Because... Techno. Waldorf Blofeld + Tanzmaus + Cooper FX + Dark Time

video upload by alternatingbitmusic

Polivoks Pro sequenced via Doepfer Dark Time

video upload by alternatingbitmusic

"Just a simple sequence demonstrating the rich sound of the Polivoks Pro."

Midicake ARP - Pushing the Boundaries

video upload by midicake

"Testing Midicake ARP. 4 Arpeggiators, 32 beats per bar, 8 modulations at 300bpm."

See the Midicake label below for more.

First patch with only Frap Tools Eurorack Modules long Version

video upload by Tiefengrund

"Frap Tools Brenso, Fumana, Falistri, Sapel, Ustra and other."

Vaemi Shift Register

video uploads by Vaemi

via Vaemi

"Shift Register essentially stores the data in binary form, and it shifting the data in accordance with a clock signal reference. In fact, thanks to this feature, it is used for storing, adding, subtracting, multiplying, and dividing data in a computer. Multiplication and dividing are actually the results of the shifting process.

Shift Register is a module that is designed for Eurorack systems, and it can run between 0V-+5V. It runs with a clock signal. This way, all the data entered through data input is synchronized with the starting and ending times of the clock signal. This module is a dual and 4bit Shift Register module. It can be accepted as a 4-step sequencer. The jack on the module that types data is input.Even if you enter a CV signal or gate signal, the signal you will get from the outputs is a 5V gate signal. The first output, on the other hand, gives out exactly the same pattern you entered in the data signal, only a better-synced version with the clock,while synchronizing with the clock signal, it shifting the written patten to another output as the clock arrives. In fact, as a result, when you enter 16-note clock signals, you get a 16-note delayed version of the patten you typed from each output. If you use this module in the audio rate range, you can run it like an oscillator with clock signals that are hearable for human ears. In this way, while patching with square waves in Logic, you primarily get different phase degrees of the data (square wave) you entered.

The module also has a reset input. If you send a trigger or a gate to this input, Shift Register will delete all the data in its memory.

When you record data in the data input in the momentary flow and stop the clock signal, you will see that 4 steps, which is actually 4 bits of data stay frozen inside the module. At this point, if you redirect one of the outputs to the Shift Register's data input, and if you give the clock signal back again, the pattern will enter a 2-3-4 step loop according to the output that you use. This pattern will go on like this forever if you follow these steps.The pattern you recorded is probably out of phase in comparison to the clock signal; however, you can also select the phase of the pattern by starting the Shift Register at different times.

Another method is that you can enter the same clock signals in the second Shift Register because it is a 2-channeled Shift Register module. If you direct the 4th output of the 1st Shift Register to the data input of the 2nd Shift Register, you can extend the Shift Register up to 7 bits."

EMW SYSTEM-15 Analog Modular Synthesizer

video upload by EMW Synthesizers

L-1 Quad Discrete VC Equalizer / Resonator -- Oscillation Mode

video upload by Aleksei Laman

"All channels switched to Oscillation Mode (DIP switch).
Frequency modulated from v/oct CV.
Level modulated from ADSR."

A Quadrature Triangle Wave LFO Simulation, just for fun

video upload by Unrelated Activities

"Creating a quadrature triangle wave output with a basic Schmitt trigger and integrator LFO can be done with some logic and waveshaping, but this always involve dealing with transition clicks attenuation. Another approach is to employ a second LFO circuit receiving a small impulse from a zero cross comparator connected to the integrator output of the first LFO integrator. There will be no waveshaping here, therefore no clicks, but the two integrators need to be identical."

"Smalltown Boy" by Bronski Beat with Korg Volcas (FM, Keys, Modular, Sample)

video upload by Mattelica

"'Smalltown Boy' by Bronski Beat with the Korg Volcas (FM, Keys, Modular, and Sample) to a Roland VS880 to a Canon 6D + 17-40mm lens"

1970s Dubreq 350S Stylophone w/ Original Boa-Box" Case & Extras

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Included with the stylophone is the original "Boa-Box" case, warranty card, song book, user guide, and 12 inch instructional record."

CLICK FOR MORE »