"Akai AX60 synth from 80', the keyboard fell down from a stand when some drunk shut down electricity on last gig and pushed keyboard stand, 2 keys are broken and we just replaced them on new ones, 5 slider caps on slider are lost. We turned the synth and it functions funky: all knobs, sliders, lights works, but keyboard produces some sort of background noise and on some patches all keys work, on others- some don't. It's not all the time, we turn it on and off and start to operate fine, but you shut it down and turn again-same problem. we don't know what's happened."
"World-renowned composer Hans Zimmer in collaboration with BMW sound designer Renzo Vitale developed a unique sound brand for BMW’s electric vehicles. BMW IconicSounds Electric adds another level of emotion to the BMW concept i4 and makes it audible using a world of unique sound.
The sound of the BMW Concept i4 achieves this to perfection, combining BMW's past and future into a seamless harmony of electric car technology.
There's no limit to the expression drivers can feel in the Concept i4. From driving sounds in ""Core mode"" to the more intense and pronounced sounds of ""Sport"" mode, there's a wide breadth of sound ranging from light, transparent, to even surprising with this concept vehicle.
Feel the sounds of the future and see the next generation of electric car technology today."
#sequentialpro3 #sequentialsynthesizer #analogsynthesizer
Sequential PRO 3 "Funky Fantastic Leads!"
Synthesizer Demo by Rik Marston
***Watch in HD!!*** **Turn It UP!** ***No Talking!!!***
The Sequential PRO 3 in action playing Funky Fantastic Leads!
This synth is an excellent LEAD synth. It should be on top of every
synth rig. My only gripe about it's design is the MIDI In & Out is
located in the center on the back of the synth. I use a Ultimate
Support Apex stand. Not able to use MIDI on my stand unless it's
on the very top of the rig. That is about the only issue I have with
the PRO 3. Very minor issue cuz I don't have to use that stand :)
An excellent purchase for any musician or studio, just remember
where the MIDI ports are located :)
Meteorite friends featured (but hard to see in this video):
2 Gold Basin Stone Chondrite meteorites!
Sending POSITIVE VIBES to YOU!!! ;)
"This one is in beautiful cosmetic condition and working 100%. It is ready to be played and needs nothing! This is an original Model D and not the reissue. Serial #4527 (built in 1974). It has had quite a bit of internal & cosmetic restoration and likely more than any other here on Ebay."
King Korg is a great analog modeling & sample-based dual engine beast
with lots of colours and overall beautiful sounds.
Anton Bakhtin & Nick Klimenko continuing cinematic preset series with 50 brand new handcrafted presets ready to go in your tracks!
"Cinematica vol.1" contains
Deep atmospheric & evolving pads
Bright Powerfull Strings + re-creations of Juno & CS-80 Synthesizers
Beautiful Plucks with deep reverbs
Massive Basses & Leads
Great cinematic Arpeggios using intuitive King Korg arp system
Great "Bladerunner 2049" preset right from "Sea Wall" episode by Hans Zimmer.
All the patches reacting on MW, velocity and can be added as favourites on your synthesizer.
Charge your analog modeling King with new inspirative sounds!"
The ambient wash is a sequence on the DSI Pro 2 going into Clouds. Freeze is switched in and out with a slow pulse wave, and LFOs from the Octocontroller modulate density and position.
The (sort-of) bass clarinet is the Roland 510, sequenced by Copper Traces Seek. Clocking is via Pico Logic, with a different logic triggering the ADSR on the filter, which is also opening and closing by a bit of S&H. I've done a few experiments where envelope and note gates happen on different beat divisions and interact unpredictably.
Digitalis is the genus that includes foxgloves, a dramatic wildflower always welcome in northern gardens."
Price excluding tax: 239€ - comes to $283.44. Pics with press release below.
"Midilooper is a device that listens to MIDI messages (control information about notes, dynamics and other parameters) and loops them in a similar way an audio looper would loop pieces of audio. However, loops of MIDI messages remain in the control domain, which means a lot of other processes can happen on top of them - timbre modulation, envelope adjustments etc.
