Driving the LA's I-110 / CA-110 Harbor Freeway | Original music

video upload by CatSynth TV

"We drive the length of "the 110" Harbor Freeway in Los Angles from its southern end in San Pedro near the Vincent Thomas Bridge to the "four level interchange" with US 101 just north of downtown LA. From the southern end to the interchange with I-10, the freeway is signed as Interstate 110; north if I-10, it is California Highway 110.

This one was a lot of fun and quite special for us at CatSynth, and we really enjoyed the drive, creating the disco-infused soundtrack, and sharing it with all of you!

The drive continues along the remaining segment of CA 110, the Arroyo Seco Parkway in an upcoming video.

Software Instruments:
Arturia Clavinet V, Stage 73, Memory V, Pitch Shifter 910
Cherry Audio ESQ-1, Pro Soloist, Solovox
BFD3 Drums (Ken Scott Billy Cobham kit)
BLEASS Spectral Resonator
EastWest Ministry of Rock, Ra, and Stormdrum 2
Dawesome Kult

Hardware Instruments:
Vintage Minimoog
Vintage Octave CAT
Buchla 158 Red Panel module
E350 Morphing Terrarium module
Metasonix R54 module
Stryomon Starlab module
Kenton USB Solo mk2

#losangeles #highway #highwaydrive

0:00 Introduction
0:10 I-110
6:50 CA 110
8:05 To be continued"

Dub Techno with FM Synthesis on a Game Boy Advance | Peak 2026-07-04 by atnr

video upload by atnr

"A live dub techno jam built around a Game Boy Advance running FMS — a groovebox by Lo-Bit Club that runs real-time 2-OP FM synthesis natively on the GBA. The sequence and FM sounds you hear from the GBA are all generated on the handheld itself. The ‪@rolandglobal‬ TR-08 and ‪@MoogSynthesizers‬ Subharmonicon are synced via the MSY2. The TR-08 runs through a ‪@strymon‬ blueSky reverb, while the Subharmonicon is tweaked in real time through the Strymon TIMELINE delay. The OP-1 field loops reverb-soaked chords, and the ‪@ChaseBliss‬ MOOD MKII layers evolving micro-loops on top.

Gear used:
・Game Boy Advance + FMS ( https://lobit-club.itch.io/fms )
・Moog Subharmonicon
・Roland TR-08 → Strymon blueSky
・Strymon TIMELINE
・Teenage Engineering OP-1 field
・Chase Bliss MOOD MKII
・Kenton MSY2 (sync)

Track: Peak 2026-07-04 by atnr"

Kenton USB Solo mk2 MIDI to control voltage review + Big Merp Cameo 😺

video upload by CatSynth TV

00:00 Introduction
00:18 Overview
00:55 MIDI-to-CV demo with note, control change, and aftertouch messages
06:49 Saving configurations as presets
07:42 Converting MIDI clock to CV for synchronization
09:45 Conclusion

"In today's demo and tutorial, we have a bit of fun with the new USB Solo mk2 from our friends at Kenton Electronics. The handy little gadget builds on Kenton's previous MIDI to CV converters, and allows one to convert MIDI from USB or 5-pin DIN to a variety of CV signals, including pitch (1V/Oct), gate and trigger, 3 aux channels for CC, velocity, aftertouch, and more. It also supports MIDI clock, allowing one to synchronize Eurorack and other analog synthesizers with your DAW or MIDI sequencer. Additional features include a built-in LFO and envelope.

Big Merp decided he wanted to be a part of this demo, too 😺"

Patreon: / catsynth | https://shop.catsynth.com | https://ko-fi.com/catsynth

Recreating Pink Flyod's Iconic EMS Synthi AKS Sound | Voltage Labs

video upload by Voltage Labs

"In 1973, Pink Floyd released 'The Dark Side of the Moon', one of the most influential albums of all time. The track 'On the Run' is famous for its use of the Synthi AKS, a classic London-made analog synthesizer by EMS (Electronic Music Studios).

Today I’d like to show you how to recreate the iconic sequence of that track on an EMS Synthi A, then show how to program it on a Moog Mother-32, and finally how to patch it in a Eurorack system."

