Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Tuesday, July 20, 2021
Kawai SX240
Sequential Prophet 10 Desktop Module w/ Original Box
Doepfer Monster case with modules
Note: links to listings are affiliate links for which the site may be compensated.
via these auctions
Lists of modules in each system case after the pics below.
via these auctions
Lists of modules in each system case after the pics below.
Akai AX80 w/ List of Factory Sounds
Yamaha WX11 & WT11 Wind Synthesizer, Electronic Wind Instrument
Twisted Electrons MEGAfm FM Synthesizer SN MFM1277
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
You can find demos of the MEGAfm in previous posts here.
12 Voice polyphonic
2 YM2612 FM chips
8 Algorithms
600 Preset memories in 6 banks
4 Voice modes (poly12, stereo / broadband6, special CH3 mode, 12 voice unison)
Stereo or mono output (1 chip per channel or both chips added)
3 LFO for modulating any parameter
7-Mode arpeggiator with transposable step sequencer in Sh-style
Vibrato with depth and rate
MIDI clock on all LFOs, ARP and vibrato
All faders / controls send MIDI
2 x 6.3 mm jack output
6.3 mm Stereo headphone output
5-Pin DIN MIDI input with MIDI channel learn and MIDI through / out
Brushed / anodised aluminium housing
Includes 9V DC power supply unit (centre positive)
via this auction
You can find demos of the MEGAfm in previous posts here.
12 Voice polyphonic2 YM2612 FM chips
8 Algorithms
600 Preset memories in 6 banks
4 Voice modes (poly12, stereo / broadband6, special CH3 mode, 12 voice unison)
Stereo or mono output (1 chip per channel or both chips added)
3 LFO for modulating any parameter
7-Mode arpeggiator with transposable step sequencer in Sh-style
Vibrato with depth and rate
MIDI clock on all LFOs, ARP and vibrato
All faders / controls send MIDI
2 x 6.3 mm jack output
6.3 mm Stereo headphone output
5-Pin DIN MIDI input with MIDI channel learn and MIDI through / out
Brushed / anodised aluminium housing
Includes 9V DC power supply unit (centre positive)
Roland TB-303 Bass Line Synthesizer w/ Colin Fraser MIDI
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Cosmetically seen better days, various cracks and chips in the case as pictured, but perfectly working 303 with Colin Fraser midibass fitted, comes with original carry case & manual."
via this auction
"Cosmetically seen better days, various cracks and chips in the case as pictured, but perfectly working 303 with Colin Fraser midibass fitted, comes with original carry case & manual."
SoC+FPGA Synthesizer
video upload by Laura Regan
"This is a demonstration of my final degree project for my Bachelor's Degree in Electronic Systems Engineering. For my project I designed a digital music synthesizer on a SoC+FPGA, the Zynq 7020, on a Zedboard development board. All audio synthesis and digital signal processing is performed in real time on custom hardware modules designed in VHDL using Xilinx Vivado.
The synthesizer includes the following modules:
- Numerically Controlled Oscillator
- ADSR envelope generator
- Numerically Controlled Amplifier
- Numerically Controlled Filter
- Low Frequency Oscillator
- Mixer
The synthesizer has a polyphony of 128 voices. The filter is a digital implementation of the famous Moog Ladder filter. Control of the synthesizer's modules is managed by the on-chip ARM processor. The processor also receives commands from the synthesizer's interfaces. A virtual interface was designed in Qt and a physical interface was designed using the on-chip XADC for reading the values of the interfaces dials. A MIDI interface PCB was designed to allow MIDI equipment such as keyboards to be connected to the synthesizer.
In the video the effects of multiple modules are demonstrated, the virtual interface was used to control the synthesizer and Digilent's WaveForms oscilloscope was used to view the synthesizer's output."
KORG: miniKORG 700FS Synthesizer Sounds Demo
video upload by Korg Australia
"Here's a little sound demo of the limited edition authentic revival of the miniKORG 700, the miniKORG 700FS. The revised miniKORG 700FS offers added functionality such as an arpeggiator, spring reverb and aftertouch. The miniKORG 700FS is a fully-realized analog synthesizer that was developed in conjunction with the original designer, Fumio Mieda."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
































