Tuesday, March 11, 2014
Filter Ping Synth Jam with the MicroBrute & Eurorack
Published on Mar 11, 2014 The Tuesday Night Machines·92 videos
"The MicroBrute sequences and clocks the Eurorack. Lots of pinged filter sounds using a Klangbau Prototype and drums from the Ladik Twin-T drum module. Subscribe: http://www.youtube.com/subscription_c...
Questions or comments? Go ahead and post them below! :) Thanks for watching!
MORE INFO:
Gear used in this video:
- Eurorack Modular Synthesizer (with Vermona qMi, Malekko Wiard Anti-Oscillator, Klangbau VCDO, Ladik Twin-T, Intellijel, Koma Kommander, Sound of Shadows, Plague Bearer, Ataraxic Translatron, Voice of Saturn VCF, etc. see: http://www.modulargrid.net/e/racks/vi...)
- Arturia MicroBrute (analog synth)
- Zoom R16 (recording & mastering)
Filmed with a Canon EOS 550D (Rebel t2i)."
LINKS:
GET MY ELECTRONIC MUSIC AT BANDCAMP:
http://nightmachines.bandcamp.com
FOLLOW ME ON TWITTER:
http://twitter.com/Flixxx
Sequential Circuits Prophet 5 SN 6240 Rev 3.3
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Sequential Circuits Prophet 5 SCI Serviced New Bushings Analog Synthesizer 3.3"
via this auction
"Sequential Circuits Prophet 5 SCI Serviced New Bushings Analog Synthesizer 3.3"
MFB MICROZWERG
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"* semi-modular analogue synthesizer
* dual oscillator, dual multimode-filter
* separate inputs/outputs for both filters
* 18 patch connections in signal chain
* two LFOs with „One Shot“-function
* CV/Gate and MIDI control
The two oscillators have the four waveforms triangle, sawtooth, square and spike. VCO 2 instead of the spike has a noise generator. VCO2 can be detuned about plus or minus one octave compared to VCO 1. About a patch connection can be the oscillators sync with each other. In addition, the signal can be tapped off separately from VCO 2 can be used to filter modulation.
The two 12-dB-state-variable multimode filter feature of the operating modes low, band and high-pass and notch (bandstop). The filters are connected in series, thus with the same mode of operation results in a greater slope. This value is variable, since the two cutoff frequencies can be shifted via Space-controllers against each other. With the combination of low-and high-pass results in a band-pass with variable width and separately controllable resonances. About a patch connection, a parallel connection of the filter is possible. Then two offset bandpass filters, a notch filter with variable width or a low-or high-pass with projecting bandpass can be realized. The response can be regulated for both filters up to self-oscillation. The cutoff frequencies are jointly regulated or controlled by envelope. They also can be moved on the Space controls against each other. The modulation via LFO or the mod input acts together either on filter 1 or both filters.
via this auction
"* semi-modular analogue synthesizer
* dual oscillator, dual multimode-filter
* separate inputs/outputs for both filters
* 18 patch connections in signal chain
* two LFOs with „One Shot“-function
* CV/Gate and MIDI control
The two oscillators have the four waveforms triangle, sawtooth, square and spike. VCO 2 instead of the spike has a noise generator. VCO2 can be detuned about plus or minus one octave compared to VCO 1. About a patch connection can be the oscillators sync with each other. In addition, the signal can be tapped off separately from VCO 2 can be used to filter modulation.
The two 12-dB-state-variable multimode filter feature of the operating modes low, band and high-pass and notch (bandstop). The filters are connected in series, thus with the same mode of operation results in a greater slope. This value is variable, since the two cutoff frequencies can be shifted via Space-controllers against each other. With the combination of low-and high-pass results in a band-pass with variable width and separately controllable resonances. About a patch connection, a parallel connection of the filter is possible. Then two offset bandpass filters, a notch filter with variable width or a low-or high-pass with projecting bandpass can be realized. The response can be regulated for both filters up to self-oscillation. The cutoff frequencies are jointly regulated or controlled by envelope. They also can be moved on the Space controls against each other. The modulation via LFO or the mod input acts together either on filter 1 or both filters.
