Tuesday, February 11, 2020
Makeshift VHS Tape Ribbon Controller In 3-Minutes
Published on Feb 11, 2020 gstormelectro
Audio + Video by G-Storm Electro c. 2020
Haven't had any synth repairs or DIY hacks in a while.
A buddy sent a FB video link and asked what's up with this.
Somebody was using a videotape as a makeshift ribbon controller.
Using the tape to send a control voltage to their modular gear.
You may have seen something like this, but wondered about the details required.
Does it actually work?
If so what are the necessary steps?
Let's find out.
**BLOG** http://gstormelectronica.blogspot.com/
**LISTEN/DOWNLOAD** http://soundcloud.com/gstormelectro
**TWITTER** http://twitter.com/gstormelectro
**REVERB** http://reverb.com/shop/gstormelectro
Vinicius Electrik Lizard Module Demonstration by Monty
Published on Feb 11, 2020 Key Magic Inc
Monty describes our Vinicius Electrik Lizard VCO / Sequencer module.
5 Patchlets with LedRover and ReduXer from VoicAS
Published on Feb 11, 2020 Omri Cohen
"If you like what I do and want to support my work, consider joining my crew on Patreon - https://www.patreon.com/omricohen"
LedRover is a multi diode overdrive module that adds complexity and harmonic richness to any signal.
Three types of diode clipping modes are avaliable:
* Red LED for a compressed drive that is rich in harmonics.
* Blue LED for a punchy & crunchy Drive.
* Germanium diode for a more vintage overdrive.
Technical Specifications
Custom made Drive potentiometer with 300 degrees rotation allows for more fine control and higher resolution of the drive amount.
Three bass boost levels.
Drive CV input with attenuator for external control of the drive.
Drive "Color" - changes the drive brightness.
input gain amplifier for pushing the drive to it's limits.
Dual input with gain amount.
Noise filtering and resettable fuses on the module's power input.
Reverse current protection.
Current Draw
+12V : 5mA
-12V : 5mA
Dimensions
Width : 8HP
Depth : 25mm
$170"
Reduxer
Stereo sample rate/bit reducer
Reduxer is a stereo sample/bit reducer effect module.
Depends on it's signal, It can produce dynamic range of sounds from knurly bitcrushing to formant/vowel style effects.
Technical Specifications
Custom made Redux potentiometer with 300 degrees rotation for extra "crashing" resolution.
Two proprietary reduxer circuits for stereo effect.
Inputs are normelized - supporting mono to stereo configuration.
Stereo spread offset for "motion" effect in the stereo field.
Redux Drive CV input with attenuator for external control of the bit reduction rate.
Wet/Dry mix.
input gain amplifiers for pushing the effect to it's limits.
Noise filtering and resettable fuses on the module's power input.
Reverse current protection.
Current Draw
+12V : 25mA
-12V : 25mA
Dimensions
Width : 8HP
Depth : 20mm
$150 $170
Wurlitzer Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
The Orbit III? You can find a demo of a chopped one here.
via this auction
Pics of the inside...
The Orbit III? You can find a demo of a chopped one here.
via this auction
Pics of the inside...
Serge Wave Multiplier / Res EQ in Stand Alone Box
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Serge Wave Multiplier / Res EQ in stand along box CGS / LW - Licensed. I didn't want to add another full boat to my system so I had this built by Loudest Warning aka the bad producer.
The box is roughly 7"x4"x3" with STS style molex connector."
via this auction
"Serge Wave Multiplier / Res EQ in stand along box CGS / LW - Licensed. I didn't want to add another full boat to my system so I had this built by Loudest Warning aka the bad producer.
The box is roughly 7"x4"x3" with STS style molex connector."
Casio VZ-10M Rack Module MIDI Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Included are the original manual, MIDI specification booklet, and two ROM soundbank cards in their original vinyl protective sleeves — the standard RC-100 card that was included from the factory, and the increasingly hard to find RC-110 "US COLLECTION". NOTE: The power supply is for 100-120V 50/60 Hz power only, and I'll include a normal grounded power cord for a buyer located in either USA or Canada.
