Dtronics DT-DX sneak preview

video upload by Dtronicsmusic

"the Dtronics DT-DX
Based on the MiniDexed synthesizer."

DT 303 vs Xoxbox

video upload by Dtronicsmusic

"Basic demo of the Dtronics DT-303 Distortion for the TB-303 / RE-303 / XoXbox"

DT 303 vs Dinsync RE 303


"The Dtronics DT-303 is a distortion that fits perfect with a Roland TB-303 or clone. Giving it unique sound to your acid music.

he Dtronics DT-303 is not your ordinary distortion, It is not a clone or copy.
It gives you 3 blends that you can adjust and filter. Each of the 3 settings have minor changes in the frequency spectrum. The distortion knop allows you to spice things up from minor to overrated distortion. Use the filter knob to suppress those high frequencies. A volume knob is added to adjust the output level to your needs. A bypass knop allows you to switch back to the original sound quickly.
The DT-303 was designed to fit perfect next to your TB-303 or RE-303. With the connections at the back you will have no spaghetti wires hanging over your gear."

Dtronics Introduces DT-303 Distortion for the TB-303

Dtronics DT-303 vs Roland TB-303video upload by Dtronicsmusic

"Basic demo of the Dtronics DT-303 Distortion for the TB-303

The Dtronics DT-303 is a distortion that fits perfect with a Roland TB-303 Giving it unique sound to your acid music.

The Dtronics DT-303 is not your ordinary distortion, It is not a clone or copy.
It gives you 3 blends that you can adjust and filter. Each of the 3 settings have minor changes in the frequency spectrum. The distortion knop allows you to spice things up from minor to overrated distortion. Use the filter knob to suppress those high frequencies. A volume knob is added to adjust the output level to your needs. A bypass knop allows you to switch back to the original sound quickly.
The DT-303 was designed to fit perfect next to your TB-303 or RE-303. With the connections at the back you will have no spaghetti wires hanging over your gear."

Making a new Dtronics prototype..

video upload by Dtronicsmusic

"Today we make some new prototypes on our pick and place machine...

Close up overview of the Dtronics DT-RDX programmer for Yamaha Reface DX

Published on Oct 28, 2019 Dtronicsmusic

"Nice closeup of the Dtronics DT-RDX programmer.

The DX7 defined the synth sound in the '80s. The Yamaha Reface DX mobile mini keyboard puts the iconic sound of a 4-operator FM synth right in your hands,
Hardware Controller for Yamaha Reface DX

The Dtronics DT-RDX is a programmer for the REFACE DX
All Reface DX parameters are directly accessible through the hardware

Robust workmanship and reliable grip on the Reface DX
41 Buttons and 9 switches
MIDI In / Out
Includes power splitter cable (power supply via the ReFace power supply)
Dimensions: 49 x 18 x 8 cm
Weight: 1.1 kg"

Dtronics - Production of the final batch DT7 Programmers

Published on Jan 23, 2019 Dtronicsmusic

Dtronics DT7

"We started the final run of the limited edition DT7 programmer.
It can be used with the Yamaha DX-7 ( DX-1 DX-5 TX-802 TX-816)

The DT7 programmer is produced on our prototype line..

In the early 80's the Japanese engineers invented the digital synthesizer, known as the DX-7 the first portable FM digital synthesizer hit the market.

It was a great success followed, making it in practically every top 10 hit in the 80's and 90's.

The beast never got tamed, as the learning curve to operate it was so steep, people started using presets, and barely touched it's vast array of parameters.

At DTronics we have brought many MIDI solutions and even brought new life to the Roland JX-3 and Alpha Juno series through our dedicated programmers the DT-200 and DT-300.

Being one of the most powerful synths in the world we believe that a DX-7 programmer to explore the powerful array of parameters is a worthy addition to our product line.

DTronics presents:
The DT7 programmer for the DX-series synthesizers. The DTronics DT7 Programmer uses the same type architecture used in our DT-200 and DT-300 series, but on a massive scale!

Key features:
- The DT7 runs it's own software within it's own processors
- Firmware updates over MIDI
- Supporting different types DX-series
- Provides a knob for every parameter, no layers, no fuss!
- Easily adjust envelopes of the appropriate operator's Envelope generators, pitch settings, scaling...!"

DT300 production video

Published on Jul 16, 2017 Dtronicsmusic

"Take a look in to our kitchen..
See how the DT300 programmer is produced.

The Dtronics DT300 programmer is a programmer for the Roland MKS-50 and Alpha Juno."

Created a new manufacturing label for these. If you find any in the archives leave a comment in the post and I will add the label.

NAMM 2016 Dtronics Dirty Pi synthesizer ( Ploytec PL2 engine )

Published on Jan 21, 2016 Dtronicsmusic

"The Dirty pi synthesizer is a dirty mono/duo synth.
Based on the Ploytec PL2 chip, the Dirty Pi gives you full control over all the settings.

Come watch it at NAMM 2016 booth #5008 MODE MACHINES"

Dirty pi test 1

Dtronics DT-300 controlling redominator alpha Juno vst plugin

Published on Mar 28, 2015 Dtronicsmusic

No audio, but kind of cool to see and of course know this hardware controller is out there.

"Dtronics DT-300 controlling redominator alpha Juno vst plugin.
The dt300 is a pg-300 clone and can control the roland alpha juno and mks-50 over midi sysex. But it can also control the redominator alpha juno plugin."

Dave Smith DSM01 curtis filter with Dtronics TB-303 osc

Published on Oct 3, 2014 Dtronicsmusic

"First try with Dave Smith DSM01 curtis filter and Dtronics TB-303 osc."

Dtronics Digidrum, 80's style eurorack drum module

Published on Oct 3, 2014 Dtronicsmusic

"Dtronics Digidrum, 80's style eurorack drum module.

With a 80's soundset ( 8 sounds ). the samples are recorded with an Oberheim Prommer to get the right sound.

The unit also accepts home made sounds ( you have to put them in an serial eeprom or you can buy complete soundsets)
or you can place one original 4K eprom with your Linndrum / DMX sound.

-accepts original LINN / DMX etc eproms (2732 / 4K)
-accepts serial eeprom with custom sounds
-Sound can be tuned to the extreme (to get thos dirty strange sounds)
-only 6HP wide

More info soon here and on the Dtronics website."

dtronics NANO series

Published on May 11, 2014 Dtronicsmusic·6 videos

Dudes dancing with guitars.

"The Nano sync converts midi clock to sync pulses.
It has 2 Dinsync outputs that can individualy be set to 24 , 48 or 96 ppqn, and a jack sync output that can be used with arpeggiators or sequencers and it can be programmed from 24/127 ppqn up to 24ppqn.
It has low latency of less than 200 micro seconds.
A Led shows the current clock speed - 1/24 of clock frequency.
Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole

Average latency: less than 0.3ms

****************************************­*****
Nano Merge

Despite its small size and low price, it is an intelligent MIDI merger.
It has two MIDI IN ports and one MIDI OUT port. Both midi inputs are opto-isolated.
An indicator lamp lights when midi data is being received.
The Nano merger handles all MIDI message types, including System Exclusive and MIDI Time Code, and clock.
Channel Voice messages are normally transmitted in the order in which they were received.
Midi timing commands have higer priority.So if Note Data is received at channel 1, and a midi timing message comes in at channel 2, the timing message will be sent to the output as soon as possible, interrupting the note commands from channel 1, ensuring extreme low latency, and minor drift in midi timing.

Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole
Average latency: less than 0.3ms

****************************************­*****

Nano Thru

The Nano Thru is a 1-in 3-out MIDI Thru Box.
The Nano Thru provides additional MIDI Thru ports in a classic MIDI setup.
This way you will eliminate latency caused by daisy-chaining midi equipment.
All MIDI messages appearing at the In Port are sent unchanged to all three Thru ports.
The signal is cleaned by the hardware, by analyzing the data and completing lost data strings ensuring any signal scew is eliminated.
The Nano Thru is externally powered to ensure error free operation over long cables and has a low latency of max. 3 micro seconds.
A MIDI indicator LED flashes when MIDI data is received.

Power input: 9 DC, max 100mA. 2.1mm plug, + on center pole
Average latency: less than 3us"

Dtronics Teaser SID6

Published on Jun 12, 2013 Dtronicsmusic·9 videos

Cool Polysix style Polysid logo on the circuit board. I'm guessing this is a six voice SID from Dtronics, makers of various MIDI devices and the DT200 PG-200 clone. See the Dtronics label below for more.

New CYGNX Desktop Synth Video

Published on Oct 4, 2012 by Dtronicsmusic

"Fun with CYGNX LINN9000 and TR808"

Note the Mode Machines logo on the top left. You'll find some videos on one without the logo along with specs here. Note the white faced model as well.

Update: "The cygnx is a spacehardware design. Spacehardware is working on a new/improved version for the modemachines product line."

Dtronics MS06 Arpeggio sync

YouTube Uploaded by Dtronicsmusic on Feb 3, 2012

"Juno 60 and Poly61 arpeggio in sync with midi."

DtronicsP61 [MIDI Kit for the Poly 61 Video]

YouTube Uploaded by Dtronicsmusic on Aug 8, 2011

Dtronics DT-200, roland pg-200 clone for mks-30 and jx3-p

YouTube Uploaded by Dtronicsmusic on May 1, 2011

"Small video about the looks of the Dtronics DT200 programmer for the Roland JX3p and MKS-30. Available at http://www.dtronics.net
It shows the first prototype. actual product will have black knobs and lower switches.."

Dtronics Roland PG200 clone first proto test

YouTube Uploaded by Dtronicsmusic on Mar 29, 2011

"First test of the Dtronics DT200, a Roland PG-200 clone for JX3p and MKS-30.
Used on a MKS-30.
more info soon...."

Installing the Dtronics Midi to DCB converter for the Roland JUNO 60

YouTube via Dtronicsmusic | December 04, 2010 |

"Installing the Dtronics Midi to DCB converter for the Roland JUNO 60"

Roland Juno 60 midi sync to arpeggio

YouTube via Dtronicsmusic | December 16, 2010 |

"Some info about how to sync the juno 60 arpeggio clock to midi with the dtronics mdcb60 midi to dcb converter for the juno 60."