Loudest Warning/Serge panel first jam

video upload by Happy Noises

"First jam on the new Loudest Warning Serge panel. This ended in an unexpected rhythmic beat. Eventide H90 added. GETS LOUD in the middle! Be careful with your ears!!"

Loudest Warning / 4U / Serge Modular Synthesizer Panels - First Patches

video upload by Modern Fate

"This is a collection of my first month of patching on these fantastic http://www.loudestwarning.co.uk/ panels. Sorry for the poor video quality at times, I should get a proper camera.

Panel setup can be seen on these two pictures:
voice: https://loudestwarning.tumblr.com/pos...
sequencer: https://loudestwarning.tumblr.com/pos...

Everything has a bit of EQ and compression applied, some pieces have a touch of reverb for context. Every sound from the panels and the patches as you see them in the video.

0:00 ringmodulation percs
0:08 melody 1
1:33 rain
1:45 melody 2
4:17 beat
5:19 melody 3
6:50 melody 4"

Sound Sample: Loudest Warning Sing To Me (instrumental drone)

video upload by Matt Lowery

"Hi friends! Today I’m here with a pretty simple, short video showcasing the Loudest Warning Sing to Me panel. It’s a beautiful instrument, and combines a pair of Buchla 258’s with a small selection of serge modules in a single panel. The truth is, this was a video I captured as an Instagram post, but I was having such a nice time that 1 minute turned into 8 minutes pretty quickly! I remember when I was researching this format, there wasn’t a ton of content or sound samples of Sing To Me, so I figured I’d toss this out for posterity. A touch of reverb and delay were added in post. Have a great day."

Note this is the first post to feature a demo of the panel. One was listed for sale back in Nov here.

Some info & pics via Loudest Warning

"There are quite a few version of this around, some have different names.

258 VCO -> Triple Wave Shaper implementation: Above the 258 VCO’s is a Serge Triple Wave Shaper, normally this has three sections, but on panels with the above design the left hand shaper is one section, the right hand is two sections in series with VC 1 input tied to both of teh two sections simultaneously – configuration:

Bonus mixer between SSG and DTG: This is a simple unity gain mixer with two inputs and one output. On the other side of the DTG (between it and the Dual VCA) are two more outputs which might be labelled PEAK/TROUGH, MIN/MAX or AND/OR, these are all different names for the same thing, that is minimum / maximum outputs derived from the two inputs to the bonus mixer. Some mixers also have a Full Wave Rectifier output.

Most / all other modules are stock and info about use of these can be found on the internet, but here are some interesting things here:

https://sergemodularinfo.blogspot.com/

Great information on Serge in general and the Wave Multipliers in particular!"

CLICK FOR MORE »

Loudest Warning Sing To Me panel

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The LW Sing To Me panel build by Charlie. Will ship with a boat"

Loudest Warning Sequencing Panel

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

CES Ed-Lab 70M

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Slightly Nasty 4U Modular

This one was spotted and sent in via Martin Gnägi.

Playlist:

Slightly Nasty Modular, Roland MKS-7, and Akai S3000XL
Slightly Nasty Modular - Cinematic Jam
Slightly Nasty Modular - Techno Jam
Five Video Game Covers in Five Minutes
The Model 1011 Discrete VCO
Slightly Nasty Modular Jam
Pit Bull DM-1S - Metal Demo
Slightly Nasty Modular - 8 bar sequence jam
Slightly Nasty modular - dirty cyberpunk bass

Current module line-up via https://www.slightlynasty.com:

CLICK FOR MORE »

STROH FULL PANEL SYSTEM (4U boat) 2020 Silver

Note: Auction links are affiliate links for which the site may be compensated.
DrJ3RK

via this auction

"I'm selling one full 4U "boat" / panel synthesizer. This is likely the last full panel synth that I will be building. (I will be continuing to build LW format modules going forward.) This panel runs on +/-12V via 4-pin XLR compatible with Random*Source power standards. This is electrically compatible with Serge, Loudest Warning, and other 4U/banana formats, though a bit of scaling may be necessary in some cases for CV ranges.

Here is a list of the functions/features of each section. Some are completely new (to my lineup) and may be available as PCBs at some point in the near future.

Clock & Divide - This is a full 1V/Oct VCO with range switch. It has a 0-5V unipolar sawtooth output (handy when connecting with Serge). It has a Sync input, and then the following Clock-pulse outputs. Clock, Div/2, Div/3, Div/4.

Bit Station - This is a slightly enhanced version of my usual Bit Station configurations. It can output pseudo-random and random (to 8-bit resolution) CVs. It can output pitched digital noise when clocked at audio rates. It will output analog white noise. The Data Input is an adjustable-threshold comparator (big knob controls it). Patch in waveforms, white noise, etc. to be processed by the internal digital shift register. The serial output is the logic-level data output of the shift register (can be used for random gates, etc.) There is also an XOR logic section which can also be used as a ring modulator.