Also, while this synthesizer module is in very clean condition (among the cleanest specimens I've seen actually) it is not strictly "mint". I've circled some minor scuffs in the finish in yellow in some of the listing images, so please look carefully — some of them I was hardly able to capture with camera and were otherwise something I had to really look for, but I also wanted to be absolutely transparent about the condition of the item you are buying. The display remains reasonably bright and easy to read, and is also free of scratches (as is the rest of the faceplate). There isn't even noticeable rack rash on the ears. The owner's manuals are in good, very readable, unmarked condition but the cover flap on the owner's guide is a bit torn at the bottom and like the MIDI spec guide exhibits some shelf wear.
Honestly I think this is in many ways a more charming synthesizer than the original Yamaha DX-7, for which this synthesizer along with its keyboard cousin (the VZ-1) were Casio's answer on the market to. The quality of the individual oscillators is (imo) noticeably better, there's ring modulation, and the timbres rawer and somehow "dirtier". It's noteworthy that sound output on this module is a bit crisper and quieter than those of the VZ-1 (and yes, even the DX-7). With the right timbres through a quality reverb, this could be a lovely instrument. Sadly, I no longer play."
via this auction
"Included are the original manual, MIDI specification booklet, and two ROM soundbank cards in their original vinyl protective sleeves — the standard RC-100 card that was included from the factory, and the increasingly hard to find RC-110 "US COLLECTION". NOTE: The power supply is for 100-120V 50/60 Hz power only, and I'll include a normal grounded power cord for a buyer located in either USA or Canada.
Also, while this synthesizer module is in very clean condition (among the cleanest specimens I've seen actually) it is not strictly "mint". I've circled some minor scuffs in the finish in yellow in some of the listing images, so please look carefully — some of them I was hardly able to capture with camera and were otherwise something I had to really look for, but I also wanted to be absolutely transparent about the condition of the item you are buying. The display remains reasonably bright and easy to read, and is also free of scratches (as is the rest of the faceplate). There isn't even noticeable rack rash on the ears. The owner's manuals are in good, very readable, unmarked condition but the cover flap on the owner's guide is a bit torn at the bottom and like the MIDI spec guide exhibits some shelf wear.Honestly I think this is in many ways a more charming synthesizer than the original Yamaha DX-7, for which this synthesizer along with its keyboard cousin (the VZ-1) were Casio's answer on the market to. The quality of the individual oscillators is (imo) noticeably better, there's ring modulation, and the timbres rawer and somehow "dirtier". It's noteworthy that sound output on this module is a bit crisper and quieter than those of the VZ-1 (and yes, even the DX-7). With the right timbres through a quality reverb, this could be a lovely instrument. Sadly, I no longer play."
Waldorf Microwave XTk Wavetable Synthesizer ( 30 voices )
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Custom white ALBS knobs. The originals are known to break down over time. You can get ALBS knobs at Modular Addict here.
"Here is the opportunity to get aWaldorf Xtk (30 Voices ) in Excellent condition !
*Professionally SERVICED in FULL Working order*
+Flight case (Brand New )
+Full set of New Knobs."
via this auction
Custom white ALBS knobs. The originals are known to break down over time. You can get ALBS knobs at Modular Addict here.
"Here is the opportunity to get aWaldorf Xtk (30 Voices ) in Excellent condition !
*Professionally SERVICED in FULL Working order*
+Flight case (Brand New )
+Full set of New Knobs."
Crumar Bit 99
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Video in the listing previously posted here.
"Here is the opportunity to get a Crumar Bit99 in Excellent condition !
*Professionally SERVICED in FULL Working order*"
via this auction
Video in the listing previously posted here.
"Here is the opportunity to get a Crumar Bit99 in Excellent condition !
*Professionally SERVICED in FULL Working order*"
Roland Vocoder Plus VP-330 w/ Kenton Midi
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
*Professionally SERVICED in FULL Working order*
via this auction
*Professionally SERVICED in FULL Working order*
MFB SYNTH PRO /////// S T E R E O \\\\\\\
Published on Feb 11, 2020 LESINDES
"Checken the stereo capabilities of MFB SYNTH PRO. MFB 12 dB multimode filter panned to the left and SSM 24 dB LP panned to the right.
4 panning modes are available: Mono / Narrow / Wide / L-R -- I was using mostly the latter!
The first patch filters in serial mode , 2nd in parallel.
The audio is recorded straight out of the machine.
Sometime I add in also a bit internal reverb (s. knob 4 from top of the extreme right row)."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