Setup 1:
Juno 106 MIDI OUT into MIDI Looper MIDI IN
MIDI Looper MIDI OUT into Juno 106 MIDI IN
SYNC: Modular sends analog clock and reset into MIDI Looper via 3.5mm jacks
Listening to metronome from MIDI Looper
Setup 2:
Keyboard (Reface DX) MIDI OUT into MIDI Looper MIDI IN
MIDI Looper MIDI OUT into 1983 MIDI IN (modular)
1983 receives MIDI on 3 MIDI channels to control 3 modular voices
SYNC: Modular sends analog clock and reset into MIDI Looper via 3.5mm jacks
(Nerdseq sends MIDI to Reface DX MIDI In to control the sound engine, Local control on Reface DX is turned off)
Setup 3:
Roland SPD-SX (drumpads) MIDI OUT into MIDI Looper MIDI IN
MIDI Looper MIDI OUT into Roland SPD-SX (drums) MIDI IN - MIDI Channel 1
MIDI Looper MIDI OUT 2 into Microgranny 2 (glitch) MIDI IN - MIDI Channel 2
SYNC: OP-Z mini jack MIDI OUT (from OP-LAB Module) into MIDI Looper mini jack (MIDI) Clock IN
Listening to metronome from MIDI Looper
OP-Z plays chords and bass
Local control on SPD-SX is turned off
Setup 4:
Moog Sub Phatty MIDI OUT into MIDI Looper MIDI IN
MIDI Looper MIDI OUT into Moog Sub Phatty MIDI IN
MIDI Looper is in Free running mode (no clock needed)
Setup 5:
Keyboard (Reface CP) MIDI OUT into MIDI Looper MIDI IN
MIDI Looper MIDI OUT into Reface CP (e-piano) MIDI IN - MIDI Channel 1
MIDI Looper MIDI OUT 2 into Roland D-05 (pad) MIDI IN - MIDI Channel 2
Roland D-05 MIDI OUT to Make Noise 0-coast (arp) MIDI IN - MIDI Channel 3
SYNC: Roland TR-08 (drummachine) MIDI OUT to mini jack MIDI adaptor to MIDI Looper minijack MIDI Clock IN
Listening to metronome from MIDI Looper
TR-08 trigger out to 0-Coast Gate input
Reface CP Local control OFF
D-05 MIDI Thru ON"
"Bastl is more than excited to announce the Midilooper! Rather than being a sequencer, it is a device inspired by audio looper style workflow with a really fast, performative, single gesture interface.
Looping is a blazing fast way of music making and looping in the control signal domain is a key feature that allows for all remaining parameters of your device to be tweaked and modulated on top of the looped sequence... or MIDI CC looped!
Midilooper has been in development for over 3 years and several iterations of the control interface and connectivity have been extensively tested within the context of a live performance. It has the ability to bring a live setup or a studio to new life and make you explore your gear in a refreshing, hands–on manner.
Midilooper can be synchronised to MIDI or analog clock and it can also run on its own (tap tempo/free running). It has 3 voices that can each be assigned to a different MIDI channel, allowing it to control and loop 3 individual units of gear. Each voice can be individually recorded, muted, overdubbed, or cleared.
Midilooper also offers some basic processing of the recorded information: transposition, velocity locking and shifting, quantisation, shuffle, humanisation (random variations of velocity), adjusting the length of the loop, or doubling and halving of playback speed.
In addition, it features CV and trigger inputs for seamless integration with modular synths: reset, retrigger, velocity, and transpose. It can also be controlled with foot pedals.
Stay tuned to Bastl Instruments YouTube channel for more walkthrough videos. Price excluding tax: 239€
Shipping to dealers now.
Features:
• 3 independent voices (each has MIDI channel assigned) • overdub/overwrite
• transpose mode
• octave transpose
• quantize, velocity lock, shuffle, humanize • odd looplengths, time stretch
• mute, clear, erase
• one MIDI Input and two MIDI Outputs
• clock input (accepts analog clock or TRS MIDI Clock) • analog reset input
• metronome output
• CV input connectivity (transpose, velocity, re-trigger) • pedal control (record, clear, voice selection)
• USB powered
• adjustable divider/multiplier for analog clock"