2X SSI-Oscillators - These are standard, full-featured, precise VCOs. They use the SSI-2164 for exponential conversion, so no matched-pair-tempco-resistor circuit. They have hard sync, linear FM, Pulse Width Modulation, and saw, tri, pwm, and sine outputs.

Dual Angle - This is two Angle Generators. (Linear Slope Envelope/LFO modules) They work in Attack/Decay, or Attack/Release (switched) and either One Shot or Cycle modes. They also output an end of Cycle pulse for triggering other things, or retriggering for more complex shapes.

Reso-Gates - This is two resonant Low Pass Gates. Controls are Cutoff, CV-1 Level, and Resonance. There is also a second non-attenuated CV input.

Output - The final module is a stereo output module with pan control per input. It's a two-input mixer with panning, that then goes to a stereo output. High quality components were used here. Audio grade AC coupling caps, LME47920 op amps, etc.

CLICK FOR MORE »

Serge Wave Multiplier / Res EQ in Stand Alone Box

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Serge Wave Multiplier / Res EQ in stand along box CGS / LW - Licensed. I didn't want to add another full boat to my system so I had this built by Loudest Warning aka the bad producer.

The box is roughly 7"x4"x3" with STS style molex connector."

CLICK FOR MORE »

Metasonix 4u + Serge Modular Synthesizer + Cats

Published on Dec 4, 2019 FOR channel

"Metasonix 4u + Serge Modular Synthesizer via Loudest Warning Programmer + DUSG"

Stroh Modular 4U Loudest Warning Format Modular System

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a one of a kind custom full plug-and-play Loudest Warning System made, designed, hand wired / built and modified by Stroh / J3rk.

This is my favorite synth I've ever owned (and I've had everything from Cwejman, to Macbeth, Moog, etc) but I really need to pay off some student debt so unfortunately here goes.

It includes 8 Loudest Warning format modules professionally custom built by Stroh / J3rk and modified (per request) to work perfectly with 12v and 15v Power. None of these modules have ever been for sale.

Whats included in this bundle -

LW Modules (I've never seen any of these modules for sale before, kits or complete) -
Stroh - MCVCO With Buchla Knobs (Complex Thru Zero VCO / LFO)
Stroh - DPO LW module (Complex VCO / LFO)
Stroh - Q Q LW module (Wavefolder, Scanner, Mixer?)
Stroh - Dual Angle LW module (Dual Envelope / Transient generator, LFO, Logic generator)
Stroh - MSF (Lowpass, Bandpass, Highpass filter with dual FM inputs and pinging)
Stroh - Dual VCA LW module
Stroh - Out LW module (Dual output module with panning, independent mono 1/4" outs and a summed stereo / headphone output.
Stroh - M I (Midi interface with gate output and 2 CV outputs) Works great with my Keyboard.
Boat / Skiff / Power
cLee - Loudest Warning steel boat w/ option for rack ears.
cLee - Loudest Warning Bus board with extra spaces for more LW modules.
High quality 15v pre-wired Plug-and Play Serge Power supply.
Cables
16 Pomona Banana Cables (Various lengths)
2 long TS 1/4" to 1/8" cables for hooking the mixer into your Eurorack, etc.
1 Very long Hosa TRS 1/4 to 1/8 cable
1 Midi Cable.
2 New Gold Plated TRS to Female XLR cables for main stereo output.
2 New Gold Plated Male TRS to Male XLR cables for main output.
2 Monster 1/4" TS Gold plated cables.
Gold Plated 1/4" to 1/8" Headphone adaptor.
Bonus Free!
If you are a module builder (or know one) I can include a few cLee LW Faceplate's, PCB's and Brackets as I will not have time to make these anytime soon unfortunately. Please let me know if you would like them.
cLee - Bits PCB's + faceplate (some components added, not by me)
cLee - VC Timer PCB's + Faceplate set
cLee - Euclidian Sequencer PCB + Faceplate set
cLee - 3 LW PCB Brackets

Each module in this skiff is very rare and has never been for sale retail (check google), They may be one-off modules. Stroh does not make many modules for other people (maybe none anymore?) so I'll doubt these will ever come up again for sale."

CLICK FOR MORE »

Serge Format Ian Fritz Modular Synth Panel

Note: Auction links are affiliate links for which the site may be compensated.

via this auction:

"Selling an amazing panel for your Serge-format system. All built by me from Bridechamber kits where possible, cermet pots on VCOs etc. Passed to pro-builder thebadproducer for checking, calibration and wiring.

In perfect working condition.

Comes with male 4-pin xlr on the back for power as I have a RandomSource supply. Holes in the side are pre-drilled for rack ears from Takachi (ears not included, but I can point you in their direction!).

CLICK FOR MORE »

Manhattan Analog SVVCF at Thonk

via Thonk

"We’re now stocking the MA SVVCF Filter Panel and PCB set, we have a restock of the Penrose Quantizer and the Circuit Abbey Tick kit too.

We also have some brand new 4U panels in from Charlie at Loudest Warning; the Stroh Ultrafade VCO and Stroh Pico VCO."


Manhattan Analog Discrete SVF Test 01