ROLAND JSQ-60
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"MEMORY CAPACITY:
Approx. 2000 steps (in single notes)
FRONT PANEL:
Mode Switch (PLAY ONLY, LOAD / PLAY, TAPE)
Metronome Level Switch (HIGH, LOW, OFF)
Tempo Knob ( Quarter note = 40 to 220)
Tempo Indicator
Reset / Tape Verify Button
Reset / Tape Verify Indicator
Load / Tape Load Indicator
Stop Button
Play / Tape Save Button
Play / Tape Save Indicator
Repeat Play Switch
Memory Consumption Indicator (25%, 50%, 75%, 90%, FULL)
Load Mode Selector Switch
Real Time ————- 4 / 4, 3 / 4, OVER DUB
Step Load ————- Eighth note, Eighth note triplet, Sixteenth note
Load Mode Selector Indicator
Real Time ————- 4 / 4, 3 / 4, OVER DUB
Step Load ————- Eighth note, Eighth note triplet, Sixteenth note
Tie Button
Rest Button
Measure End Button
Power Switch
Power Indicator
REAR PANEL:
DCB Connector
LOAD Jack (Tape Interface)
SAVE Jack (Tape Interface)
SYNC OUT (DIN) x 2
PATCH SHIFT OUT Jack
PATCH SHIFT IN Jack
START / STOP Jack
DC 9V IN (PSA Adaptor) Jack
Memory Data Keyboard (DCB), Patch Program Selection (DCB),
Patch Shift (DP-2)"
"MEMORY CAPACITY:
Approx. 2000 steps (in single notes)
FRONT PANEL:
Mode Switch (PLAY ONLY, LOAD / PLAY, TAPE)
Metronome Level Switch (HIGH, LOW, OFF)
Tempo Knob ( Quarter note = 40 to 220)
Tempo Indicator
Reset / Tape Verify Button
Reset / Tape Verify Indicator
Load / Tape Load Indicator
Stop Button
Play / Tape Save Button
Play / Tape Save Indicator
Repeat Play Switch
Memory Consumption Indicator (25%, 50%, 75%, 90%, FULL)
Load Mode Selector Switch
Real Time ————- 4 / 4, 3 / 4, OVER DUB
Step Load ————- Eighth note, Eighth note triplet, Sixteenth note
Load Mode Selector Indicator
Real Time ————- 4 / 4, 3 / 4, OVER DUB
Step Load ————- Eighth note, Eighth note triplet, Sixteenth note
Tie Button
Rest Button
Measure End Button
Power Switch
Power Indicator
REAR PANEL:
DCB Connector
LOAD Jack (Tape Interface)
SAVE Jack (Tape Interface)
SYNC OUT (DIN) x 2
PATCH SHIFT OUT Jack
PATCH SHIFT IN Jack
START / STOP Jack
DC 9V IN (PSA Adaptor) Jack
Memory Data Keyboard (DCB), Patch Program Selection (DCB),
Patch Shift (DP-2)"
Yamaha CS20M SN 3200
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Monophonic analog synthesizer released in 1979...
The CS-20M features 2 VCOs with a 6-octave range and 3 waveforms. The VCA contains an extra sine-only oscillator, and a white noise generator is also included.
Like on the other early CS-series synths, a resonant 12dB/octave multimode VCF is available as the filter. It is switchable between high-, low- and band-pass (the last being 6dB/oct). The VCF contains its own ADSR envelope generator plus controls for cut-off and resonance.
The single LFO can be used for PWM. An internal memory is available, holding up to 8 user programmable patches. Other features include brilliance control, portamento, pitch bend, glide and glissando. For external control there is a CV/gate interface."
via this auction
"Monophonic analog synthesizer released in 1979...
The CS-20M features 2 VCOs with a 6-octave range and 3 waveforms. The VCA contains an extra sine-only oscillator, and a white noise generator is also included.
Like on the other early CS-series synths, a resonant 12dB/octave multimode VCF is available as the filter. It is switchable between high-, low- and band-pass (the last being 6dB/oct). The VCF contains its own ADSR envelope generator plus controls for cut-off and resonance.
