Roland SH 01A Midi Editor / Controller - VST / Standalone-

Published on Nov 5, 2017 mller30161

"You can buy it on my homepage:
https://sh-01a-midi-editor.jimdo.com

Price: 5,90€

The "SH-01A Midi Controller / Editor". The controller for the Roland Boutique Synth SH-01A.

It is possible as VST and Standalone for PC 32/64 Bit and Mac as VST, AU and Standalone.
The „SH-01A“ parameters can be automated, they can be stored in your Project.
You can safe your sound on the SH-01A Synth or as VST Presets (..fxp) in the DAW.
The editor gives you direct access to the hidden parameters."

Social Entropy Engine - Polyphonic Sequencing

Published on Nov 3, 2015 luss

"Got my Engine this week and i'm realy happy with it! This video just shows the different ways to record a polyphonic sequence into the sequencer.
1. Chord memory per step
2. Realtime recording
3. Programming each pitch per step separate

Drums - Korg Volca Beats
Chords - Roland Juno 106, Strymon Blue Sky"

Yamaha Reface DX & Eventide Space

Published on Nov 5, 2017 3rdStoreyChemist

"Reface DX synthesiser through the Space reverb. Delay and modulation effects are the DX's onboard effects.

No further processing except normalisation."

Buromaschinen | Anticube | An ode to Fez.

Published on Nov 5, 2017 buromaschinen

"It's a rainy sunday so here's a little single pattern homage to one of my favourite games ever, Fez, and it's majestic soundtrack by James Vreeland, aka Disasterpeace.

Monomachine is the main sequencer and synthesizer with 5 leads and one bass, machinedrum takes care of crunchy percussions, analog4 drives the power pads, big sky delivers the biggest sky.

Bonus thunderstorm in the background."

Roland Juno-60 w/ MIDI - Beautiful Condition

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

ROLAND Rhythm Composer TR-808 SN 051888

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

VINTAGE ROLAND CR-78 CompuRhythm Drum Machine SN 842026

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is a classic piece of music history! A vintage Roland CR-78 CompuRhythm. This machine is in good working , it has been professionally serviced in the last couple months. Please see the end of listing for details on work done. The machine body is also in good condition- some wear to corners and 1 missing knob. Both details shown in up close pictures.

Service Description:
1. Cleaned up circuit board.
2. Re-capped both main cards as can caps leaking
3. Replaced corroded trigger connector, driver transistors, and resistors as originals were not accepting solder.
4. Wires added to bridge all traces between replacement connector pins and driver signals.
5. Cleaned other connectors and got all sounds to work from both the stored patterns and the programmer
6. Replaced frayed power cable with 3 pin grounded type
7. All functions working."

CLICK FOR MORE »

Roland Jupiter 8 classic vintage analogue poly synth

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland MC-202 MicroComposer, Analog Synth Sequencer SN 340400

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

The blue buttons appear to have gone green. Give it an interesting look.

"Great little analog synth with built in sequencer, it's basically a SH-101 synth but it has a sequencer that can add accent and slide (just like an TB-303).
All pots and sliders work fine with no crackle or problems apart from the square wave slider on the source mixer, the sound doesn't begin to fade in until the slider is moved about 20% of its length. It's not really been a problem for me but I thought it needed to be mentioned.
All keys and buttons work perfectly.
Battery compartment clean.

2 channel Sequencer
Plays both the internal synth and also an external synth via CV and gate out using one channel while at the same time playing a second external synth with a totally different sequence using the external CV and gate outputs.

Tape Save/Load
Even though most users might consider the Tape in/out a bit redundant I think it is very useful as sequences can be saved/loaded using a sampler or audio channel from a DAW instead of tape, just record the data as audio and you can build a library of acid lines to load in seconds.

Sync In/Out
One Roland sync input and two sync outputs will allow the MC-202 to clock from an external device while it sends clock to two other devices

CV/Gate in
Play the internal synth and record realtime sequences using a full size keyboard

CV/Gate Out X 2
Play both Sequencer parts on external synths"

CLICK FOR MORE »

Dreadbox Erebus - Paraphonic in some strange way

Published on Nov 5, 2017 Martin Jagl

"Here I use the MODWHEEL-signals to play OSC2 independently from OSC1.

- Connect MOD (out) to OSC2 (in)

Setup in your DAW:

- only one MIDI channel for OSC1 (real note values) and MODWHEEL values

There are no fixed settings to get your desired note values for OSC2.
Its depending on the position of your „MOD DEPHT“ knob.
With a little trial and error, you will roughly know, which is a third, a fifth, an octave - and so on.

In this way you can also create a faked sample & hold effect. (send it from MOD to VCF)"