Kenton Electronics interview Superbooth 26

video upload by Take the Fear out the Gear

"Hi everybody this time we bring you the kenton electronics interview at Superbooth 26. Website https://kentonuk.com/

Coming Soon – Kenton Interchanger

The Interchanger is a very flexible, programmable MIDI patch bay – something many of our users have been asking us to make for a long time! Its feature set makes it just as useful on stage as it is in the studio, while retaining the ease of use that our products are known for; not to mention build quality and reliability you can depend on.

12x DIN MIDI inputs and outputs – 8 pairs of IN/OUT on the back, plus 4 pairs of IN/OUT on the front.

1 x 3.5mm TRS MIDI input and 4x 3.5mm TRS MIDI Outputs.

CLICK FOR MORE »

Rhythmic Filter Sequencing With Oxi One MkII

video upload by Alec Sea

"Inspired by Anthony Marinelli's great video on rhythmic filter sequencing, I thought I'd show how to do a similar thing using the Oxi One MkII and my eurorack modular synth.

00:00 - Intro jam
01:34 - The purpose of this video
02:22 - Explaining the patch
05:12 - Settings on the Oxi One
07:25 - Demo
12:25 - Conclusion

Gear used in this video:

Oxi One MkII
Oxi Pipe
Native Instruments Kontrol S61 MkIII
Korg multi/poly module
DF Audio Minibay v2
ART MX822 Line Mixer
Behringer U-Phoria UMC204HD
Kenton MIDI Thru-12
Rode Wireless ME Microphone
Meris Mercury X
CIOKS DC7 Power Supply

Eurorack:
DIY Case
Intellijel: Quadra and Expander, Quad VCA, Triplatt
Befaco: DivKid Output Bus, ST Mix
Doepfer: A-111-4 Quad VCO
Joranalogue: Filter 8
Erica Synths Pico Input
4MS Row Power 45"

Kenton Spin DOCTOR 1999 - Purple

via this Reverb listing

You can find a demo of one previously posted here.

CLICK FOR MORE »

Unique Modded Yamaha CS30 Modded DUOPHONIC Midi Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"This is a rare 1977 cs30. Yamaha’s most complex mono synth. The closest thing Yamaha made to a modular system. This one was modded specifically for me. Individual cv inputs for the 2 oscillators and individual gate inputs for all 3 egs. I have this hooked up to 2 Kenton Pro-Solo midi/cv converts. One is set to low note, one to high note. Now this synth plays like a classic duophonic synth like the Odyssey, sh7, etc through any midi keyboard or sequencer. Both midi converters and cables are included. It also has custom wood end pieces. I will also include the original plastic ones. This is a crazy synth with 2 oscillators, sub osc, 3 egs, 1 lfo, ring mod, cross mod, 2 multi mode filters, 2 amps, 8 step sequencer that can trigger any of the egs so you can make complex lfo shapes and modulate anything. Tons of modulation options everywhere. Even the external input can be a mod source and the lfo can be different shapes at different destinations and be effected by an eg. Amazing synth. Everything works perfectly. It should be noted that when using the cv/midi, some functions like detuning and portamento do not work. But the Kentons can do both and even add tuning range and extra LFOs."

CLICK FOR MORE »

How to Calibrate The Kenton Pro Solo To A Minimoog

video upload by synthpro

"In this video I walk you through the steps of interfacing the Kenton Pro Solo MIDI to CV box to a vintage minimoog. This same procedure will follow for other synthesizers interfaced to this box.
I hope this helps some of you out.

Sincerely,
Jareth"

Roland TR-808 Rhythm Composer SN 310994

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"Single owner and stationary in studio for entire lifetime. The tempo knob is missing, but this can be purchased from spare part suppliers. Installed Kenton retrofit d-sub for MIDI control."