The single LFO can be used for PWM. An internal memory is available, holding up to 8 user programmable patches. Other features include brilliance control, portamento, pitch bend, glide and glissando. For external control there is a CV/gate interface."OSCar Oxford Synthesiser Company
Vintage Oberheim STRETCH DX SN D32636
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Stretch adds MIDI and 4 or more extra sounds among other extra features. This one is loaded with "electric kick" which sounds 909'ish, Congas, Tambourine, Side-Stick and also a kind of gunshot/clap sound.
The main unit contains the original factory soundset, which is very similar to the DMX, in fact having owned the DMX and this I have to say I prefer the DX sounds.. they are crisper and more punchy to my ears.
All sounds are externally tuneable(unlike the DMX) and have their own separate output!"
via this auction
"Stretch adds MIDI and 4 or more extra sounds among other extra features. This one is loaded with "electric kick" which sounds 909'ish, Congas, Tambourine, Side-Stick and also a kind of gunshot/clap sound.
The main unit contains the original factory soundset, which is very similar to the DMX, in fact having owned the DMX and this I have to say I prefer the DX sounds.. they are crisper and more punchy to my ears.
All sounds are externally tuneable(unlike the DMX) and have their own separate output!"
Analog Craftsman 5U Dual Wasp State Variable Analog Filter
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is a brand new dual Wasp state variable analog filter hand built in the USA by analog craftsman. The panel is based on the original design of the EDP Wasp keyboard synthesizer (the picture of the original wasp in this posting is just for reference and is NOT included in this auction). This module uses NOS Harris 3080 OTAs. The main output is switchable between LP, BP, and HP. There is also a separate output for the notch filter (as the original Wasp didn't have this). Also features CV input attenuator and a variable distortion circuit on each filter. The output of the A side is normalled to the input of the B side so you can use the two filters in series without additional patching for some VERY drastic timbres. If you know the Wasp filter, you know it can scream.
Again, this is factory new, fully tested and ready to ship. Also remember it is TWO discrete filters in one module, which is reflected in the price. There is no commercially available 5U build of this so here is your chance to own a custom build of one of the most unique and historic analog filters."
via this auction
"This is a brand new dual Wasp state variable analog filter hand built in the USA by analog craftsman. The panel is based on the original design of the EDP Wasp keyboard synthesizer (the picture of the original wasp in this posting is just for reference and is NOT included in this auction). This module uses NOS Harris 3080 OTAs. The main output is switchable between LP, BP, and HP. There is also a separate output for the notch filter (as the original Wasp didn't have this). Also features CV input attenuator and a variable distortion circuit on each filter. The output of the A side is normalled to the input of the B side so you can use the two filters in series without additional patching for some VERY drastic timbres. If you know the Wasp filter, you know it can scream.
Again, this is factory new, fully tested and ready to ship. Also remember it is TWO discrete filters in one module, which is reflected in the price. There is no commercially available 5U build of this so here is your chance to own a custom build of one of the most unique and historic analog filters."
Solina String Synthesizer (ARP Explorer I) Front Panel
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Up for sale is a (1) very rare Solina (ARP) Explorer I front panel. It was part of a Solina C112S organ. The front panel circuit is the same as an ARP Explorer I and is in good condition, the sliders and switches are clean. The vco board is a 4027-1 version (same as in the ARP 2600) and the vcf board is a 4075-003 Rev. A version (same as in the ARP Odyssey MKII). Notice that the knobs on all sliders are missing. We sell this front panel with boards as-is, for spares or parts."
Pics of the inside below.
via this auction
"Up for sale is a (1) very rare Solina (ARP) Explorer I front panel. It was part of a Solina C112S organ. The front panel circuit is the same as an ARP Explorer I and is in good condition, the sliders and switches are clean. The vco board is a 4027-1 version (same as in the ARP 2600) and the vcf board is a 4075-003 Rev. A version (same as in the ARP Odyssey MKII). Notice that the knobs on all sliders are missing. We sell this front panel with boards as-is, for spares or parts."
Pics of the inside below.
CRUMAR TRILOGY KEYBOARD SYNTHESIZER SN 00178
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
