The MFOS NOISE TOASTER In Space

YouTube ublished on Aug 22, 2012 by theraywilsonshow

"Multi-track recording using MFOS NOISE TOASTER for all sounds and SONAR Producer Edition for reverb and delay. Made in a semi musique-concrete way using wav file snippets instead of tape. The background drones are all real time throughout. It is a low frequency ramp synced to the LFO and I'm tweaking the vco freq knob to accentuate sync harmonics. The VCO then goes through the voltage controlled low pass filter whose cut-off frequency is about half way up. If you want to build a noise toaster go here"

Univox Piano Keyboard Synthesizer Storage / Travel Gig Bag

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"A LIKE NEW Univox Piano Keyboard Synthesizer Storage / Travel Gig Bag

Super Clean Inside and Out

This item comes Old Stock of a Piano and Organ Dealer

This is a High Quality bag Made in Italy during the early 70's

This Bag in this condition truly is a RARE find today.

Bag measures 41 in. long by 10 in. high and 4 in. thick.

These were used for the Univox Compac Analog Synth – Keyboard - Piano Line

Use it for your Univox Piano Keyboard Synthesizer or any other Music Gig gear you can fit in it!

Item does show signs of Shelf Wear as seen in Photos"

CLICK FOR MORE »

WMD Triple Bipolar VCA

"Intoducing the WMD Triple Bipolar VCA, the input side expansion for our Phase Displacement Oscillator. This module provides dedicated inverting/polarizing/bipolar amplitude modulating inputs normaled to the Phase Modulation inputs on the PDO.

A bipolar VCA is like a normal VCA when operated with positive control voltage. But when using a negative control voltage, the output will swing back past zero amplitude and invert the signal coming out. This produces deeper modulation than a normal VCA.

The Triple Bipolar VCA is also designed to be used as a standalone module, it does not require the PDO to operate.

Features

Three Bipolar VCAs
Normaling to PDO
Linear Response
Bipolar Attenuator for CV
Mix Output Sums All Three VCAs
Bi-color Signal LED
"-" Input for Crossfading
Skiffable PCB Design
8 HP
+80mA/-75mA Current Consumption

Controls and I/O

+ In - This is the normal input for each VCA channel. It drives the inverting side of the Bipolar VCA. These inputs are normaled from outputs on the PDO.

- In - This is the second input for the VCA channel. Normaled through this jack is the inverted signal from the + Input. Plugging in here converts the channel from a Bipolar VCA to a crossfader, blending between the + and - inputs. When in crossfade mode, both inputs and the output are non-inverted.

CV - This input jack drives the CV knob. It can handle unipolar or bipolar signals.

Out - This is the output of each VCA channel. They are normaled to the Phase Modulation inputs on the PDO.

Bias Knob - Sets the manual gain for the VCA. Centered will have a zero output in bipolar mode, and 50%/50% of both + and - inputs in crossfade mode.

CV Knob - This knob is a bipolar attenuator for the signal applied to the CV jack. Spin clockwise from center for positive CV interactions, counterclockwise to invert the CV.

Mix Out - This output jack mixes the signals from each VCA."

via WMD

Modulations for Bob

YouTube Published on Aug 22, 2012 by experimentalsynth

"Thinking about Bob Moog on the anniversary of the founding of the Bob Moog Foundation, so I cranked up some synths and modulated some filters in his honor. www.moogfoundation.org"

Circuito Eletrônico I - the first Brazilian Synth Meet JAM

YouTube Published on Aug 22, 2012 by WearEarplugs

"Participants of this synth meet jamming by the end of the day.

Appearing in this video:
- André Dessandes (playing the Moog Concertmate MG-1)
- Paulo Beto (playing the ARP 2600)
- Pane Tone (playing his DIY instrument)
- Seth Zahn (playing the Serge)"

SSF Quantum Rainbow as Brush Percussion

"A short demo using the Quantum Rainbow as brush percussion. Only one instance of each color noise is utilized; leaving the other outputs available for other noisy tasks.
You hear the raw noise of the QR processed only though VCAs modulated by various envelopes."

Qrdemo2-Brush kit by Steady State Fate

Fisheye Euroraction

Click the pic for the full size shot. This one comes from the guys behind the Samplephonics Circuit Malfunction Modular Sample Set (previously posted here). Intellijel Cylonix steals the show.

1 A.M. Synth Jam (Nanozwerg, MFB 522, Kaosspad, MicroKorg, etc.)

YouTube Published on Aug 22, 2012 by flx04

"It's l.a.t.e. X-)

Gear in this video:
- MFB Nanozwerg & 522
- MicroKorg
- Kaosspad Quad & Kaosspad Mini
- Electribe ER-1
- Roland U-110
- Standuino fraAngelico
- Novation A-Station
- Akai APC20

If you have questions or comments, feel free to write them underneath the video or send me a message :)


----
Filmed with a Canon Rebel t2i (550D) and a GoPro HD Hero."

MORPHS - FM organic morphs with the Jolymod 3

YouTube Published on Aug 22, 2012 by RecoHead

Buffre Control Template for iPad Lemur

YouTube Published on Aug 22, 2012 by PeffTV

"A little demo of using the Liine Lemur iPad app with Buffre Beat Repeater Rack Extension. Lemur template is available here: http://peff.com/buffre/examples/buffre_template1.3.2.jzml.zip

This is still a work in progress, and any constructive feedback is welcome!"

iTunes:
Lemur - Liine
iPads on eBay