CLICK FOR MORE »

Roland TR-808 Rhythm Composer SN 041626 Pro Serviced w/ Kenton Midi

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"This is a really nice one considering its age. No dents, scratches, or other damages. Recently serviced by the best analog service in the Netherlands. It has the pitch mod (using the fine potentiometer) and the Kenton MIDI kit installed on the sync port. The sync port can still be used for DIN sync, but can now also receive MIDI. Supports both MIDI sync and MIDI notes, now with velocity sensitivity as well! Compatible with other Roland drum machines—just plug in a MIDI cable and start playing. All original functions still operate as intended, and the modifications can be fully reversed if desired. No holes have been drilled. The power supply has been converted to 220 volts. All potentiometers and switches are new."

CLICK FOR MORE »

Korg MiniKORG 700S SN 00110 w/ Extras

Note: links to listings are affiliate links for which the site may be compensated.
video uploads by Vintage Synthlab

Playlist:

1. 1974 MiniKorg 700s K2, vintage analog synthesizer for sale in Portland, Oregon - Demo 1 (Pop Songs)

This is Demo 1 (1 of 2 videos) highlighting the sound and character of the 700s / K2 synthesizer in action. This video contains 3 short pieces from 3 famous songs that were written and recorded during the 1970s using the 700s / K2 synthesizer.

1. The Cure - A Forest
2. The Cars - Just What I Needed
3. The Normal - T.V.O.D."

1974 MiniKorg 700s K2, vintage analog synth for sale in Portland, Oregon - Demo 2 MIDI Bach BWV 565

2. 1974 MiniKorg 700s K2, vintage analog synth for sale in Portland, Oregon - Demo 2 MIDI Bach BWV 565

This is Demo 2 (2 of 2 videos) highlighting the sound and character of the 700s / K2 synthesizer in action, and showing the external control of DAW, via MIDI, into a MIDI-to-CV convertor, connected to the CV inputs on the back side of the 700s. The MIDI songs has multiple organ and harpsichord tracks. The MIDI output to the 700s is one of the main tracks for this piece, panned to the RIGHT side of the stereo field, to help discern the 700s sound. The point of this video is to show the capability of DAW control, given all the external hardware interfaces, which comes with the sale of the 700s as one package.

via this Reverb listing

"All items that come with this sale:
* 1974 Korg MiniKorg K2 / 700s
* Kenton CV Upgrade (adds 3 CV input jacks/sockets on backside of synth)
* Kenton Pro Solo Mk2 (MIDI-CV convertor)
* Custom Flight Case
* USB to 2-channel MIDI convertor box + long USB cable

Demo video # 1:
Demo video #2:

This 1974 MiniKorg K2 / 700s works and sounds great. It has the Kenton CV upgrade, a hardshell case, and I’m throwing in a Kenton Pro Solo Mk2 MIDI-to-CV converter, a USB to 2-ch MIDI convertor, long USB cable.

Everything works great and is ready for any modern studio DAW, or adaptation to your external MIDI capable hardware!

The Kenton CV upgrade “3 socket” kit has three 3.5mm ports (easily interfaces with modular synthesis architecture!) or a MIDI-to-CV convertor (which I am including for free with this sale). The 3 inputs are: CV (pitch in), GATE (note on/off), FILT (filter control).

The synth has been with me for about 14 years. I serviced vintage synth and pro-audio gear for the last 30+ years, and this was one that I restored, upgraded, used for recording, and cared for. Every key contact works great, all adjustments have been calibrated, it stays in tune, and every feature works."

CLICK FOR MORE »

Yamaha CS-50 w/ Kenton MIDI SN 2546

Note: links to listings are affiliate links for which the site may be compensated.

via this eBay listing, also on Reverb

"This Yamaha CS-50 is a classic analog polyphonic synth that delivers warm, expressive tones with rich modulation and filter control. Known as the little brother to the legendary CS-80, the CS-50 carries much of the same sonic character—lush VCOs, a powerful resonant filter, and a smooth, dynamic response that makes it ideal for pads, leads, and atmospheric textures. This particular unit has been upgraded with a Kenton MIDI kit, giving it modern playability while keeping the original sound path fully intact.

