MATRIXSYNTH


Friday, February 19, 2010

A close up look at the Roland TR-909 part 1


YouTube via phono1337
"Here's part one of a close up look at the Roland TR-909.

More info at http://www.dinsync.info"

A close up look at the Roland TR-909 part 2

FORMANTA RHYTHM FRET NECK RARE SOVIET USSR GUITAR

via this auction
"FORMANTA RHYTHM FRET NECK GUITAR — INCREDIBLY RARE VINTAGE SOVIET GEAR.
LOOKS REALLY LIKE A CRAZY-SPACE-GUITAR ;]

The unit has one connection plug - Soviet 5DIN. As far as I know it used as an addition to FORMANTA UDS and MARSH UDS drum sets. Unfortunately I don't posess any of these so I cannot test the unit anyhow. It has 7 buttons on front side and 2 on the back. According to manual while tapping the "SPHERIC THING" the unit sends trigger commands to the control module. Probably it can trigger any drum machine or kinda. I cannot know that for sure, sorry..."






Frostwave Fat Controller step sequencer midi CV

via this auction. See the seller's other items for more.

"The Fat Controller has independent gate and control voltage (CV) outputs for both channels. The sequencer can be synchronized with a midi clock or din sync signal using the MIDI IN and DIN IN inputs. The MIDI OUT provides quantized CV A notes for midi instruments. The sequencer has 7 types of buttons and sliders. Each type is outlined below. Specific types will be explained in following sections.

NOTE SLIDERS:
The position of these sliders determines the note to be played or voltage level output.

CONTROL BUTTONS:
The Control Buttons play, pause and reset the sequencer.

SEQUENCE KNOBS AND SWITCH:
The knobs control the slide time, gate time and internal tempo while the switch sets the channel B range.

FUNCTION BUTTONS AND LED's:
The function buttons are use to select the function you wish to change.

CHANNEL BUTTONS AND NOTE FLASH LED's:
The Channel Buttons select the channel you wish to change (note some functions ignore the channel selection). The channel LED's are 'on' for the current channel selected. Every new note played will flash the LED on the channel it is played.

GLOBAL BUTTON AND GLOBAL DISPLAY:
The Global Button selects the global mode and the display shows the status of the global function that is selected. To select a global function use the modifier buttons.

MODIFIER BUTTONS AND LED's:
The Modifier buttons change the corresponding note of the currently selected function. (e.g. adding a slide on a particular note). When in Global Mode the modifier buttons are used to select and change a global function."

Weevil Techno - Bugmodular, Machinedrum, Highly Liquid MPA


YouTube via darenager http://highlyliquid.com/kits/mpa/

"Quick jam testing out some new modules and the highly liquid MPA.

The MD is sending pulses and CV's to the modular via the MPA, modules used:-

Bugbrand Syn1, CTL1, PRC3, DD3, ENV1, PRC2
Blacet VCA, EG"

New Moog Taurus 3 Site

http://www.taurusbass.com/

Sent my way via Marko and via Chris Stack of Moog Music.

Moog Taurus3 Microsite

Modded ARP Odyssey


via Frodebeats

"Arp "The Norwegian" Odyssey is not your everyday Oddy. It has 3 oscillators, The third is from an early Arp 2600. It also has a Centaur filter, the 4035 filter, 4023 filter, 4075 filter and all the mods in the world."

You'll find more pics and info here and audio here.

Bliptronome v2 w/ ADCs complete! - Bliptronic to Monome Conversion


YouTube via waitforVBLANK. follow-up to this post
"The final working version of the Bliptronic 5000 hacked into a low cost Monome clone.
with Bliptronome V2 firmware
more info at http://www.straytechnologie..."

Nuby reverb box for the gameboy


YouTube via RustyNex
"this is a reverb or echo generator i built for my gameboy. it is made from a nuby amplifier. the insides have been taken out and fitted with the reverb circuit as well as a 1/4" jack socket and power regulator to step down the 9v battery to a steady 5v.

the red dial controls the volume of the reverb, the blue controls the duty cycle,"

Richard Lainhart - Upcoming Performances and Record Release

"›› Feb 27 : Performance, films and workshop at Trenton Area Festival of Electronic Arts
Richard performs live with his Buchla 200e/Haken Continuum system and gives a workshop on Digital Visual Arts. Grounds For Sculpure, 18 Fairgrounds Road, Hamilton, New Jersey www.fea-trenton.com

›› Mar 6 : Performance with films at One Thousand Pulses
Richard performs live with his Buchla 200e/Haken Continuum system at this home concert series. www.onethousandpulses.com

›› Two new disks released
Two disks of RIchard's early Moog works have been released by VICMOD Records — "The Wave-Sounding Sea" and "The Course of the River." vicmod.net"

http://www.otownmedia.com/

Roland CSQ600 CV Sequencer

CSQ600 for sale from Oli Larkin on Vimeo.


via this auction

PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH