MATRIXSYNTH

Vintage Moog Model 15 - almost final systematic test w drone jam at end

video upload by tonetweakers

"Here’s the real vintage Moog model 15 we meticulously refurbished a few years back and sold to our client just recently. we hoped this would be its final test, but while filming, I noticed a couple really minor things that’ll be fast and easy to sort out. (One cutoff freq pot crackled slightly, we need to make sure we can’t improve the octave switch tuning (which is the same across all 3 oscillators) and we need to check oscillator tuning with an external 1 volt per octave control voltage source). The jacks themselves are all fine, but a couple of the cables it was tested with are dirty and caused a bit of crackle. (These cables aren’t part of this sale).

We meticulously service and systematically test our high end gear multiple times before it leaves here so it meets and often exceeds our customers expectations.

Tone Tweakers Inc.
http://www.tonetweakers.com"

Tone Tweakers on Reverb | Tone Tweakers on Ebay

Facehugger r013 Chain2 demo

video upload by flightofharmony

https://flightofharmony.com/

Update: "Re-upload because the text wasn't visible."

"The chaining feature of the Facehugger function generator is working!
This is a two-unit demo, showing some of the features and use of the Tail output for emphasis

OBS output the file in 640x480 for some reason, my apologies. Not gonna redo a pre-beta demo video though.

Caption text:
00:15 In this video, the Head Out is connected to the Infernal Noise Machine VCO CV input. Next, the Tail Out is connected to the INM IMP Frequency CV input, adding emphasis to the notes played by the Tail stages.

00:33 The Facehuggers are chained (in series) via the rear chaining headers. The Head unit outputs all stages, while the Body and Tail units only output their respective stages.

00:43 The controls of each unit only affect the output of that unit - Length, Level, Speed, Curve, Root, Scale, Direction, Glide, etc. Trigger and Gate signals are rerouted to the Head unit and start/restart/maintain the full sequence.

1:36 Connecting the Tail Out to the INM VCA2 CV input

1:49 Now changing various control settings - Direction, Root, Scale, Curve.

3:08 That's it for now, thanks for watching!
Next will be a demo of a 3-unit chain, after I get the third unit working."

Malstrom ARKAN / dual ringmod VCA with variable curve / smart voltage utility hub

video upload by BRiES

"This video is all about the features of ARKAN, a dual voltage polarizer by Malstrom. ARKAN is a two channel four quadrant multiplier (bipolar vca or ring modulator) with built-in amplification, clipping, ofsetting, inversion, ... and a variable curve response (linear - exponential). It can be used to clip, scale, attenuate, reshape, mix or straight up mangle the stuff you send through one of it's several inputs."

Hordijk Random Moments

video upload by Todd Barton

"Always experimenting with random manifestations in the Hordijk system. This time focused on the B envelope of the Dual Envelope module. It's fun to try and anticipate what and when something comes next."

Sonicware LoFi-6 Relaxing Ambient Glitch Jam

video upload by Dj Puzzle

"Sonicware Lofi-6 in the mix. As well as 1010music Razzmatazz ( the box I made presets for ), Sonicware SmplTrek, Pocket Operator Sub, and AUM on my iPad for mixing and Turnado effects."

Haken Audio ContinuuMini with Kenton USB Midi host MK 3

video upload by Ebotronix

"today the Kenton Midi host MK III has landed.
it needs some time to find my setting.
when I connect the HA ContinuuMini to der USB Host the ContinuuMini Display shows error.
next step I used a Lindy USB hub.
now the ContinuuMini works.
next step was to connect two Doepfer R2m Ribbon Controller to
Yamaha MCS 2 ( Midi Control Station with two input's) to the Kenton USB host Midi Input.
the kenton kept crashing and i had to reset it many time .
in the video pull of the USB power cable at 1.23, 3.18 and 4.50

Haken Audio ContinuuMini with Kenton USB Midi Host MK3
and two Doepfer R2m / Mutable Instruments Midipal
to control the EaganMatrix modular digital synthesizer.
the ContinuuMini doesn't work directly with the Kenton Midi Host
but it works with the Lindy USB hub
at 1.23, 3.18 and 4.50 the Kenton hung up,
to reset it I had to interrupt the USB power supply
Doepfer R2m #1 to Mutable Instruments Midipal ( 4 voice chords)
Doepfer R2m #2 into the second MCS input
Yamaha MCS 2
FX: Eventide Time Factor
Strymon 2x Cloudburst
G minor scale
vid # 2257"

Arturia MatrixBrute 49-Key Synthesizer w/ Original Box

Note: Auction links are affiliate links for which the site may be compensated.

via SYNTH CITY Reverb

Note auction links are affiliate links. See the site's privacy policy for more info.

CLICK FOR MORE »

Yamaha CS-30 Monophonic Synthesizer SN 2894

Note: Auction links are affiliate links for which the site may be compensated.

via SYNTH CITY Reverb

Note auction links are affiliate links. See the site's privacy policy for more info.

"Yamaha CS-30, a behemoth of a mono synth w/ an analog 8-step sequencer and tons of tone shaping possibilities! This synth is 100v 50/60hz, however this is fully functional without a step converter in North America. This synth is in fantastic working and cosmetic condition over all. Getting harder to find."

CLICK FOR MORE »

1988 Ensoniq ESQ-1 Digital Wave Synthesizer w/ ESQ VOICE-80 VOL.1 Cart

Note: Auction links are affiliate links for which the site may be compensated.

via SYNTH CITY Reverb

Note auction links are affiliate links. See the site's privacy policy for more info.

"1988 Ensoniq ESQ-1, winning combination of digital oscillators through analog filters and tons of modulation! There is also a polyphonic sequencer that can run multiple voices or external gear. Classic piece if gear, includes bonus voice cartridge and AC power cable. Running OS 3.5"

CLICK FOR MORE »