The Kenton MIDI retrofit gives you note on/off control, pitch bend, and sustain over MIDI, allowing you to control this analog beast from any modern DAW or MIDI controller. It still functions just as it always has from the front panel—no limitations there—but with the added flexibility to drop it right into a current production setup. The synth is in solid shape, with the original wood panels, keybed, sliders, and case showing honest wear but fully functional. All controls are smooth, all keys and sliders work as expected, and it’s ready to go.

This is a hard-to-find synth on its own, and even harder to find with a Kenton MIDI upgrade already installed and tested. If you’re after vintage analog character with real-world usability in today’s studio, this CS-50 offers a serious combination of tone, playability, and legacy value."

CLICK FOR MORE »

Minimoog with MIDI and Red Makeover

Note: links to listings are affiliate links for which the site may be compensated.

via this VEMIA listing

Click the auction link on top when you get there for additional listings.

VEMIA is Peter Forrest's auction house. He is the author of The A-Z of Analogue Synthesizer Books.

"Minimoog Model D with Kenton MIDI conversion > This minimoog has been recently serviced and plays very well. It has a Kenton MIDI conversion which allows it to be played over MIDI. The top panel is in good condition but the case has quite a few knocks, especially on the left side - see the photos. The origin of the red paint and red knobs is unknown but is a professional job. The case was obviously dismantled and painted inside and out. There are two non-standard silver knobs for the master tuning and Osc 2 tuning. These are 'vernier' knobs which allow for very fine tuning. They have 10 turns instead of the original knob's 1 turn.

The voltage plaque says 110V but it was converted a long time ago to UK /euro voltage with a UK plug.

In response to questions about this, all I can say about the modifications is that they were there when I bought it in around 1990 - I find the fine tuning knobs really useful. I don't have any internal photos but the guy that serviced it said that some circuit boards have been changed, I believe it has the later oscillator boards. VEMIA can collect and pack: 18GBP."

CLICK FOR MORE »

LINNDRUM LM2 + KENTON MIDI DEMO

video upload by Synth Tailor Electronics

"The legendary Linn Drum LM2 drum machine that took the 1980s by storm!

This Linn Drum has been fully restored + Kenton Midi kit installed! If you're in the market for a Linn Drum, please let us know- we have a great selection of vintage synthesizers, drum machines and vintage outboard gear FOR SALE! Please visit our website or Instagram page for more details

For the video, we used the Korg EMX1 sequencer via midi to trigger the sounds of the Linn Drum. We also have the Linn hooked up to a Lexicon 480L for a great sounding reverb.

A fully restored Linn Drum from our repair shop comes with the following necessary restorations:
-All sliders/pan pots disassembled, cleaned, re-greased and re installed
-Synthronics PSU upgrade installed (no more noisy transformer/old PSU design: 100V-240 V universal voltage)
-All lilac electrolytic capacitors changed out with new axial capacitors
-Firmware updated to latest version 3.2
-Kenton Midi kit installed for use with a modern set up
-All pushbutton switches opened up, contacts cleaned, and tested thoroughly for more reliability
-Factory Presets uploaded

If you have a vintage synthesizer, drum machine, outboard gear, or tape machine that needs repaired or restored, please reach out on our website: www.synthtailorelectronics.com"

Roland TR-808 Rhythm Composer SN 124943 w/ Kenton MIDI

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

"It has Kenton MIDI ports."

CLICK FOR MORE »

ps i love you

video upload by Memetune Studio

"Keith fitted a Kenton MIDI kit into the Korg PS3100. I love it!

It means you can play polyphonic sequences on it - even a monophonic sequencer like this makes it play polyphonically - its so cool"

Korg PS-3100 Polyphonic Synthesizer SN 710065

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

"This super rare synthesizer, created by the master Fumio Mieda, is the great grandfather of the MS-20. The PS-3100 comes equipped with an unheard of (especially for 1977) 48 voices of polyphony, scaling controls, patchbay and more. The Kenton Mod adds Midi In/Thru and CV control for pitch, mod, aftertouch and more."

CLICK FOR MORE »

Roland TB-303 Bass Line w/ Kenton D-Sync

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

CLICK FOR MORE »

Roland TR-808 + Kenton MIDI

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

"*Professionally SERVICED in FULL Working order*

+Kenton Midi Fitted"