via this auction
Note this is part of the listings previously posted here. Be sure to see the other items as well.
Wednesday, July 29, 2020
Yamaha Rm1x - multitimbral synth and sequencer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Note this is part of the listings previously posted here. Be sure to see the other items as well.
via this auction
Note this is part of the listings previously posted here. Be sure to see the other items as well.
yamaha rm1x session - lockstep 14th file mix
rm1xapm
"another rm1x live session, using midi delay to shuffle the snare drums. Microsampler serves the drums samples."
YAMAHA CS40M SYNTHESIZER SN 1240
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
" This rare keyboard is in AMAZING clean condition inside and out. My tech of 34 years was shocked to see how well the synth looked inside as well as the cosmetic condition as we have together seen a LOT in the past 3 1/2 decades.
After sitting in storage for the past 10 years we went thru the entire unit top to bottom cleaning everything and solving the following problems:
He replaced several shorted power supply bypass capacitors, a couple of resistors in the power supply that were damaged as a result, and he replaced a comparator IC in the analog to digital (A/D) converter circuit and cleaned all of the controls as well. He then programmed in a few simple example patches and checked all the functions. Low serial# so we think from 1979.
The result is a fine vintage keyboard with
a VERY clean bill of health. Sounds and works FANTASTIC!
BONUS!!!! Now pictured is 2 Volume & Control pedals which will be included in this listing!! Comes also with a new power cord."
via this auction
" This rare keyboard is in AMAZING clean condition inside and out. My tech of 34 years was shocked to see how well the synth looked inside as well as the cosmetic condition as we have together seen a LOT in the past 3 1/2 decades.After sitting in storage for the past 10 years we went thru the entire unit top to bottom cleaning everything and solving the following problems:
He replaced several shorted power supply bypass capacitors, a couple of resistors in the power supply that were damaged as a result, and he replaced a comparator IC in the analog to digital (A/D) converter circuit and cleaned all of the controls as well. He then programmed in a few simple example patches and checked all the functions. Low serial# so we think from 1979.
The result is a fine vintage keyboard with
a VERY clean bill of health. Sounds and works FANTASTIC!
BONUS!!!! Now pictured is 2 Volume & Control pedals which will be included in this listing!! Comes also with a new power cord."
Mutable Instruments Ambika
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The ambika has a specific character not found in other synths, very futuristic and unique when modulated, feels clear and forward. Plays very well with reverbs like OTO Bam or Quadraverb. This one in particular has SMR-4 filterboards installed in all six slots. These filters are based on the Roland Juno architecture, though unique to Ambika, they can be overdriven using the 'fuzz' parameter to warm the voices up and add a nice, sublte distortion. Can be played as a six-voice poly, a multitimbral monosynth of six parts, or any combo in between using a main out or six individual outs. Comes with the latest YAM OS and power supply."
via this auction
"The ambika has a specific character not found in other synths, very futuristic and unique when modulated, feels clear and forward. Plays very well with reverbs like OTO Bam or Quadraverb. This one in particular has SMR-4 filterboards installed in all six slots. These filters are based on the Roland Juno architecture, though unique to Ambika, they can be overdriven using the 'fuzz' parameter to warm the voices up and add a nice, sublte distortion. Can be played as a six-voice poly, a multitimbral monosynth of six parts, or any combo in between using a main out or six individual outs. Comes with the latest YAM OS and power supply."
Sequential Adds User Wavetable Import for the Pro 3 Multi-Filter Mono/Paraphonic Synth
via Sequential
Sequential Adds User Wavetable Import to Pro 3 Multi-filter Mono Synth
San Francisco, CA—July 29, 2020—Sequential today announced a significant enhancement to their acclaimed
Pro 3 multi-filter mono synth — support for user-created wavetables. A hybrid instrument, the Pro 3 features two VCOs plus a third, digital oscillator with 32 permanent factory wavetables.
Sequential’s web-based utility Wavetable Generator allows users to convert up to 16 single-cycle waves into a Pro 3 compatible wavetable and load it into to any of the 32 user wavetable slots on the synth. This significantly expands the sound palette of the instrument. Custom wavetables are generated as SysEx files that can be archived and shared with other Pro 3 owners. To use the feature, users will need to upgrade to version 1.1 of the Pro 3 operating system, available on the Support page of Sequential’s website. Both the Wavetable Generator utility and OS upgrade are provided free of charge to Pro 3 owners.
“How do you make an awesome-sounding hybrid synth even better? By letting users import their own wavetables,” said Sequential founder Dave Smith: “It opens up a lot of new sonic territory for the Pro 3. We hope users get crazy with it.” Sequential chose to provide the utility as a web app for easy access and broad support. Added Smith: “We wanted to make getting custom waves into the Pro 3 as simple as possible. Ease of use is always a big priority on our synths.”
A hybrid instrument, the Pro 3 features three classic analog filters (Prophet-6, OB-6, and ladder) and three oscillators (two VCOs and one wavetable oscillator) along with a powerful new 16-track sequencer, and the ability to connect with modular synths through its four control voltage ins/outs. The feature set is rounded out with a multimode arpeggiator, three LFOs, four loopable ADSR+delay envelopes, dual digital effects (delays, reverbs, and various time-based effects), tuned feedback, analog distortion, and extensive modulation possibilities. The synth is also capable of 3-voice paraphonic operation.
