Still of the Night (Secret of Mana) 聖剣伝説2 浄夜

Published on Feb 20, 2015 Steven Morris

Still of the Night
cover by Steven Morris
from Secret of Mana (SNES) 聖剣伝説２
Written by Hiroki Kikuta (菊田裕樹)
Friday, February 20 2015

Instruments/Sounds:
Rhodes Mark II Piano - Lead (run through pedal effects)
Fender Precision Bass
Epiphone Acoustic Guitar - Rhythm
DSI MoPho - Pad w/ Moog CV Pedal Controlling Filter Cutoff, MIDI Controller for Eurorack
Korg MS2000B - Rhythmic Pad / MIDI Controller for TX81Z
Glockenspiel - Lead
Eurorack Modular Synthesizer - Tomita's Whistle
Yamaha TX81Z - Pad

TX81Z Patches: (Layered with many MS2000B patches)

CLICK FOR MORE »

Moog Prodigy Restoration by GOLT !

Published on Feb 19, 2015 GOLT !

With Moog Prodigy SN 1321

Playlist:
Moog Prodigy Restoration (Part 1) - Bad solder joints
Moog Prodigy Restoration (Part 2) - The Potentiometers
Moog Prodigy Restoration (Part 3) - Recapping and replacing components
Moog Prodigy Restoration (Part 4) - Cleaning the panel, mod wheels and wood staining.
Moog Prodigy Restoration (Part 5) - Calibration

Stepper Acid x0x Jam

Published on Feb 20, 2015 Transistor Sounds Labs

"Here's Nina having a quick jam on some Stepper Acids, x0x-heart, M303, Frequency Central Meth Amp and Tiptop drum modules."

Roland SH-1 & Eventide Space

Published on Feb 20, 2015 DreamsOfWires

"Someone here recently asked me which of my synths was my favourite - I'd probably say the Roland SH-1, followed by the Micromoog perhaps. This is a re-recording of something I uploaded 3 years ago, and I initially posted this on my other channel 'tomorrowthecure', but since so few find that channel I thought I'd upload it here too. The outdoor footage is from the highlands of Scotland, the camera was old, and youtube compression has made it look even worse, but the the sounds and images are connected in my mind, so there it is."

Korg Volca Bass Osc Volume Mod Hack - How to full instructions!

Published on Feb 20, 2015 Darren Glen

Demo video for this mod here.

"NOTE:DO THIS AT YOUR OWN RISK! I WILL NOT BE HELD RESPONSIBLE FOR YOUR OWN DAMAGE TO YOUR UNIT.

Here you will find full instructions on how to mod your Korg Volca Bass to add separate level control for each of the 3 oscillators as well as a variable drive/distortion control!"

Korg Volcas on eBay

New ADDAC702 Dual Voltage Controlled Filter

Published on Feb 20, 2015 ADDAC System

"Here's our first Voltage-Controlled Variable Filter, inspired by the original MS-20 filter.

This module features:
.Two independent filters, a High-Pass and a Low-Pass with dedicated audio inputs and outputs.
.Besides individual outputs the HP and LP are also sent to a voltage-controlled Mix between the HP and LP filters.
.Both Cutoff and Resonance are voltage-controlled with dedicated cv attenuator pots.
.Switch for selecting between normal cutoff behaviour and an adjustable Smooth circuit to simulate a vactrol behaviour for cutoff control.
.Switch for setting filters Filters in Parallel, independent, or Series: HP into LP.
.Inspired by the Oscar synthesizer we added a Coupling switch to tie the HP Cutoff control to the LP Cutoff control, in this case the LP cutoff controls act as an offset from HP setting.
.Three position switch selects different resonance clipping paths: diodes / no clipping / leds.
.Both filters features a post Distortion/Fuzz circuit that adds extra harmonics adds an even deeper growl or extra gritiness to it.
.All audio outputs HP, Mix and LP feature a switch for choosing phase output, allowing additive or subtractive mixes.
.Three Leds monitor the amplitude of the three outputs: HP, Mix, LP."

patch autogénératif 1,02

Published on Feb 20, 2015 DavidH

http://malekkoheavyindustry.com/

DSI Pro2 Custom Patches

Published on Feb 20, 2015 Elpiulas

Dave Smith Pro 2s on eBay

KOMA Elektronik Komplex Sequencer: MC-202 Jam

Published on Feb 20, 2015 KOMA Elektronik

"Here, we are controlling a Roland MC-202 with the Komplex Sequencer. The MC-202 runs through a KOMA ELEKTRONIK BD-101 pedal. The Komplex Sequencer also clocks the Korg Volca Beats. Sequencer A of the Komplex Sequencer controls the CV/Gate of the MC-202, and Sequencer C CVs the Delay Time of the BD-101. The clocks of all sequencers are patched together. In the second half of the video, Sequencer B CVs the Sequencer Start Point of Sequencer A, while Sequencer D CVs the Transpose function of Sequencer A. The Sequence Length, Play Mode and Division are changed by hand to further complicate the pattern playing. Feel it!"

Synth Tech - Quad VCA Design

Published on Feb 20, 2015 shiftedphase

"In this video the Dintree D100 Quad VCA circuit which uses the SSM2164 VCA chip. You can download the schematic from: www.dintree.com"