Another Day, Another Mini Modular Test! ;-)

video upload by John L Rice

"Modcan Touch-Sequencer, 2hp LFO, and Mutable Instruments clones by Tall Dog Electronics: uPlaits SE, uBraids SE, and uploads SE."

Two New Modules from Bubblesound Instruments

via Bubblesound Instruments

First up we have the SeM20st.

The SeM20st is a stereo version of the first module bubblesound put out, the SeM20. It has become one of the classic filters in the EurorackWorld.The SeM20st is the most versatile analog stereo filter on the market today.

The inputs on the Left side are all normalized to the Right, so one input can be turned into a stereo signal.There is an Offset for the Left Cutoff, this allows a wider stereo field and is especially useful if the input is coming from a mono source.The CV inputs on the Left can also control the Cutoff and Resonance of the Right side.The Right side CV Cutoff pot is an attenuvertor, when it's at noon it's off, turn clockwise from noon the pot acts like a normal attenuator, gradually adding the CV to the Cutoff.When it's turned counter-clockwise from noon the CV is inverted, acting like an inverted ADSR.This can be used with a single LFO into the Left Cutoff CV to create a sort of ping-pong with the 2 sides, as the Cutoff goes up on one side it goes down on the other.

The Resonance section is exactly the same as in the SeM20, but with the Stereo version the Resonance is controlled by a VCA, allowing for CV control of the Resonance.The Resonance CV will work with either an LFO or an Envelope.

Outputs: Channel has 4 outputs available:
Low, Band, High and Notch Passes.
The Notch Balance pot sweeps from Low Pass to High Pass and can produce some really nice phasing.

width: 10HP

current draw: +45mA -35mA depth: 35MM

Next we have the SpringVerb

The SpringVerb is a classic analog Spring Reverb Driver with a few extras.

The input signal goes into a state variable filter that is capable of self-oscillation.Then the filtered signal goes to the reverb driver, into the tank and back to a Voltage Controlled Crossfader for a CV-able Wet/Dry.The switch under the filter select switch determines what goes into the "Dry" side of the Crossfader. It can either be pre or post filter.

There is a Voltage Controlled Feedback section as well as CV for the Cutoff Frequency and the Resonance of the filter section.

The Feedback does exactly what it says, it feeds the Post Tank signal back into the input section. It can go from very subtile to guitar and amp style feedback.

The Filter is very similiar to the SeM20, so the Resonance is aggressive.The input can be overdriven a little, depending on what the input is. Unlike the SeM20 it doesn’t really clip, but just like the SeM20 when the input is low and the Resonance is high most of what comes out is Sine waves.

Outputs: Filtered, Reverb Only and Mix

Tank:The SpringVerb comes with a medium decay, 3 spring tank and is compatible with many others.

width: 10hp

current draw: +43mA. -30mA

depth - 45MM with RCA cables plugged in

NONO MODULAR Copy & Shift

video upload by NONO MODULAR

No audio in this demo - just the UI. Note the ring colors represent and match the Track A-D buttons. He sets the step points for A, holds A down for a couple of seconds to copy, then preses B, C, and D to paste. He then tweaks B, C, and D separately.

http://nonomodular.com/

The Ultimate DUAL CIRCUIT Set

video upload by Gabe Miller Music

"I'm back with club friendly tech house / techno / electro live set, performed on the Novation Circuit Tracks and Rhythm."

Get my $5 sample pack: https://gumroad.com/l/gabeoneshots

Circuit Tracks only.(extended steps)

video upload by Morenook

Cursus Iteritas Alia wavetable oscillator from Noise Engineering

video upload by Noise Engineering

"Cursus Iteritas Alia is our take on a spectral/wavetable oscillator. Cursus Iteritas has long been regarded as the gentlest, most melodic Iteritas oscillator, but its Fold and Edge parameters can bring it the territory of aggressive and in-your-face sounds, too.

Cursus is available now: https://bit.ly/3HmzZG8

0:00 Overview
1:09 Panel and Controls
4:03 Patch: Metallic Lullaby
4:31 Patch: Sweet & Sour
4:56 Patch: 'Til Death
5:23 Patch: Foiled Again
5:48 Patch: Resonant March
6:16 Alia platform

Cursus Iteritas is a freerunning oscillator. Pair it with a VCA and a slow envelope for the perfect lead line, and try patching its pitch and modulation inputs with something like a ribbon controller or gesture module for expressive control.

The Daub/Four/Walsh switch selects the synthesis algorithm used to generate sounds. Center, Structure, Width, and Tilt control the harmonic structure of the oscillator, with a variety of interdependencies between controls. Edge and Fold add distortion and grit to the sound if things are a bit too gentle. We recommend starting out with Edge and Fold at minimum and the rest of the controls centered, then experimenting with the various controls.

Alia is a 10HP oscillator platform much like the Versio and Legio platforms. With Alia, we are pleased to bring back Cursus and Ataraxic Iteritas, as well as Manis and Basimilus. We've also released new voices on Alia: Debel and Incus.

Alia's interface is similar to the Iteritas modules but now includes an encoder for easier tuning, a dedicated Sub Out jack, a Hold button for freezing CV modulation, and a self-calibrating pitch input that expects -2V to +5V. Cursus has been designed to sound as close to the old versions as possible.

Like with our other platforms, if you own any Alia module, you can swap to any other Alia firmware for free by going to the Noise Engineering Customer Portal and connecting with the included USB cable."

MS Processing in Eurorack - using the Attenuverter Bank

video upload by LARIX ELEKTRO

"MS Processing is a way to manage the stereo image or to make some special FX, often used for mixing and mastering. The idea is to convert a stero signal (Left-Right) into 2 signals: Mid and Side. In that way, we can process differently the center and the side of the stereo. And after that, going back to a Left-Right signal.

This is something the new CONTROLE Attenuverter Bank can do very easly.
This is also an example of a complexe patch that the Attenuverter Bank can do.

Attenuverter Bank:
@http://www.larix-elektro.com/PRODUCT_...

Other modules used:
LARIX-ELEKTRO, RITOURNELLE CV Generator
AFTER LATER, Brook (X2)
DREADBOX Eudemonia
BEFACO Crush Delay"

Soft pop2 X Plinky patch from scratch #2

video upload by Meska

Part 1 here

"Quick patch from scratch with Plinky and Softpop2 , its my workflow for finding melodys ect

Thank you for watching.

My name is Meska of the statik collective . I've been making mostly "dark and expérimental" music for more than ten years now, i'v learn so much online, now it's time for me to share my knoledge, my exploration and this channel is a place to talk about the tools, sound design and techniques to make music with.

You can stream my albums and EPs at https://statikwave.bandcamp.com/

If you'd like to support the channel​ consider buying music from bandcamp ;)"

Glitch on the Floor (small synths + harp) | Jamuary Week 4 | 2024

video upload by Musical Miscellany (Poorness Studios)

"Continuing with my Jamuary series for 2024, I decided to do a glitchy improv using a random collection of instruments. The list includes: Error Instruments Acid Bee, Moffenzeef Jarmaggeddon, Dave Smith MoPho desktop, KORG KO-2 Kaossilator, Error Instruments Blind Noise Nano, & AKlot 15-string Harp."

#Jamuary 22nd 2024 "rusty crayons"

video upload by Captain Credible

"tryna wangle it out of the #novationcircuit and feeding the #kaosspad the scraps. #jamuary2024 #kaoss #growl #grungy"