section is fully featured including a random output and onset delay. Of course there is full preset saving and plenty of performance oriented controls. The one downside is that it does not include chorus or ensemble like many of the other Roland polys! It does have the coolest color scheme and those futuristic aluminum sides though. The external analog ins include arpeggiator clock in, patch shift, pedal hold and CV for the VCA and VCF. Of course it has MIDI as well so there is tons of interfacing available. This synth is in great working condition and was just serviced by our in house technician. The panel assembly, bender and keybed were refurbished, faders and jacks were resoldered, the master tune pot was replaced, and a standard IEC connector was installed. The replaced master tune pot does not fit the original knob due to lack of an old stock part to replace it with. We will include the original knob with the sale. Cosmetically the synth is looking good but has some wear on the back and a taped on note of the I/O fused to the top corner. The keys are in great shape and are very white. One of the fader caps in the envelope section is significantly more yellow than the others and of course there is the replaced tune knob. All buttons are functioning fine and it sounds incredible as usual!"
SN 322506 was previously listed here.
1970s Moog Sonic Six Synthesizer SN 2004
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"1970s Moog Sonic Six Synthesizer. Serial number 2004. This is the version with the Moog ladder filter. It works (makes sound) and all sliders/parameters seem to work, but it probably needs some service/calibration/tuning and the keybed would benefit from re-lubrication. The power supply has been partially rebuilt with new filter capacitors and diodes. It's in pretty good shape cosmetically (Please refer to photos for condition). It is missing a few slider caps although most of the original ones are intact. The internal speaker works..."
via this auction
"1970s Moog Sonic Six Synthesizer. Serial number 2004. This is the version with the Moog ladder filter. It works (makes sound) and all sliders/parameters seem to work, but it probably needs some service/calibration/tuning and the keybed would benefit from re-lubrication. The power supply has been partially rebuilt with new filter capacitors and diodes. It's in pretty good shape cosmetically (Please refer to photos for condition). It is missing a few slider caps although most of the original ones are intact. The internal speaker works..."
Akai S612 Midi Digital Sampler & MD 280 Disk Drive w/ Manuals & Disks
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"This listing is for a Nice Used Akai S612 Midi Digital Sampler with MD 280 Disk Drive :
..including (10) 2.8 Quick Disks
(9) are Blanks and 1 Disk I copied an Original Akai Sounds from the 80's LA Studio 20 Killer Bass (Side A), and LA Studio 20 Double Bass (Side B). for you to have a sound on hand when you get this set.
We had the Power Supply Board Refresh with new capacitors, and other aging components.
The Disk Drive Work Great, it has a New Belt, (also come with a New Back-Up Belt ).
Also Included The Original Replacement Felt Pad that came with the MD280 when the original one wear out (see last photo)
Original Akai S612 Midi Digital Sampler Operator Manual
Original Akai MD280 Disk Drive Operator Manual
Inputs/Outputs Have Been Cleaned
Unit Works Great"
via this auction
"This listing is for a Nice Used Akai S612 Midi Digital Sampler with MD 280 Disk Drive :..including (10) 2.8 Quick Disks
(9) are Blanks and 1 Disk I copied an Original Akai Sounds from the 80's LA Studio 20 Killer Bass (Side A), and LA Studio 20 Double Bass (Side B). for you to have a sound on hand when you get this set.
We had the Power Supply Board Refresh with new capacitors, and other aging components.
The Disk Drive Work Great, it has a New Belt, (also come with a New Back-Up Belt ).
Also Included The Original Replacement Felt Pad that came with the MD280 when the original one wear out (see last photo)
Original Akai S612 Midi Digital Sampler Operator Manual
Original Akai MD280 Disk Drive Operator Manual
Inputs/Outputs Have Been Cleaned
Unit Works Great"
#Jamuary2020 08, Arturia MicroFreak and Zoom MS-70CDR, Played Delays
Published on Jan 31, 2020 Waveformer
"Playing with the delays as a live improvisation instrument, using the Arturia MicroFreak and Zoom MS-70CDR.
My music on Bandcamp: http://waveformer42.bandcamp.com/
The patches for the MicroFreak and the MS-70 are included below.
This jam features three Zoom MS-70CDRs running in parallel, with long delays timed to fill in the gaps in the slow eight note arpeggiated pattern played by the MicroFreak. The long delays are accompanied by a trigger (fast, repetitive) delay, a filter delay, an auto-pan delay and a reverse delay. Delays are turned on and off during the jam to vary the melody and intensity.
The Zoom MS-70CDR patches are included below. To load a patch into the MS-70, connect your MS-70 to your computer using a USB cable, go to https://g200kg.github.io/zoom-ms-util..., right-click an available patch slot, select "Import Patch from text", and paste in this text.
January 2020: SP-2400 Production Update
Published on Jan 31, 2020 Isla Instruments
NOT @NAMM 2020: MFB SYNTH PRO // 1st CONTACT // 2
Published on Jan 31, 2020 LESINDES
"First contact with MFB SYNTH PRO, 8 voice, 3 VCO polyphonic synth with 2 filters. A 12 dB multimode filter which is a genuine MFB design and a 24 dB lopass SSM filter.
This is a unit of the REGULAR PRODUCTION!"
SynthFest 2020 - Tombola Vintage
Published on Jan 31, 2020 SynthFest France
Moog Minitaur & Sirin - Custom Overlays
Published on Jan 30, 2020 Human Oversynth
"This video shows how to install our overlays on the Moog Minitaur and Sirin synthesizers. Overlays for these synthesizers and others are available from our online store: www.oversynth.com"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH











































