Korg - Prologue - Summer NAMM 2018 - Midiverse - TV

Published on Jul 7, 2018 Midiverse - TV

"What's up everybody? Welcome to Midiverse - TV, today we're at the Summer NAMM show in Nashville, TN. In this video we 're going to check out the Prologue Polyphonic Synthesizer from Korg."

X1L3 - WRECKAGE - power electronics and harsh noise eurorack module

Published on Jul 7, 2018 X1L3

"A skim through the components of wreckage.

Originally given away with the first ten shard modules sold. The internals have been re worked to run at about ten times the speed of the initial design. Making for a somewhat more brutal and psychotic animal :)


Both flying solo and with cv modulation support from several soundmachines LP1 lightplane modules..To wrap it up it's put side by side with a shard module, being fed into the shard audio input.

6 x oscillators - 3 x fragments 3 x shards. CV over pitch of each osc with built in attenuation.
Atrophy chaos amplification.

Presented here in a few short sessions. Initially all hands on and later using cv automation and manual manipulation to make it do what it does best.

Clean through the run with no fx other than the intro section and fade out."

PHASER White Line Module DEMO / DREADBOX

Published on Jul 7, 2018 Dreadbox

Abyss analog phase shifter
4-stage
2 wave LFO
Current Draw: 15mA (at +12V) / 12mA (at -12V)
12HP

SPLASH White Line Module DEMO / DREADBOX

Published on Jul 7, 2018 Dreadbox

Nyx’s Reverb Effect
Unique Design by Crazy Tube Circuits (as found on Splash Mk3)
3 different reverb algorithms fully customizable via decay and excite controls
Algorithm I: The “exciter”. From a touch of ambience to spacious pad effect, especially on extreme settings.
Algorithm II: Moderate sized reverb. From a spring style reverb up to room and hall
Algorithm III : Large reverb. From hall to ambience
Current Draw: 30mA (at +12V) / 15mA (at -12V)
8HP

ENVELOPE White Line Module DEMO / DREADBOX

Published on Jul 7, 2018 Dreadbox

Standard ADSR envelope
Manual trigger
Bipolar output
Current Draw: 12mA (at +12V) / 10mA (at -12V)
8H

Kaivo Patch Test by BobSwanS

"I am making a set of patches for Madrona Labs Kaivo.

This is 2 patches i created today, they are played live at the same time with the one midi keyboard. I put a bit of reverb on both patches and sent them both into black box hg2"

Doepfer A-196 Phase Locked Loop [Episode 69]

Published on Jul 7, 2018 CatSynth TV

"An explanation and demo of the often misunderstood Doepfer A-196 Phase Locked Loop (PLL) module. We give a brief definition of a PLL, and show how this maps to the different sections of the module. We then launch into a series of demos of the A-196, first with a simple square wave input, then a more complex signal from the Sputnik Dual Oscillator, and finally the Arturia MiniBrute 2 (with the Brute Factor turned up). Throughout, we explore the different phase-comparitor options on the module, including the basic XOR and more complex proprietary circuit.

Scope provided by Mordax DATA module. In all examples, the input signal is red and the A-196 PLL signal is green.

For more synthesizer demos, please subscribe to this channel and visit www.catsynth.com.

From Doepfer's website on A-196:
"this is how a pll works: the output of the internal vco (linear cv control, rectangle output) is compared with an external signal (e.g. the rectangle output of a a-110 vco) in the so-called phase comparator (pc). the output of the phase comparator is a digital signal (low/high/tristate) that indicates if the frequency resp. phase difference of the two input signals is negative, zero or positive. the output of the phase comparator is processed by a low pass filter (lpf) to generate a smooth voltage that is used to control the frequency of the internal vco. the 3 units vco, pc and lpf form a feedback loop that works like this: the control voltage (output of the lpf) increases as long as the external frequency is higher than the frequency of the internal vco und stops increasing when both frequencies become identical. the control voltage decreases as long as the external frequency is lower than the frequency of the internal vco und stops decreasing when both frequencies become identical"

For more information on phase locked loops, please check out this tutorial from Electronics Notes: https://www.electronics-notes.com/art....

You can also find a basic description at https://en.wikipedia.org/wiki/Phase-l...

PLL block diagram from Wikipedia Article."

WORNG LRMSMSLR Mid-Side Encoder-Decoder Thonk DIY KIT Build+Patch Test - Eurorack Synth DIY

Published on Jul 7, 2018 SonicVoltage

https://www.thonk.co.uk

"WORNG Electronics LRMSMSLR Mid-Side Encoder-Decoder Eurorack Module 'Thonk' DIY KIT Build Steps and Test Patch Video (2018)

Mid/side processing is extremely useful and common practice in mixing and mastering. It allows you to process the Mid Content and Side content of your stereo signal independently. For example, in the patch I used to test my WORNG LRMSMSLR DIY KIT purchased from thonk.co.uk I use the LRMSMSLR Eurorack Module to add AJH GEMINI 2412 Filtering to the Mid content of my stereo signal and only to the Mid Content. At the same time I am adding Fuzz Distortion only to the Side content of the stereo signal by sending the SIDE signal through the Retro Mechanical Labs Electron Fuzz Custom EFCCV Eurorack Module

But that’s just the start, there is a lot you can do with the ability to press Mid and Side content of a stereo signal, the WORNG LRMSMSLR is an extremely useful tool opening up a lot of creative doors.

WORNG Electronics LRMSMSLR DIY KIT BUILD INDEX:

CLICK FOR MORE »

Ian Taylor - Eurorack Synth Modules - Synthesized 2018

Published on Jul 7, 2018 Synthesized

"Jason Fitzpatrick talks to Ian Taylor about his Eurorack Modular Synth system ..."

Oberheim OB-Mx Analog 12 Voice Synthesizer Synth & Box Owned by Lyle Mays

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

S/N: MX001441
Version 1.04
6 Voice Cards = 12 Voices (VCO73468, VCO73469, VCO73470, VCO73471, VCO73472, VCO73473)
Original Box
Power IEC Cord

CLICK FOR MORE »