The full-featured sequencer provides 16-track sequences of up to 64 steps, with ratcheting, variable gate and sequence lengths, multiple playback modes, and paraphonic operation. It also syncs to MIDI clock and external audio input, and inputs/outputs control voltages. In addition to notes, sequence tracks can control any parameter in the 32-slot, 171-destination modulation matrix.
Sequential is offering two versions of the Pro 3, the standard edition, and the Pro 3 SE, a special edition that puts the same synthesis power into a collector-worthy design with a tilt-up control panel and premium-grade walnut trim.
The Pro 3 standard edition has a US MAP of $1,599.
The Pro 3 SE has a US MAP of $2,099.
Sequential’s Wave Generator utility can be found at: www.sequentialwaves.com
Inputs and Multiple Outputs - Summit Series // Novation
NovationTV
"-CALC- looks at how you can use the multiple outputs on our flagship polysynth, Summit, to manage sounds and your sound design. The video also takes a good look at how you can use the audio inputs to feed any external audio signals through Summit's synth engine and onto the FX.
With its multitimbral architecture and 16 voices of polyphony, Summit is like two Peaks in one instrument, enabling two completely independent patches to be split or layered across the keyboard, or switched between on the fly. And, that’s not the end of it: the addition of dual filters, greatly extended front panel controls, audio input and the same premium-quality five-octave keyboard introduced with our SL MkIII MIDI controller, put Summit in a creative league of its own.
--- Discover Summit http://bit.ly/NovationSummit"
NovationTV Summit Series
"-CALC- looks at how you can use the multiple outputs on our flagship polysynth, Summit, to manage sounds and your sound design. The video also takes a good look at how you can use the audio inputs to feed any external audio signals through Summit's synth engine and onto the FX.
With its multitimbral architecture and 16 voices of polyphony, Summit is like two Peaks in one instrument, enabling two completely independent patches to be split or layered across the keyboard, or switched between on the fly. And, that’s not the end of it: the addition of dual filters, greatly extended front panel controls, audio input and the same premium-quality five-octave keyboard introduced with our SL MkIII MIDI controller, put Summit in a creative league of its own.
--- Discover Summit http://bit.ly/NovationSummit"
NovationTV Summit Series
Polyend Tracker Sessions #2: "MLT - Cantaloupe" (feat. Medusa and Virus TI Snow)
Miltos Schimatariotis
Here is my next little song made for my Polyend Tracker series. This time, except for the constant presence of the Medusa, the Tracker is also accompanied by the Virus TI and some live keyboard playing with a sound from the Atom library by Audio Modern. In this track, I had a good chance to test the Tracker as a MIDI sequencer too, including both notes and CC messages, and the whole process is pretty straight forward. I have also upgraded the Trackers firmware to 1.1 which now features a reverb along with the delay. So there are more possibilities now for atmospheric tracks and better production overall.
After a few more Tracker Sessions I 'll probably start to also upload some walkthroughs (or tips&tricks etc). Let me know if you would be interested in something like that or if you have any other ideas. The Medusa sound design series will continue too but the song videos help me in that department because they give me ideas for new, "real world" patches.
It took a while to upload a new video but I recently did a small upgrade in video gear too. I 've got a very nice Olympus Em-10 MK3 and some lights, so I made sure to take a lot of shots in this video to get the hang of them 😄. Hopefully, there will be a noticeable upgrade in picture quality in my next videos too, so stay tuned!
Thanks for watching and feel free to leave your comments or questions!
My Polyend Tracker songs are also available in Bandcamp: https://mlt-music.bandcamp.com/"
Syntrx - First Industrial Noises
Wein Glas
"The shortest 'Unboxing' you have ever seen (I promise) and then I leave my gloves on and start to make first industrial noises with the brand new and rare Erica Synths Syntrx (no „on the run“, I promise)."
MAKEN0ISE One Function to Guide them All
MAKEN0ISE
"Sometimes it’s fun to take advantage of all the many control voltage sources in a modular synth and run them all over the place, controlling all kinds of things. But, as an experiment, what if we take just one control voltage source, and patch it to as many parameters as we possibly can?"
Sequential Prophet VS Vector Synthesizer (1986) Playing with the Random Sound Generator
RetroSound (c)2007-20 by RetroSound supported by UVI: http://bit.ly/retrosound-uvi
Sequential Prophet VS Vector Synthesizer from the year 1986 I use here the Random Sound Generator for making some Crime/ Horror soundscapes.
Digital waveforms + analog VCF and VCA
- 8 Voices
- 4 Oscillators per voice
- 96 preset waveforms + 32 user waveforms
- analog 24 dB/oct lowpass Curtis CEM3389 VCF
- analog VCA CEM 3360
- Arpeggiator
used by Whitesnake, France Gall, Icehouse, Fancy, John Carpenter, Dieter Bohlen....
RetroSound synthesizer demo videos since january 2007.
All is for free. If you like my work, so can you support me with a donation or a purchase of my music albums. Thank you!
Donations: https://www.paypal.com/cgi-bin/webscr..."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
