Just Sounds: KORG minilogue xd Keyboard + minilogue xd Module Poly Chained

Published on Jul 14, 2019 Noisegate

"We poly chained Korg’s Minilogue xd keyboard synth to the New Minilogue xd module to create a monster synth setup.

Here is how it sounds..."

Stranger Things Theme - Juno 60, Modular Synthesizer & Nord Lead / Electro

Published on Jul 14, 2019 Autotross

"Live cover of the main title / intro theme song from the Stranger Things soundtrack using some of the same instruments as the composers.

More retro soundtrack inspired tunes here: https://autotross.bandcamp.com/"

nonlinearcircuits Cellular Automata 1

Published on Jul 14, 2019 cirtcele

"NLC Cellular Automata module demo. It can be used as a CV pattern and gate generator. There is little control over the patterns other than feeding signals into the 4 seed inputs"

via nonlinearcircuits

"This is a 16 cell gate and pattern generator using cellular automata rules 90 & 150. It will run thru a process driven by a clock signal and requires a signal on one of the seed inputs (anything crossing 1V) to start a new process or alter the current one.
A process without seeds may run for hours or minutes, depending upon the start point and clock rate.

There are 3 CV outputs, two based on what is happening on each half of the circuit, one reflects the pattern created by the active cells. Each cell has a gate output.

The circuit uses CMOS chips and op amps, no microprocessors. It is a big build!

PCB set = USD25
panel = USD23

assembled = USD280"

Synth Rorschach #66: Lauri Glocke and the Apollo 11 Moon Landing

This one is in via long time MATRIXSYNTH reader loscha, spotted it in this article: "How the Apollo 11 Moon landing was achieved with the vital help of Carnarvon Tracking Station"

"PHOTO: Lauri Glocke went from working as a waitress to an equipment operator at the base. (Supplied: Lauri Glocke)"

And: "For Lauri Glocke, who was aged just 15 when the Carnarvon base opened, it provided an extraordinary opportunity."


Reminds me of the recently posted stacked EMS Rehberg Analyse-Filterbank B1-IIs, but with knobs instead of sliders.  The bottom section also reminds me of a white Crumar Bit 01 rack synth.

Roland TB-303 Bass Line Synthesizer w/ The Beast Mod

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The Beast mods take this TB-303 to the next level. Comparable to the Devilfish mods but with its own unique feature set. One of the biggest complaints with the stock TB-303 is the limited sound palette, but with these mods you can explore a whole new dimension of tones. Also lots of added in/outputs to interact with your other analog and modular gear...

Mods include:
Custom Black case
Gate / Slide / Accent LEDs
Rear CV inputs: Gate in, CV in, Filter CV in, Accent in, and Slide in
VCF Mod Depth
VCF Mod Source: Square / Off / Saw
Transpose Pitch by an Octave: Up/down
VCA Decay
Accent Decay
Overdrive
OSC Out (square/saw)
Filter In
Filter Out
Accent Push Button Trigger
Slide Push Button Trigger"

CLICK FOR MORE »

Moog Etherwave PLUS Theremin | With CV Synth Control

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The "PLUS" adds external CV pitch and volume 1/4" outputs located on the bottom of the instrument. You can use this feature to great effect to control external MOOG synths as well as anything else that takes a CV input.

Includes everything from the original packaging including the sealed Clara Rockmore DVD and the small red etherwave internal calibration tool.

The original box is also included but unfortunately it was used to pack and ship the unit by the original seller, so it is in less than perfect condition. The instrument itself however looks and plays great and has been fully tested. You will have a lot of fun with this, especially if you have some external gear to control with it."

CLICK FOR MORE »

Roland System 100 101

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

SNs 673448, 490665, 520789

- modules: 101, 102 and 104
- Sliders a bit scratchy and keyboard not working (I haven’t played it in 5+ years - was working back then - just set up again to sell and not working now.. VCO, LFO and other sections working but will need reconditioning too
- a few external scratches and some oxidisation but generally in good external condition - i.e. straight body etc

CLICK FOR MORE »

Roland S-50 with Monitor & DT-100 Promo Shot / Ad

via @IvanTrajkovic2

"before software, was this..."

This one appears to be the image used in this ad.

CS01 and friends ...

via @IvanTrajkovic2


It appears to be the same image minus the text in this German YAMAHA CS-01 / MA-10 / MM-10 Ad.

EMS Rehberg Analyse-Filterbank B1-II pair with matched serial numbers

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

Another one in via M Me. I believe these are the first to be featured on the site. Anyone know when they were produced? I'm not finding them on the EMS Rehberg site.

"EMS Rehberg Analyse-Filterbank B1-II pair (2) available for sale! These units are ultra rare and it’s probably the only chance to find two with matched serial numbers. Both units are just been serviced and in perfect working condition.

The building quality is impressive with those long Penny & Giles faders, Pikatron and Haufe transformers and the Reticon filter chips inside. This are high-end studio effects with a phenomenal sound...

Both units are working on 220v and the serial numbers are: 223 & 224."

Pic of the inside below.

CLICK FOR MORE »